Thanks for registering your Slayer Propel Max!

Now that you have registered your kayak, let us help you create the best experience on the water

Accessories

Adapter Kit Slugs for Groove 1/4-20

The Groove Adapter Slugs Kit allows almost any gear to be mounted on the Versa Board Groove Kit mounting system

$9.00

Back Pack, Behind Seat

The First Class Seat Pack contours perfectly to the seat frame offering multiple easily accessible storage options. The front has two mesh pockets, the vertical zipper along the side makes it easy to get inside the main pocket without turning around, and the large back pocket is an excellent location for a hydration bladder or other items you want to keep on hand. SKU: APAC001 

$129.00

Bow Mount, Titans, Slayer Max 10/12.5, Slayer Propel 10

There are 3 accessory patterns that come pre-drilled (Micro Power Pole, Motorguide quick release bracket, and the Motorguide 6 bolt pattern). All stainless steel hardware is included to mount the plate to the kayak. This mount fits the Titans and the Slayer Propel Max 12.5. *Note: The install requires holes to be drilled into the kayak and does not void the Hull Warranty.

$129.00

Cam-Lok Paddle Holder Set Assembly

Cam-Lok Paddle Holders (1 set of two holders) are ingeniously designed to be versatile and easily re-positioned. They can be used in any Groove Track and allow you to keep your paddle lengthwise or across your boat. The internal rubber securely grips and cushions without scratching or generating noise. So easy to use, they make stowing and retrieving paddles practically effortless. Also great for holding rod ends!
$19.00

Captain's Bridge Accessory Mount Crossbar

Create the ultimate kayak fishing console with the Captain's Bridge. With dual mounting tracks on the top of the console as well as a track running down each side, their are many ways to mount you fish finders and other kayak fishing accessories.

1. Mounting width on the kayak: The Captain's Bridge will fit on a wide variety of fishing kayak models. For models with gear tracks on the port and starboard sides, it can slide right into the tracks. For models that do not have tracks but a flat surface, anglers can add YakAttack Mighty Mounts to attach the Captain's Bridge. You can measure the width of where you would like to place the Captain's Bridge. Here are the maximum mounting widths required:
    • The maximum mounting width of the 26" Captain's bridge is 25" 
    • The Maximum mounting width of the 32" Captain's bridge is 31"
      • Additional Note regarding the Titan X and PWR Mounting:  The 26" and the 32" will both fit on the Titan X in the bow mounting area and across the gunnel. If you are using a Pedal Drive you will want to mount in the bow area. For the PWR, both sizes will fit on the bow mounting area of the PWR and only the 32" will fit across the gunnel.
  • Tip: When going more towards the bow of the boat, the 26" might be better whereas mounting on the gunnels may be a better fit for the 32" due to the mounting width requirements stated above.

2. The screen size for your graphs: For example: If you are wanting to put dual monitors over 9" you may want to use the 32" to provide more space on the bar.

$139.99

Captain's Bridge Accessory Mount Crossbar

Create the ultimate kayak fishing console with the Captain's Bridge. With dual mounting tracks on the top of the console as well as a track running down each side, their are many ways to mount you fish finders and other kayak fishing accessories.

1. Mounting width on the kayak: The Captain's Bridge will fit on a wide variety of fishing kayak models. For models with gear tracks on the port and starboard sides, it can slide right into the tracks. For models that do not have tracks but a flat surface, anglers can add YakAttack Mighty Mounts to attach the Captain's Bridge. You can measure the width of where you would like to place the Captain's Bridge. Here are the maximum mounting widths required:
    • The maximum mounting width of the 26" Captain's bridge is 25" 
    • The Maximum mounting width of the 32" Captain's bridge is 31"
      • Additional Note regarding the Titan X and PWR Mounting:  The 26" and the 32" will both fit on the Titan X in the bow mounting area and across the gunnel. If you are using a Pedal Drive you will want to mount in the bow area. For the PWR, both sizes will fit on the bow mounting area of the PWR and only the 32" will fit across the gunnel.
  • Tip: When going more towards the bow of the boat, the 26" might be better whereas mounting on the gunnels may be a better fit for the 32" due to the mounting width requirements stated above.

2. The screen size for your graphs: For example: If you are wanting to put dual monitors over 9" you may want to use the 32" to provide more space on the bar.

