Thanks for registering your Titan Propel!

Now that you have registered your kayak, let us help you create the best experience on the water

Accessories

Adapter Kit Slugs for Groove 1/4-20

The Groove Adapter Slugs Kit allows almost any gear to be mounted on the Versa Board Groove Kit mounting system

$9.00

Back Pack, Behind Seat

The First Class Seat Pack contours perfectly to the seat frame offering multiple easily accessible storage options. The front has two mesh pockets, the vertical zipper along the side makes it easy to get inside the main pocket without turning around, and the large back pocket is an excellent location for a hydration bladder or other items you want to keep on hand. SKU: APAC001 

$129.00

Bow Mount, Titans, Slayer Max 10/12.5, Slayer Propel 10

There are 3 accessory patterns that come pre-drilled (Micro Power Pole, Motorguide quick release bracket, and the Motorguide 6 bolt pattern). All stainless steel hardware is included to mount the plate to the kayak. This mount fits the Titans and the Slayer Propel Max 12.5. *Note: The install requires holes to be drilled into the kayak and does not void the Hull Warranty.

$129.00

Cam-Lok Paddle Holder Set Assembly

Cam-Lok Paddle Holders (1 set of two holders) are ingeniously designed to be versatile and easily re-positioned. They can be used in any Groove Track and allow you to keep your paddle lengthwise or across your boat. The internal rubber securely grips and cushions without scratching or generating noise. So easy to use, they make stowing and retrieving paddles practically effortless. Also great for holding rod ends!
$19.00

Crank Seal Replacement Kit

Includes 2 External Seals and 2 Internal Retaining Rings.
SKU: APRO008
$25.00

Hi-Performance Rudder Blade Kit, 14" w/ 5" post, Slayer MAX

Comes with X-cut foam rudder seal and rudder bolt.
$39.99

High Frame Seat

Look for your boat model under the size selection.

Slayer Max 10/12 seat is not for the earlier Slayer Max 12 with roto molded base.

***The Hi-Low replaces the Falcon, Slayer 12/14.5, and FX 12/15


$199.00

Ketch ID

This product will fit Ketch X, Karbonate, and board & cradle (All sizes)
Slides on your Ketch board for easy maneuvering
Adjustable to fight against sunlight
Comes with ID Card holder
Note: Before applying dual loc to clear ID Holder, clean surface for better adhesion
$29.99

Ketch Keeper

Mount your Ketch Board anywhere
Fits all Ketch Boards
Standard Kit comes with 10-32 3/8” bolts 10-32 t-nuts for t-track X2 each per package.
Krate Kit comes with 10-32 x 1” Nylon lock nuts Washers X4 of each per package.
Stainless Steel Hardware
$26.99

Kit ProPel Lubrication

To keep your Propel Pedal Drive (patent pending) operating in peak condition, you should keep it clean and periodically add lubricant to the crank. This kit includes the tools and lubricant used in the general maintenance needed to ensure optimal performance for the lifetime of your Propel system(patent pending).
- Includes 3.5 oz. of Teflon lubricant, pump with extended nozzle and 3/16" allen key to access fill port
SKU: AKIT001
$49.00

Kit Replacement Propeller Bullnose 2019

Easy Cruz Replacement Propeller - Bullnose
SKU: APRO002
$29.00

Latch kit, Finger Loop Pull Sliders Only 2021- Set of 3

Set of 3 Propel Pedal Drive thwart locking latches, finger loop pull style.  Bases and hardware not included. 




$12.99

Native Kayak Kushion

-Light weight patented technology for more enjoyment

- High quality grade sewing

-Tactical straps with anti slip cam buckles

-Breathable material

-Zipper accessibility

-Non-collapsible & functional

$64.99

Native Watercraft Karbonate Board

The Ketch Karbonate Measuring Board comes in a high-visibility yellow color that is easy to read and extremely durable. The polycarbonate material of the Karbonate Measuring Board is built to last and comes with a built-in cradle to keep your catch steady and protected so you can quickly make accurate measurements on the water
  • Native Watercraft Branded
  • Available in 26" and 32" sizes
  • KBF Approved
  • High color yellow that’s easy to read and extremely durable.
  • Built in Cradle
  • Compatible with floating kit (coming soon!)
$43.99

Native Watercraft Kayak Covers

Native Watercraft kayak covers are custom made to fit our kayaks just right. Each cover includes a full set of cover tie down straps (one for each loop set) that can be used to secure the cover when traveling through the sewn in loops on the cover. All covers are made in USA and created with marine-grade anti-wick thread that includes double-stitched construction and 4-ply join seams.
$184.99

Native Watercraft Ketch X Board

Native Watercraft Branded
Tether holes CNC machined on fence end of the board.
High color contrast that’s easy to read and extremely durable.
Tournament numbers on top of Kradle edge
Ketch Kradle incorporated into board (all one piece)
Widened fence

$69.99

Native Watercraft Springblade Rudder System

We are excited to offer the new Native Watercraft Springblade Rudder Accessory! The new rudder is compatible with the Slayer Propel 10, Slayer Propel 13, Titan Propel 10.5, Titan Propel 12, Titan Propel 13.5, Slayer Propel Max 10 and Slayer Propel Max 12.5.
 
Here are some of the benefits of the Springblade Rudder:
  • Easier to turn handle
  • Quicker turning
  • Great tracking
  • Steer the boat in the stowed or deployed position, which helps with steering in shallow water
  • Tightened turning radius
  • Easy installation
  • Better turning performance in rough conditions
  • Improved tension lock for steering cables
  • Stow and deploy from your seat
 
ARUD600S - Native Watercraft Springblade Rudder System, 3" (Short Shaft)
  • Fits: Slayer Propel 10/13, Titan Propel 10.5/12/13.5
  • External Installation
  • Installation video
    •  
ARUD600L - Native Watercraft Springblade Rudder System, 5" (Long Shaft)
  • Fits TitanX 10.5/12.5, Slayer Propel Max 10, NEW FOR 2022 SLAYER PROPEL MAX 12.5,  PRE 2022 SLAYER MAX 12.5 (single electronics switch panel MUST BE EXTERNALLY INSTALLED - PLEASE WATCH VIDEO ABOVE FOR THIS INSTALLATION)
  • Internal Installation
  • Installation Video for the Slayer Propel Max 10
    •  
  • Installation Video for the NEW FOR 2022 SLAYER PROPEL MAX 12.5 (Dual Electronics Switch Panel)
    •  
$179.99

NRS Chinook Fishing PFD

The evolution of NRS Chinook Fishing PFD, our best-selling life jacket, depends on our designers listening to the reviews of anglers around the world. And we do. With reconfigured pocket designs, the Chinook makes catching the adventure safer and more effective on the water.

  • The Chinook is a Type III, medium profile life jacket delivering 16.5 pounds of flotation.
  • Zippered front entry for quick donning and six adjustment points for a customized fit.
  • PlushFit™ foam and a high-back design combine to create an extremely comfortable vest for any type of raft or kayak seat.
  • A mesh lower-back offers added ventilation on warm days.
  • Two large clamshell pockets, sized for tackle boxes, feature updated internal organization based on angler reviews.
  • A single, exterior pocket on the angler's right side offers easily accessible storage.
  • A fifth, tool holder pocket offers quick access to pliers, line cutters or other fishing gadgets and secures with a hook-and-loop fastener.
  • Also features a rod holder, strobe attachment point, reflective accents and knife lash tab.
$119.95

Pedal Upgrade Kit

This black pedal is included on all 701 series Propel Pedal Drive units and retrofittable to all 301 series or newer Propel Pedal Drive Units. We have included two NEW colors for 2023 as accessories! Check them out!
$39.99

Propel Indexer

Zero-draft in the shallows for your Propel has never been easier. Simply press down on the indexer to line up the prop and raise the unit up and out of the way. This Propel Indexer will work with all Propel Pedal Drive props.
SKU: APRO010
$30.00

Railmount Storage, 3 pocket Toolholder 2018

Hand-sewn in Fletcher, NC USA. Provides three slots for tool storage (tools not included). Attaches to Groove Tracks with included hardware.
- Mounts to groove tracks on select Native kayak models.
- Includes hand-sewn tool holder, two thumb screws, and two slider slugs
SKU: ASTO020
$29.99

Rod Butt Lay

These rod butt lays originated with our Titan series, but in fact are adaptable to other boats. These connect to the boat at the aluminum side rail. The single fits the Titan Propel 10.5 and Titan Propel 12. The double fits the Titan Propel 13.5.
$34.99

Rudder Cable Replacement Kit, Propel Models

Replacement rudder cable for Propel kayak models. Includes cable and two crimps.
SKU: ACAB001
$19.99

Seat Back Tackle Box Storage

Attaches to Native Watercraft frame seats for added tackle storage. Fits onto back of all current Native Watercraft model seats except Manta Ray Angler 12s.
SKU: ASTO015
$69.00

Sidekick Rod Butt Lay


Rod butt lay sets for use with Sidekick set ups. Please choose a single or double recess.

Double Overmount pictured.




SKU: ABUT004, ABUT005


$29.99

Steering Conversion Kit, HMPE line 2019

Rudder line replacement kit for converting to cordage from the metal cable.





$49.99

Titan Propel 10.5/12 2019 and earlier Rudder Gasket Kit- All Plastic Rudder.

Replacement gasket (set of 3) for Titan Propel 10.5 / 12
SKU: AGAS001
$5.99

Titan Propel Rod Tip Protectors (set)- Titan 13.5

  • Replacement Rod Tip Protectors for the Titan Propels.
$49.99

Tournament Rail Tool and Tackle Caddy

Looking for quick access to tools and tackle? This pouch attaches using the Groove Track system and overhangs into the kayak for easy access. Fits the Slayer Propel 10, Slayer Propel 13, Manta Ray Propel Angler 12, Slayer 12, Slayer 14. 5 models. Tools and tackle box not included.
SKU: ASTO012
$59.00

Transom Thwart Motor Mount - 14"

This motor mount will allow you to use an electric motor with your Native Watercraft Propel kayak.