$139.99

Dakota Lithium 12V 23Ah USB Battery

Dakota Lithium has optimized this charger for use with our lithium iron phosphate batteries (LiFePO4). All 12 volt Dakota Lithium batteries should be charged using a LiFePO4 compatible charger like this one. SLA chargers will reduce the performance and lifespan of the battery. This charger charges at a speed of 3 amps an hour and is optimal for batteries < 25Ah. For batteries greater than 25Ah like the 54Ah or 100Ah battery we recommend the 10 amp charger.

$199.00

Dakota Lithium 12V 23Ah USB Battery

Dakota Lithium has optimized this charger for use with our lithium iron phosphate batteries (LiFePO4). All 12 volt Dakota Lithium batteries should be charged using a LiFePO4 compatible charger like this one. SLA chargers will reduce the performance and lifespan of the battery. This charger charges at a speed of 3 amps an hour and is optimal for batteries < 25Ah. For batteries greater than 25Ah like the 54Ah or 100Ah battery we recommend the 10 amp charger.

$199.00

FRABILL - Bearclaw Kayak Fishing Net

Kayakers, paddle boarders and anyone fishing with one hand free can now achieve powerful catches with the Trophy Haul™ Bearclaw Night. Simply wrap the support bar around the forearm and grab the handle right at the yoke for easy one-handed operation. The conservation netting and asymmetrical design protect fish as they smoothly slide into the flat bottom.

  • HANDLE LENGTH: 18"
  • HANDLE TYPE: BEARCLAW
  • HOOP SHAPE: MESHGUARD™
  • HOOP SIZE: 14" X 18"
  • SIMPLE HANDLE TYPE: FIXED
  • SIMPLE NETTING TYPE: COATED
  • YOKE: TROPHY HAUL
$99.99

FRABILL - Bearclaw Kayak Fishing Net

Kayakers, paddle boarders and anyone fishing with one hand free can now achieve powerful catches with the Trophy Haul™ Bearclaw Night. Simply wrap the support bar around the forearm and grab the handle right at the yoke for easy one-handed operation. The conservation netting and asymmetrical design protect fish as they smoothly slide into the flat bottom.

  • HANDLE LENGTH: 18"
  • HANDLE TYPE: BEARCLAW
  • HOOP SHAPE: MESHGUARD™
  • HOOP SIZE: 14" X 18"
  • SIMPLE HANDLE TYPE: FIXED
  • SIMPLE NETTING TYPE: COATED
  • YOKE: TROPHY HAUL
$99.99

Hi-Performance Rudder Blade Kit, 14" w/ 5" post, Slayer MAX

Comes with X-cut foam rudder seal and rudder bolt.
$39.99

Ketch ID

This product will fit Ketch X, Karbonate, and board & cradle (All sizes)
Slides on your Ketch board for easy maneuvering
Adjustable to fight against sunlight
Comes with ID Card holder
Note: Before applying dual loc to clear ID Holder, clean surface for better adhesion
$29.99

Ketch Keeper

Mount your Ketch Board anywhere
Fits all Ketch Boards
Standard Kit comes with 10-32 3/8” bolts 10-32 t-nuts for t-track X2 each per package.
Krate Kit comes with 10-32 x 1” Nylon lock nuts Washers X4 of each per package.
Stainless Steel Hardware
$26.99

Kit ProPel Lubrication

To keep your Propel Pedal Drive (patent pending) operating in peak condition, you should keep it clean and periodically add lubricant to the crank. This kit includes the tools and lubricant used in the general maintenance needed to ensure optimal performance for the lifetime of your Propel system(patent pending).
- Includes 3.5 oz. of Teflon lubricant, pump with extended nozzle and 3/16" allen key to access fill port
SKU: AKIT001
$49.00

Kit Replacement Propeller Bullnose 2019

Easy Cruz Replacement Propeller - Bullnose
SKU: APRO002
$29.00

Latch kit, Finger Loop Pull Sliders Only 2021- Set of 3

Set of 3 Propel Pedal Drive thwart locking latches, finger loop pull style.  Bases and hardware not included. 