The 14″ Thwart Mount for the Slayer Propel Max 10, Slayer Propel Max 12.5, Titan Propel 10.5, Titan Propel 12, Titan Propel 13.5, Ultimate FX Propel 13, Manta Ray Propel 12, and Slayer Propel 12 LT.

$89.99

Trolley Anchor System

The Anchor Trolley allows anglers to change the direction they are fishing just by sliding the trolley up or down the length of their boat instead of by moving their anchor. You can control the pulleys while seated to fish 360 degrees around every great fishing spot.
SKU: AATR112
$39.00

Upper Transmission Rebuild Kit

Includes Upper Gear Assembly, Bearings, Upper Transmission Gear. Increases the efficiency and performance of well-used drives.
SKU: APRO005
$165.00

Welding Rods - Pack of 6

Pack of 6 welding rods
$9.99

YakAttack AR Tube Rod Holder with Track Mounted LockNLoad Mounting System

The YakAttack Advanced Rod Tube™ is our take on the classic tube-style rod holder designed for spinning and casting rods and reels. It features a gimbal lock that flips into place to accommodate longer rods as well as multiple attachment points on the bottom side for rod leashes, increasing gear security. Made from marine grade polymers the AR Tube is built to last and comes with our Built for Life Guarantee. The AR Rod Tube is track-mount ready, and features the LockNLoad™ Mounting System. The LockNLoad system offers unrivaled track-mount security, but its also incredibly easy to adjust. GearTrac not included

There are 3 modes: locked, adjustment, and removal.

- From locked mode, simply squeeze a lever to go into adjustment mode.

- In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you are back in locked mode.

- To go to removal mode, flip the lever out, and the system easily slides off of the track mount.

$41.95

YakAttack Cam Straps 12 Feet 2 Pack

The YakAttack Cam Straps are an essential for any kayak angler. The high-quality polyester webbing has a higher break strength, superior resistance to abrasion, less stretch, better UV resistance, and increased water resistance compared to common polypropylene straps sold by most companies. The custom rubber buckle cover helps prevent dents and scratches while car topping.

  • Sold in a 2 pack
  • 12 ft. long
  • 1 inch wide webbing
  • Made with high-quality polyester webbing
  • Custom rubber buckle cover
  • Buckle and webbing are made in China
  • Buckle cover and sewing are done in the USA
  • SKU: YEP-1006-12
$22.95

YakAttack CatchNRelease Drip Rings

YakAttack CatchNRelease Drip Ring - Pair (YEP-1001)

This deep dish CatchNRelease Drip Ring features a unique design which catches water coming off the paddle blade in the high position, and releases it back into the water during your downstroke. We think this is the driest drip ring on the market. Soft and supple, the CatchNRelease Drip Ring is designed to fit all common sized paddle shafts including Werner, Bending Branches, and other popular brands of kayak paddles.

  • Sold in a two pack
  • Fits standard diameter kayak paddles
  • Made in the USA
  • SKU: YEP-1001
$9.95

YakAttack Complete LockNLoad Track Base

YakAttack’s LockNLoad™ mounting system, is exactly what you would expect from the leader in track mounting technology. Offering unrivaled track mount security and adjustability, the patent pending LockNLoad™ track base is the most advanced track mount ever created. You want no slip? No problem. The LockNLoad track base attaches quickly and easily with a single MightyBolt™, but will not accidentally rotate or loosen from the track, even when your trolling rod takes a big hit. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6).

  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: LNL-1001
$19.95

YakAttack DoubleHeader Track Mount

In typical YakAttack fashion, what started as an idea for a single offset RotoGrip Paddle Holder resulted in a product with a bit more versatility. The end result of the DoubleHeader Track Mount was a unique addition to the YakAttack product line that allows the ability to attach various accessories using a single attachment point. If you already own two RotoGrip Paddle Holders, then simply remove the rubber washer included with your paddle holders, insert the MightyBolt through the underside of the DoubleHeader, and tighten the body of the RotoGrip. The DoubleHeader in that configuration provides the perfect offset paddle holder solution moving your paddle off the side of your kayak, freeing up track space. Let’s say you want to add dual Omega Rod Holders for crappie fishing. The mounting holes at the end of the DoubleHeader are LockNLoad compatible and allow for easy attachment of LockNLoad accessories like the Omega or Omega Pro. Looking to maximize the number of rods on your kayak for tournament day? The DoubleHeader Track Mount serves as the perfect mounting system for dual AR Tube Rod Holders.  

If you are tight on track space, the DoubleHeader includes an additional feature to add LockNLoad accessories like YakAttack rod holders, camera mounts, and more. Simply replace the stock knob and MightyBolt from the DoubleHeader with the LockNLoad base of a rod holder or other accessories, and you are able to have multiple attachments on a short section of track or a single point of attachment like a MightyMount II. The DoubleHeader track mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory-installed kayak track.

Included with the DoubleHeader are two different Track Disk. These two Track Disks are designed to provide a snug fit in either the standard YakAttack GearTrac (GT90, GTSL90, GT175, MightyMount XL) or the wider opening of the YakAttack Top Loading family of GearTrac (GTTL90 and GTTL175). If a track system came included with your kayak, try both of them and determine which one will provide the best fit.

The DoubleHeader Track Mount is made in the USA from marine grade polymers and is backed by our Built for Life Guarantee.

  • Made in the USA
  • Built for Life Guarantee
  • Single point of attachment
  • LockNLoad Compatible
  • Includes two sizes of Track Disks
  • DoubleHeader is 8.25” wide
  • The DoubleHeader Track Mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory installed kayak track.
$19.95

YakAttack DoubleHeader w/ Dual RotoGrips

In typical YakAttack fashion, they started as an idea for a single offset RotoGrip Paddle Holder resulted in a product with a bit more versatility. The DoubleHeader track mount can serve several different purposes, but in this case, it is the foundation for the perfect offset paddle holder solution that our customers have been dreaming of ever since the launch of the RotoGrip several years back. Compatible with standard diameter kayak paddles the RotoGrip Paddle Holder has become the most widely used paddle holder in the industry. The RotoGrip is a simple yet highly effective paddle holder solution, but many paddlers wanted to use one or two RotoGrips on a single side of the kayak. When using two RotoGrips on a single piece of track, you get a nice tight hold, but you also cover up the entire length of the track with your paddle, rendering open track space useless. The DoubleHeader in this configuration eliminates that problem entirely and offsets the paddle holders off the kayak allowing for the full functionality of the remaining track space for other accessories. If you are tight on track space, the DoubleHeader includes an additional feature to add LockNLoad accessories like YakAttack rod holders, camera mounts, and more. Simply replace the stock knob from the DoubleHeader with the LockNLoad base of a rod holder or other accessories, and you are able to have multiple attachments on a short section of track or a single point of attachment like a MightyMount II. The DoubleHeader track mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory installed kayak track.

Included with the DoubleHeader are two different Track Disk. These two Track Disks are designed to provide a snug fit in either the standard YakAttack GearTrac (GT90, GTSL90, GT175, MightyMount XL) or the wider opening of the YakAttack Top Loading family of GearTrac (GTTL90 and GTTL175). If a track system came included with your kayak, try both of them and determine which one will provide the best fit.

For added paddle security, included with the DoubleHeader and RotoGrip’s are two SnapNStrap Security Tethers. To secure your paddle unhook the bungee tab from the stored position on the base of the DoubleHeader, wrap it around the shaft of your paddle, and loop it over the tab on the outward side of the RotoGrip. This feature will come in handy for kayakers using pedal drive kayaks like a Hobie or motors like a Torqeedo or MotorGuide. In those situations, a paddle might not be needed all the time, so the security tethers provide extra peace of mind knowing your paddle is safe and sound. If you need quick access to your paddle at a moment's notice, the tethers have a stored position, so they do not get in the way when inserting or removing your paddle from the dual RotoGrips.

The DoubleHeader with Dual RotoGrip Paddle Holders is made in the USA from marine grade polymers and is backed by our Built for Life Guarantee.      

  • Made in the USA
  • Built for Life Guarantee
  • Single point of attachment
  • LockNLoad Compatible
  • Includes two RotoGrip Paddle Holders
  • Includes two SnapNStrap Security Tethers
  • Includes two sizes of Track Disks
  • Perfect for anglers with pedal kayaks or motors
  • Compatible with standard diameter kayak paddles
  • DoubleHeader is 8.25” wide
  • The DoubleHeader track mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory installed kayak track.
$39.95

YakAttack GearTrac Hardware Kit

Includes four of each: Convertible Knobs, 1-1/2'' MightyBolts, Track Nuts, 1-1/4'' Socket Head Cap Screws. All standard 1/4-20 thread. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6).
  • 4 Stainless Steel MightyBolts
  • 4 Convertible Knobs
  • 4 Track Nuts
  • 4 Socket Head Cap Screws
  • All Standard 1/4-20 Thread
  • Patent Pending
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: HRC-1004
$24.95

YakAttack GT Cleat XL

The larger and heavier-duty version to our original GT Cleat, the GT Cleat XL™ is our simple and highly effective answer to the issue of line management. It attaches to all YakAttack® GearTrac™, MightyMount XL tracks, and most other kayak track systems. The GT Cleat XL makes for a perfect companion to our highly popular LeverLoc™ Anchor Trolley and is a low profile, easy to attach and adjust anchor line cleat. The underside of the cleat features two tabs and a rubber washer helping keep the cleat from rotating and sliding in the track from anchor line tension.  Best used with 1/2" rope.

  • Compatible with YakAttack GearTrac, MightyMount, and most other factory-installed kayak track systems
  • Best used with 1/2" rope
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: MTA-1004
$19.95

YakAttack HD Mount LockNLoad

YakAttack’s LockNLoad™ mounting system is exactly what you would expect from the leader in track mounting technology. Now, enjoy the versatility and ingenuity of the LockNLoad System in heavy duty applications such as trolling for big game. Due to the two MightyBolt attachment points, the HD Track Mount gives you more gear security than ever before! No track? No problem! You can easily remove the two MightyBolts and use hardware to quickly deck mount your YakAttack rod holder or fish finder, as well as using holes from old-school deck mounts to mount the HD Track Mount crossways. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack and a six pack.