$12.99

Native Kayak Kushion

-Light weight patented technology for more enjoyment

- High quality grade sewing

-Tactical straps with anti slip cam buckles

-Breathable material

-Zipper accessibility

-Non-collapsible & functional

$64.99

Native Kayak Kushion

-Light weight patented technology for more enjoyment

- High quality grade sewing

-Tactical straps with anti slip cam buckles

-Breathable material

-Zipper accessibility

-Non-collapsible & functional

$64.99

Native Watercraft Karbonate Board

The Ketch Karbonate Measuring Board comes in a high-visibility yellow color that is easy to read and extremely durable. The polycarbonate material of the Karbonate Measuring Board is built to last and comes with a built-in cradle to keep your catch steady and protected so you can quickly make accurate measurements on the water
  • Native Watercraft Branded
  • Available in 26" and 32" sizes
  • KBF Approved
  • High color yellow that’s easy to read and extremely durable.
  • Built in Cradle
  • Compatible with floating kit (coming soon!)
$43.99

Native Watercraft Kayak Covers

Native Watercraft kayak covers are custom made to fit our kayaks just right. Each cover includes a full set of cover tie down straps (one for each loop set) that can be used to secure the cover when traveling through the sewn in loops on the cover. All covers are made in USA and created with marine-grade anti-wick thread that includes double-stitched construction and 4-ply join seams.
$184.99

Native Watercraft Kayak Covers

Native Watercraft kayak covers are custom made to fit our kayaks just right. Each cover includes a full set of cover tie down straps (one for each loop set) that can be used to secure the cover when traveling through the sewn in loops on the cover. All covers are made in USA and created with marine-grade anti-wick thread that includes double-stitched construction and 4-ply join seams.
$184.99

Native Watercraft Ketch X Board

Native Watercraft Branded
Tether holes CNC machined on fence end of the board.
High color contrast that’s easy to read and extremely durable.
Tournament numbers on top of Kradle edge
Ketch Kradle incorporated into board (all one piece)
Widened fence

$69.99

Native Watercraft Ketch X Board

Native Watercraft Branded
Tether holes CNC machined on fence end of the board.
High color contrast that’s easy to read and extremely durable.
Tournament numbers on top of Kradle edge
Ketch Kradle incorporated into board (all one piece)
Widened fence

$69.99

NRS Chinook Fishing PFD

The evolution of NRS Chinook Fishing PFD, our best-selling life jacket, depends on our designers listening to the reviews of anglers around the world. And we do. With reconfigured pocket designs, the Chinook makes catching the adventure safer and more effective on the water.

 

  • The Chinook is a Type III, medium profile life jacket delivering 16.5 pounds of flotation.
  • Zippered front entry for quick donning and six adjustment points for a customized fit.
  • PlushFit™ foam and a high-back design combine to create an extremely comfortable vest for any type of raft or kayak seat.
  • A mesh lower-back offers added ventilation on warm days.
  • Two large clamshell pockets, sized for tackle boxes, feature updated internal organization based on angler reviews.
  • A single, exterior pocket on the angler's right side offers easily accessible storage.
  • A fifth, tool holder pocket offers quick access to pliers, line cutters or other fishing gadgets and secures with a hook-and-loop fastener.
  • Also features a rod holder, strobe attachment point, reflective accents and knife lash tab.
$119.95

NRS Chinook Fishing PFD

The evolution of NRS Chinook Fishing PFD, our best-selling life jacket, depends on our designers listening to the reviews of anglers around the world. And we do. With reconfigured pocket designs, the Chinook makes catching the adventure safer and more effective on the water.

 

  • The Chinook is a Type III, medium profile life jacket delivering 16.5 pounds of flotation.
  • Zippered front entry for quick donning and six adjustment points for a customized fit.
  • PlushFit™ foam and a high-back design combine to create an extremely comfortable vest for any type of raft or kayak seat.
  • A mesh lower-back offers added ventilation on warm days.
  • Two large clamshell pockets, sized for tackle boxes, feature updated internal organization based on angler reviews.
  • A single, exterior pocket on the angler's right side offers easily accessible storage.
  • A fifth, tool holder pocket offers quick access to pliers, line cutters or other fishing gadgets and secures with a hook-and-loop fastener.
  • Also features a rod holder, strobe attachment point, reflective accents and knife lash tab.
$119.95