 

  • Two MightyBolt attachment points gives you better gear security
  • Not for use with under 8" of track
  • For Heavy Duty applications
  • Can be used for deck mounting
  • Utilizes pre-drilled holes from old-school deck mounts to be mounted crossways
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: LNL-1006
$19.95

YakAttack Horizontal Tie Downs

This track mounted tie-down allows a quick and easy attachment point for webbing, small ropes, and bungee in configurations in which the Vertical Tie Down is not ideal. Perfect for securing Blackpaks™, other crate systems, and large gear bags in a kayak tankwell. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack and a six pack.

  • Sold in 2 pack
  • Attaches to YakAttack® GearTrac™, MightyMounts, and most other factory installed kayak track
  • Use with 1"-1.5" webbing straps or bungee
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: AAP-1027

$19.95

YakAttack LeverLoc Anchor Trolley HD

The first anchor trolley designed specifically for the job, the YakAttack LeverLoc™ Anchor Trolley features a LeverLoc™ line clamp, which locks your trolley line in place with a simple “flip of a switch” motion. Keeping the trolley lines in line is the PadHook, a simple but clever design that combines the functionality of both a pad-eye and a hook, keeping even the tightest trolley lines in place on the side of the kayak, not over your gunwale. When not in use, the easy-knot trolley ring snaps into the base of the LeverLoc™, quietly secured until deployed. Includes 35’ of USA made 550 paracord with a highly reflective tracer. This model features the HD option, which gets you two extra PadHooks plus backing plates for the pulleys and LeverLoc™, enabling a heavy duty install when compared to the self-threading screws included in the standard kit. Features YakAttack Stealth Pulleys for super smooth operation. The use of a YakAttack Rigging Bullet, RB1032, is highly recommend for installs where the install location is out of arms reach.

  • Easy installation
  • New YakAttack Stealth Pulleys
  • 35' of highly reflective USA-made 550 paracord
  • Includes all necessary hardware for installation
  • Heavy duty
  • Includes backing plates and extra Padhooks not included in AMS-1003.
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: AMS-1004
$44.95

YakAttack Lowrance Hook2 Fish Finder Mount with Track Mounted LockNLoad Mounting

Designed to replace the factory base on Lowrance Hook2 4 and 5, Reveal 5, and Simrad Cruise 5. This Lowrance Fishfinder Mount is a simple, clean, and a highly effective solution. This mount improves on the original included mount enabling fast and easy one-handed display adjustment. Includes the LockNLoad Mounting System for maximum versatility and rigidity. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6).

  • GearTrac not included
  • Fishfinder not included
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • Patent Pending
  • SKU: FFP-1006
$49.95

YakAttack MightyMount II with FullBack plate

The MightyMount II is a low profile, highly versatile mount with a small footprint and the same hole pattern as the original MightyMount. Used for attaching accessories requiring a single t-bolt attachment point or YakAttack products that feature the LockNLoad™ mounting system like rod holders, fish finders, and more.

Mighty Mount II is 2"x2.375"x.5"
Contains all necessary hardware
$16.95

YakAttack MultiMount Cup Holder

YAKATTACK MULTIMOUNT CUP HOLDER

The YakAttack MultiMount Cup Holder quickly and easily attaches to YakAttack GearTrac, MightyMount, Native Watercraft gear track, Bonafide Kayaks Gear Track and most other kayak track systems.


Designed for maximum versatility, the MultiMount Cup Holder accepts anything from stainless steel tumblers to Nalgene Bottles to 12 oz cans and water bottles.
The MultiMount Cup Holder also makes a great place to put small tools and other items. Made from premium materials for a lifetime of use in even the harshest environments.
Keep your beverage at reach while kayak fishing with the MultiMount Cup Holder!

KEY FEATURES

  • Fits various different size beverage containers
  • Large enough to store a can with a koozie
  • GearTrac and MightyMount ready without any additional components
  • Bottle not included

$19.95

YakAttack Omega Pro Rod Holder

The YakAttack Omega Pro series rod holders are the last rod holder you’ll ever need. 

The Omega Pro adds an extension arm to help get your reel higher off the water or helps accommodate longer rod butts.

The Omega Pro Rod Holder is a truly universal solution that works flawlessly with spinning, casting, larger conventional reels, and yes – even fly rods of all sizes. A 360 degree rotating collar offers the ability to quickly secure the rod by capturing the reel, and allows spinning reels to be stowed in the natural downward position, not hung off the side. Multiple modes allow anglers to easily stage rods for quick access or lock them in for maximum security. 

The Omega Pro Rod Holder attaches to your kayak, boat, or other watercraft with YakAttack’s LockNLoad mounting system, and is exactly what you would expect from the leader in track mounting technology. 

Offering unrivaled track mount security and adjustability, the patent pending LockNLoad track base is the most advanced track mount ever created. You want no slip? No problem. The LockNLoad track base attaches quickly and easily with a single MightyBolt, but will not accidentally rotate or loosen from the track, even when your trolling rod takes a big hit. 

Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. 