Pedal Upgrade Kit

This black pedal is included on all 701 series Propel Pedal Drive units and retrofittable to all 301 series or newer Propel Pedal Drive Units. We have included two NEW colors for 2023 as accessories! Check them out!
$39.99

PLANO - Edge Professional STD Box

Not just advancing tackle storage, but pushing it to the EDGE, the Plano EDGE Professional STD is the greatest tackle storage solution to ever hit the market. Better in every possible way, the Plano EDGE Professional STD features Rustrictor rust preventative technology molded into the base and a Dri-Loc watertight seal that keeps your tackle in pristine condition. It also features a crystal clear lid design for quick identification of contents and an oversized latch that allows for easy one-handed open operation.

To take things a step further, the Plano EDGE Professional STD features pre-cut vented and water-absorbing desiccant dividers, which allows anglers to create 4-32 unique storage compartments for various types of tackle. Finished with heavy-duty steel pin hinges for increased durability, the Plano EDGE Professional STD sets the new standard for tackle management. 

$23.99

PLANO - Edge Professional STD Box

Not just advancing tackle storage, but pushing it to the EDGE, the Plano EDGE Professional STD is the greatest tackle storage solution to ever hit the market. Better in every possible way, the Plano EDGE Professional STD features Rustrictor rust preventative technology molded into the base and a Dri-Loc watertight seal that keeps your tackle in pristine condition. It also features a crystal clear lid design for quick identification of contents and an oversized latch that allows for easy one-handed open operation.

To take things a step further, the Plano EDGE Professional STD features pre-cut vented and water-absorbing desiccant dividers, which allows anglers to create 4-32 unique storage compartments for various types of tackle. Finished with heavy-duty steel pin hinges for increased durability, the Plano EDGE Professional STD sets the new standard for tackle management. 

$23.99

Power-Pole Micro Anchor w/ 8 Ft UL Spike

Power-Pole Micro Spike Driver can hold Jon boats and small skiffs up to 1,500 lbs (including passengers) and is perfect for kayaks and paddle boards. Micro anchor unit is easily-removable making storage or transfer to other vessels simple. Includes quick-release bracket. Other mounting options available including custom mounting brackets or transom mount adapters. Includes 15 ft power cord for 12v battery or if no on-board battery is available, add the Micro Battery Pak & Charger (sold separately) and go wherever adventure takes you. Micro driver unit accommodates any 3/4" spike, including the Power-Pole Ultra-lite 8' Spike.

    Features:
  • Lightweight, compact design
  • Virtually silent operation
  • streamlined user interface
    Includes:
  • Adjustable Quick-release Bracket
  • 2-button Key Fob Remote
  • Advanced Dash Switch
  • 15' Power Cord
  • 8' Ultra-lite Spike
$699.00

Power-Pole Micro Anchor w/ 8 Ft UL Spike

Power-Pole Micro Spike Driver can hold Jon boats and small skiffs up to 1,500 lbs (including passengers) and is perfect for kayaks and paddle boards. Micro anchor unit is easily-removable making storage or transfer to other vessels simple. Includes quick-release bracket. Other mounting options available including custom mounting brackets or transom mount adapters. Includes 15 ft power cord for 12v battery or if no on-board battery is available, add the Micro Battery Pak & Charger (sold separately) and go wherever adventure takes you. Micro driver unit accommodates any 3/4" spike, including the Power-Pole Ultra-lite 8' Spike.

    Features:
  • Lightweight, compact design
  • Virtually silent operation
  • streamlined user interface
    Includes:
  • Adjustable Quick-release Bracket
  • 2-button Key Fob Remote
  • Advanced Dash Switch
  • 15' Power Cord
  • 8' Ultra-lite Spike
$699.00

Railmount Storage, 3 pocket Toolholder 2018

Hand-sewn in Fletcher, NC USA. Provides three slots for tool storage (tools not included). Attaches to Groove Tracks with included hardware.
- Mounts to groove tracks on select Native kayak models.
- Includes hand-sewn tool holder, two thumb screws, and two slider slugs
SKU: ASTO020
$29.99

Rudder Cable Replacement Kit, Propel Models

Replacement rudder cable for Propel kayak models. Includes cable and two crimps.
SKU: ACAB001
$19.99

Seat Back Tackle Box Storage

Attaches to Native Watercraft frame seats for added tackle storage. Fits onto back of all current Native Watercraft model seats except Manta Ray Angler 12s.
SKU: ASTO015
$69.00

Seat Tool and Tackle Organizer

Hand-sewn in Fletcher, NC USA. Provides four slots for tool storage (tools not included). Has two pockets for plano boxes (boxes not included). Contains d rings for tethering tools. Provides easy to access in high or low seat positions. Attaches to the bottom of the seat frame with hook and loop strips. Does not fit on Titan and Ultimate FX Propel seating.
SKU: ASTO005
$79.00

Sidekick Rod Butt Lay


Rod butt lay sets for use with Sidekick set ups. Please choose a single or double recess.

Double Overmount pictured.




SKU: ABUT004, ABUT005


$29.99

Tournament Rail Tool and Tackle Caddy

Looking for quick access to tools and tackle? This pouch attaches using the Groove Track system and overhangs into the kayak for easy access. Fits the Slayer Propel 10, Slayer Propel 13, Manta Ray Propel Angler 12, Slayer 12, Slayer 14. 5 models. Tools and tackle box not included.
SKU: ASTO012
$59.00

Trolley Anchor System

The Anchor Trolley allows anglers to change the direction they are fishing just by sliding the trolley up or down the length of their boat instead of by moving their anchor. You can control the pulleys while seated to fish 360 degrees around every great fishing spot.
SKU: AATR112
$39.00

Upper Transmission Rebuild Kit

Includes Upper Gear Assembly, Bearings, Upper Transmission Gear. Increases the efficiency and performance of well-used drives.
SKU: APRO005
$165.00

Welding Rods - Pack of 6

Pack of 6 welding rods
$9.99

YakAttack AR Tube Rod Holder with Track Mounted LockNLoad Mounting System

The YakAttack Advanced Rod Tube™ is our take on the classic tube-style rod holder designed for spinning and casting rods and reels. It features a gimbal lock that flips into place to accommodate longer rods as well as multiple attachment points on the bottom side for rod leashes, increasing gear security. Made from marine grade polymers the AR Tube is built to last and comes with our Built for Life Guarantee. The AR Rod Tube is track-mount ready, and features the LockNLoad™ Mounting System. The LockNLoad system offers unrivaled track-mount security, but its also incredibly easy to adjust. GearTrac not included

There are 3 modes: locked, adjustment, and removal.

- From locked mode, simply squeeze a lever to go into adjustment mode.

- In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you are back in locked mode.

- To go to removal mode, flip the lever out, and the system easily slides off of the track mount.

$41.95

YakAttack BlackPak Pro Kayak Fishing Crate - 13 x 13

Product Information

Description

The original hard-sided kayak crate just got better. A lot better. Introducing the completely redesigned BlackPak Pro.  

The result of intense collaboration and more than a year of R&D and design, the BlackPak Pro is fully riggable and boasts a hinged lid, 25% weight reduction, and best-in-class functionality. Enhancements include many things you might have expected, as well as some true-to-the-brand features that no one saw coming.

Size

The BLP-PRO-13X13 is 13” x 13” x 13” (L,W,H) and weights in at 6.9 lbs. without TetherTubes and 8.2 lbs. with the included three TetherTubes . The BlackPak Pro also comes in two other sizes, 13” x 16” and a 16” x 16”.

Construction and Assembly

Injection-molded from UV stabilized polymers, the BlackPak Pro will last for many years, even in harsh marine environments. The ultra-stiff panels utilize a rib structure that offers exceptional rigidity with minimal weight, while their interlocking joints ensure an intuitive, frustration-free assembly process. Interlocking GridLoc panels utilize a tongue and groove edge design to make assembly a breeze. Just press them together (they won’t fall apart during assembly) and install the (included) stainless steel screws using a simple screwdriver.

Hinged Lid

The water shedding lid with fully adjustable hinges allows you to go from freely pivoting to a sticky setting that maintains the lid position when you let go of it, while integrated overtravel stops keep the lid within reach and limit it to a manageable angle. Sound dampening rubber bumpers ensure quiet closing of the lid, and the unique CatchLatch retention system secures the lid in a simple but surprisingly functional manner. 