There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use: 
- From locked mode, simply squeeze a lever to go into adjustment mode. 
- In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you back in locked mode. 
- To go to removal mode, flip the lever out, and the system easily slides off of the track mount. 

  • Gear Trac not included
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • Patent Pending
$39.95

YakAttack Omega Rod Holder with Track Mounted LockNLoad Mounting System

The Omega Rod Holder attaches to your kayak, boat, or other watercraft with YakAttack’s brand new LockNLoad mounting system, and is exactly what you would expect from the leader in track mounting technology. Offering unrivaled track mount security and adjustability, the patent pending LockNLoad track base is the most advanced track mount ever created. You want no slip? No problem. The LockNLoad track base attaches quickly and easily with a single MightyBolt, but will not accidentally rotate or loosen from the track, even when your trolling rod takes a big hit.

There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use:

- From locked mode, simply squeeze a lever to go into adjustment mode.
- In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you back in locked mode.
- To go to removal mode, flip the lever out, and the system easily slides off of the track mount.
$31.95

YakAttack PanFish Portrait Pro Camera Mount

The LockNLoad™ track mount system is the most innovative mounting system on the market, and is exactly what you'd expect from the industry leaders in track mounting technology. There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use:
- From locked mode, simply squeeze a lever to go into adjustment mode.
- In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you back in locked mode.
- To go to removal mode, flip the lever out, and the system easily slides off of the track mount.

The ultra-durable construction of the PanFish Portrait Pro™ is not only super lightweight - it's also incredibly rigid, reducing shake in your camera footage.

Utilizes the LockNLoad™ Track Mount System for easy on and off, angled articulation, and rotational pivoting
Durable, lightweight, and super rigid construction
Features the new YakAttack Camera Ball
For use with camera utilizing a 1/4-20 mount or GoPro Cameras
11.5" Tall
$59.95

YakAttack PanFish Pro Camera Mount

The LockNLoad™ track mount system is the most innovative mounting system on the market, and is exactly what you'd expect from the industry leaders in track mounting technology. There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use:
- From locked mode, simply squeeze a lever to go into adjustment mode.
- In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you back in locked mode.
- To go to removal mode, flip the lever out, and the system easily slides off of the track mount.



The ultra-durable aluminum construction of the PanFish Pro™ is not only super lightweight - it's also incredibly rigid, reducing shake in your camera footage.In addition, the patented design allows for one-hand rotation without loosening or tightening the product, giving you the ability to get the smoothest pan shot.

Utilizes the LockNLoad™ Track Mount System for easy on and off, angled articulation, and rotational pivoting
Durable, lightweight, and super rigid aluminum construction
Features the new YakAttack Camera Ball
It floats!
For use with camera utilizing a 1/4-20 mount or GoPro Cameras
33" Tall
$99.95

YakAttack ParkNPole 7'8"

The YakAttack ParkNPole 7'8" is the updated version of our ParkNPole 8' that better complies with UPS shipping restrictions.
 
Used as a stakeout/push pole for kayaking, this product has many great features including a floating base, a fiberglass body, and a foot and tip that are UV stable and made of wear-resistant nylon. Lightweight and incredibly durable, this product makes the perfect companion for fishing in shallow waters.
  • Foot for paddling
  • Tip for staking into the ground
  • 7' 8" long
  • .845'' Diameter Tubing
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: PNP78
$99.95

YakAttack ParkNPole Link 8'

The ParkNPole Link™ is a smarter, two-piece version of the popular 8' ParkNPole™. The two-piece construction makes transportation easy to and from the water or makes it possible to store inside the hull of your fishing kayak. For a longer option purchase the 46'' extension making the total length 12'. At 12 feet, the ParkNPole Link™ plus the extension, make for a great push pole and also helps when anchoring in deeper water. Made from specially formed fiberglass and UV stabilized, wear resistant nylon. At 1.8 lbs, it is incredibly lightweight and extremely durable.

  • 8' long
  • .845'' Diameter Tubing 
  • Purchase the 46" extension for an extended length of 12'
  • Wear-resistant nylon tip and foot with a fiberglass body
  • Weights only 1.8 lbs, yet is extremely durable.
  • The two-piece construction allows for easy transportation and storage.
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: PNPL-8
$129.95

YakAttack ParkNPole RotoGrip

Since launching the YakAttack ParkNPole a number of years ago customers have been requesting a track mounted solution to secure their stakeout pole. This product is compatible with every length of YakAttack ParkNPole including the 6', 7' 8", and 8' Link. Using our popular RotoGrip platform, larger wheels were designed to perfectly secure the 0.84” ParkNPole diameter tubing. Super low profile at 2.4" tall, the ParkNPole RotoGrip secures the shaft between two soft rollers, securing your stakeout pole quietly and with just the right amount of tension. Sold as a single pack.

To secure your ParkNPole off the side of your kayak, the ParkNPole RotoGrip pairs nicely with a set of SideArm Track Mounts or the DoubleHeader Track Mount. Compatible with YakAttack MightyMount’s, GearTrac, and most other factory installed kayak track systems and aftermarket track from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack and a six pack.

  • Utilizes the Mighty Bolt to attach to kayak track
  • 2.4" tall
  • GearTrac not included
  • Single pack
  • Patent Pending
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: GRP-1004
$16.95

YakAttack Rectangular Fish Finder Mount with Track Mounted LockNLoad Mounting System

No more ball mounts, no more slipping or rotating in the track. With the LockNLoad™ mounting system, this is the cleanest and most secure mounting solution for larger Lowrance, Garmin, and Raymarine units featuring a gimbal mount such as the Lowrance Hook2 7, Garmin Striker 9sv, and the Raymarine Axion 7. Features the LockNLoad mounting system offering ultra secure attachment.
$49.95

YakAttack Rotogrip SnapNStrap 2 Pack

The SnapNStrap Security Tether was specifically designed for the YakAttack RotoGrip Paddle Holder; RotoGrip not included. It acts as a simple hook and loop system using bungee to add extra security and peace of mind knowing your paddle is safe and secure. To attach the SnapNStrap system, simply remove the rubber washer and MightyBolt from your RotoGrip and slide on the molded frame with the two tabs facing upwards. Apply a little pressure, and the system will snap in place. From there, reassemble the washer and MightyBolt. To secure your paddle, wrap the bungee and pull tab over the shaft of your paddle and loop it over the tab of the SnapNStrap frame.

  • RotoGrip not included
  • Tool-less attachment
  • Compatible with the RotoGrip Paddle Holder
  • Sold as a 2 pack
  • Made in the USA
  • Lifetime Warranty
$7.95

YakAttack Round Base Fish Finder Mount with Track Mounted LockNLoad Mounting System

No more ball mounts, no more slipping or rotating in the track. With the LockNLoad™ mounting system this is the cleanest and most secure mounting solution for Garmin and Raymarine units featuring a 3 hole pattern round base such as the Garmin Striker 4 and the Raymarine Dragonfly 7 Pro. Features the LockNLoad mounting system offering ultra secure attachment.
$49.95

YakAttack SideArm Track Mount

The YakAttack SideArm Track Mount was born out of using existing products to solve a rigging problem. Instead of using a standard 4” Extension Arm with a longer MightyBolt to offset a RotoGrip Paddle Holder, we created an off-the-shelf solution that accomplishes the task and then some. Any YakAttack track-mounted product that uses a single MightyBolt is compatible with the MightyMount at the end of the SideArm. You can also replace the knob of the SideArm with a LockNLoad accessory like a YakAttack Omega Rod Holder or PanFish Portrait Camera Mount. This feature provides the opportunity to mount two accessories from a single point. The RotoGrip Paddle Holder and ParkNPole RotoGrip are two commonly used accessories with the SideArm Track Mount.

Included with the SideArm Track Mount are two different Track Disk. These two Track Disks are designed to provide a snug fit in either the standard YakAttack GearTrac (GT90, GTSL90, GT175, MightyMount XL) or the wider opening of the YakAttack Top Loading family of GearTrac (GTTL90 and GTTL175). If a track system was included with your kayak, try both of them and determine which one will provide the best fit. Only one Track Disk is needed on the underside of the SideArm for the mount to work as designed. In addition, the Track Disks allow for the SideArm to be mounted in any direction in relation to the track or MightyMount it is attached to. For example, you can set up the SideArm directly off the side of your kayak for a paddle holder solution or having it facing inwards and virtually 360º anywhere in between.

Compatible with YakAttack MightyMount’s, GearTrac, and most other factory installed kayak track systems and aftermarket track from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack and a six pack.

The SideArm Track Mount is made in the USA from marine grade polymers and is backed by our Built for Life Guarantee.

  • Made in the USA
  • Built for Life Guarantee
  • Single point of attachment
  • LockNLoad Compatible
  • Includes two sizes of Track Disks
  • The SideArm Track Mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory installed kayak track.
  • SKU: TMA-1003
$19.95

YakAttack SideWinder Anchor Line Reel, Includes Track Hardware and 75 Feet of 550 Paracord

Get your anchor line under control with the YakAttack SideWinder! Designed to make anchor line management simple and effective, the YakAttack SideWinder has some great features packed into a simple and effective design. The line lock groove keeps just the right amount of line deployed, and the tail rope passage means it can be deployed outside your kayak anchor trolley ring for true quick release in dangerous situations. For flat water with no current, use the track mount holes in conjunction with the included Mighty Bolts and knobs to attach the SideWinder directly to your kayak's track system..