Rod Holders

The included three TetherTube rod holders with integrated but easily removable hook and tether systems ensure your rods stay put if things go wrong. Caged attachment points on both sides of the tube offer multiple hook points, and the oversized hook design is sized to attach directly to the shaft of your fishing rod if desired. The TetherTube rod holder mounts to the GridLoc panels using at least three of the four standoff pads, enabling several vertical positioning options. Mount them high for rods with long butts, or mount them low to elevate the BlackPak Pro into the HighNDry position.

Tankwell Security

Rubber feet offer noise dampening and isolation, while Omni corner brackets enable multiple hold-down methods. They are designed as attachment points for YakAttack OmniHooks (four of which are included), generic hooks, carabiners, or simple bungee. 

Storage

Optimized for a wide variety of tackle boxes, including Plano 3700, Plano Edge, Bass Mafia Bait Coffin, Flambeau, and many more. 

Rigability

The key to customizing and accessorizing the BlackPak Pro lies in the highly revolutionary GridLoc 2D mounting system, which offers a plethora of attachment points on the inside and outside of the panels. This gives our design team a platform for which they can design a myriad of dividers, holders, and other attachments. Development of these accessories is already underway!

Features:

  • 3 Rod Holders with built-in rod leashes
  • Optimized for 3600 sized tackle boxes
  • Fits eight 3600 Plano boxes
  • Hinged lid with secure latches
  • New lightweight construction
  • GridLoc Mounting Platform located on every panel
  • Rubberized feet and built in noise dampening features
  • Internal dimensions (L, W, H) – 11.9” x 11.9”  x 11.75”
  • External dimensions (L, W, H)  – 12.94” x 12.94”  x 13.3”
  • 6.9 lbs. without TetherTubes and 8.2 lbs. with included three TetherTubes
  • When measuring your kayak's tankwell add 2.75" for every side you intend to attach TetherTubes
  • Build for use in harsh marine conditions
  • Includes stainless steel hardware
  • Made in the USA
  • Built for Life Guarantee
  • SKU: BLP-PRO-13X13
$124.95

YakAttack BlackPak Pro Kayak Fishing Crate - 16 x 16

The original hard-sided kayak crate just got better. A lot better. Introducing the completely redesigned BlackPak Pro. 

The result of intense collaboration and more than a year of R&D and design, the BlackPak Pro is fully riggable and boasts a hinged lid, 25% weight reduction, and best-in-class functionality. Enhancements include many things you might have expected, as well as some true-to-the-brand features that no one saw coming.

Size

The BLP-PRO-16X16 is 16” x 16” x 13” (L,W,H) and weighs in at 9.1 lbs. without TetherTubes and 11.5 lbs. with the included six TetherTubes. The BlackPak Pro also comes in two other sizes, 13” x 13” and a 13” x 16”.

Construction and Assembly

Injection-molded from UV stabilized polymers, the BlackPak Pro will last for many years, even in harsh marine environments. The ultra-stiff panels utilize a rib structure that offers exceptional rigidity with minimal weight, while their interlocking joints ensure an intuitive, frustration-free assembly process. Interlocking GridLoc panels utilize a tongue and groove edge design to make assembly a breeze. Just press them together (they won’t fall apart during assembly) and install the (included) stainless steel screws using a simple screwdriver.

Hinged Lid

The water shedding lid with fully adjustable hinges allows you to go from freely pivoting to a sticky setting that maintains the lid position when you let go of it, while integrated overtravel stops keep the lid within reach and limit it to a manageable angle. Sound dampening rubber bumpers ensure quiet closing of the lid, and the unique CatchLatch retention system secures the lid in a simple but surprisingly functional manner. 

Rod Holders

The included six TetherTube rod holders with integrated but easily removable hook and tether systems ensure your rods stay put if things go wrong. Caged attachment points on both sides of the tube offer multiple hook points, and the oversized hook design is sized to attach directly to the shaft of your fishing rod if desired. The TetherTube rod holder mounts to the GridLoc panels using at least three of the four standoff pads, enabling several vertical positioning options. Mount them high for rods with long butts, or mount them low to elevate the BlackPak Pro into the HighNDry position. Additional TetherTubes are available for purchase as single and two packs.  