Includes hardware for install onto your kayak's track system
Includes 75 feet of 550 paracord
14"x6.38"x0.75"
Geartrac not included
$34.95

YakAttack Surface Mount Retractor

Secure your gear without bulky leashes or floats using the YakAttack Surface Mount Retractor. This super versatile unit combines the innovation you've come to expect from YakAttack and genuine T-Reign retracting mechanism, 36" Kevlar cord, and a removable 4" tether. Designed for surface mounting, this kit comes complete with blunt end thread forming screws for threading directly into rotomolded and thermoformed kayaks.
  • Made from UV Resistant High Density Polyethylene
  • 36" Kevlar Cord
  • Removable 4" tether
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: RET-1001
$29.95

YakAttack Tie-Down Eyelets 2 pack

These tie-downs come with a Mighty Bolt base. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). Perfect as an anchoring point to secure a cooler or other accessory, as well as being a great adjustment point for directing steering cables on the deck of your kayak. Sold in a two-pack.
  • Patent Pending
  • 2 Pack
  • Made of stainless steel
  • Compatible with GearTrac, MightyMounts, and most other factory-installed track systems
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: AAP-1016
$16.95

YakAttack Torqeedo Throttle Mount

YAKATTACK TORQEEDO THROTTLE MOUNT WITH TRACK MOUNTED LOCKNLOAD MOUNTING SYSTEM (TQM-1001)

Featuring the LockNLoad mounting system this throttle mount is a great solution for attaching your Torqeedo throttle to YakAttack GearTrac, MightyMount II, MightyMount XL or most other factory-installed kayak track. The LockNLoad base gives you peace of mind offering an ultra secure install, but is also very easy to adjust on the water and attach or remove. Includes all necessary hardware. Patent pending. Torqeedo throttle not included. Compatible with YakAttack MightyMounts, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack and a six pack.

The LockNLoad track mount system is the most innovative mounting system on the market, and is exactly what you'd expect from the industry leaders in track mounting technology. There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use:

  • From locked mode, simply squeeze a lever to go into adjustment mode.
  • In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the accessory is completely secure while making adjustments. Let go of the lever and you are back in locked mode.
  • To go to removal mode, flip the lever out, and the system easily slides off of the track mount.
  • GearTrac and Torqueedo throttle not included
  • Made in the USA
  • Patent Pending
  • SKU: TQM-1001
$49.95

YakAttack Track Mounted Retractor

Secure your kayak fishing gear without bulky leashes or floats using the YakAttack Track Mount Retractor. This super versatile unit combines the innovation you've come to expect from YakAttack and genuine T-Reign retracting mechanism, 36" Kevlar cord, and a removable 4" tether. Designed for track mounting, this kit comes complete with everything you need.
GearTrac not included.


  • UV Resistant High Density Polyethylene
  • 36" Kevlar Cord
  • Removable 4" tether
$34.95

YakAttack Track Nut Kit, 6pk

1/4-20 track nut. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible.
  • Pack of 6 track nuts
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: TN-1420-6
$11.95

YakAttack Universal Mounting Plate

This product is a DIY mount and you will be required to drill holes to mount something like a Humminbird PiranhaMAX 4 to the mounting plate. Since every install will most likely be different no extra screws, nuts, or washers are included, and it is up to the user to find their own hardware for this install.

Mounting plate is 6" x 3.5"
$49.95

YakAttack Vertical Tie Downs Track Mount 2 pack

The YakAttack Track Mount Vertical Tie Downs come with a Mighty Bolt base. erfect as an anchoring point to secure a cooler or any other accessory to the track. Designed to work with 1'' and 1.5'' flat webbing and can also be used with bungee. Made in the USA from premium materials for a lifetime of use in even the harshest environments. Sold in a 2 pack.
$19.95

YakAttack VISICarbon Pro, MightyMount and GearTrac ready

Designed to meet the needs of all anglers- from serious kayak fishermen to recreational paddlers- the VISICarbon Pro™exhibits unprecedented performance in light weight, low drag, and portability- all with plenty of style. The ultra-thin mast and instantly recognizable flag combine to offer excellent performance with low wind resistance, and enhances your visibility on the water, night and day. The VISICarbon Pro™ light is complete with an LED module, which will burn for 100 hours on 3 AA batteries (included) and provides 360° visibility. The Silent Snap flag attachment provides a secure fastening that can be left for hours, or removed in seconds. The collapsed unit fits inside the flag for easy organization, creating a convenient and portable storage solution at only 14" long. The deployed VISICarbon Pro™ is 48" long. The SilentSlip foam at the base of the unit floats, but still fits into most flush mount and tubular rod holders. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems.

Enhances your visibility day or night.
SilentSlip foam fits most flush mount and tubular rod holders.
48" long deployed, 14" collapsed.
Collapsed unit stores inside flag.
It floats!
Designed with carbon fiber tubing for stiffness and ultra light weight.
Silent Snap flag attachment system provides quick and easy flag installation and removal.
LEDs burn 100 hours on 3 AA batteries (included).
10,000+ hours lamp life.
$94.95

YakAttack Zooka II Rod Holder with Track Mounted LockNLoad Mounting System

The Zooka II attaches to your kayak, boat, or other watercraft with YakAttack’s brand new LockNLoad mounting system, and is exactly what you would expect from the leader in track mounting technology. Offering unrivaled track mount security and adjustability, the patent pending LockNLoad track base is the most advanced track mount ever created. You want no slip? No problem. The LockNLoad track base attaches quickly and easily with a single MightyBolt, but will not accidentally rotate or loosen from the track, even when your trolling rod takes a big hit.

There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use:

- From locked mode, simply squeeze a lever to go into adjustment mode.

- In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you are back in locked mode.

- To go to removal mode, flip the lever out, and the system easily slides off of the track mount.
$41.95

Follow us on social media!