Tankwell Security

Rubber feet offer noise dampening and isolation, while Omni corner brackets enable multiple hold-down methods. They are designed as attachment points for YakAttack OmniHooks (four of which are included), generic hooks, carabiners, or simple bungee. 

Storage

Optimized for a wide variety of tackle boxes, including Plano 3700, Plano Edge, Bass Mafia Bait Coffin, Flambeau, and many more. 

Rigability

The key to customizing and accessorizing the BlackPak Pro lies in the highly revolutionary GridLoc 2D mounting system, which offers a plethora of attachment points on the inside and outside of the panels. This gives our design team a platform for which they can design a myriad of dividers, holders, and other attachments. Development of these accessories is already underway!

Features:

  • 6 Rod Holders with built-in rod leashes
  • Optimized for 3700 sized tackle boxes
  • Holds seven 3700 boxes with extra room on top for more
  • Hinged lid with secure latches
  • New lightweight construction
  • GridLoc Mounting Platform located on every panel
  • Rubberized feet and built in noise dampening features
  • Internal dimensions (L, W, H) – 14.9” x 14.9”  x 11.75”
  • External dimensions (L, W, H)  – 15.94” x 15.94”  x 13.3”
  • When measuring your kayak's tankwell add 2.75" for every side you intend to attach TetherTubes
  • 9.1 lbs. without TetherTubes and 11.5 lbs. with the included six TetherTubes
  • Build for use in harsh marine conditions
  • Includes stainless steel hardware
  • Made in the USA
  • Built for Life Guarantee
  • SKU: BLP-PRO-16X16
$174.95

YakAttack Cam Straps 12 Feet 2 Pack

The YakAttack Cam Straps are an essential for any kayak angler. The high-quality polyester webbing has a higher break strength, superior resistance to abrasion, less stretch, better UV resistance, and increased water resistance compared to common polypropylene straps sold by most companies. The custom rubber buckle cover helps prevent dents and scratches while car topping.

  • Sold in a 2 pack
  • 12 ft. long
  • 1 inch wide webbing
  • Made with high-quality polyester webbing
  • Custom rubber buckle cover
  • Buckle and webbing are made in China
  • Buckle cover and sewing are done in the USA
  • SKU: YEP-1006-12
$22.95

YakAttack CatchNRelease Drip Rings

YakAttack CatchNRelease Drip Ring - Pair (YEP-1001)

This deep dish CatchNRelease Drip Ring features a unique design which catches water coming off the paddle blade in the high position, and releases it back into the water during your downstroke. We think this is the driest drip ring on the market. Soft and supple, the CatchNRelease Drip Ring is designed to fit all common sized paddle shafts including Werner, Bending Branches, and other popular brands of kayak paddles.

  • Sold in a two pack
  • Fits standard diameter kayak paddles
  • Made in the USA
  • SKU: YEP-1001
$9.95

YakAttack CellBlok

Depthfinder installation on kayaks just got smarter. The YakAttack CellBlok is a track mounted battery box and its top surface serves as a mounting platform for the display and transducer deployment arm. No more drilling holes in your kayak or routing wires! Simply loosen the two track mount knobs and the CellBlok allows you to quickly and easily attach or remove your depthfinder. A minimum of 10.5" of track is required to attach the CellBlok. The YakAttack SwitchBlade Transducer Deployment Arm and our line of fish finder mounts pair perfectly with the CellBlok to create a complete fish finder mounting solution.

Interior Space - 6.375'' x 4.25'' x 2.60''

Exterior Dimensions - 10.25'' x 6.75'' x 3.50''

CellBlok box only with hardware to attach to GearTrac.
$64.95

YakAttack Complete LockNLoad Track Base

YakAttack’s LockNLoad™ mounting system, is exactly what you would expect from the leader in track mounting technology. Offering unrivaled track mount security and adjustability, the patent pending LockNLoad™ track base is the most advanced track mount ever created. You want no slip? No problem. The LockNLoad track base attaches quickly and easily with a single MightyBolt™, but will not accidentally rotate or loosen from the track, even when your trolling rod takes a big hit. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6).

  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: LNL-1001
$19.95

YakAttack DoubleHeader Track Mount

In typical YakAttack fashion, they started as an idea for a single offset RotoGrip Paddle Holder resulted in a product with a bit more versatility. The end result of the DoubleHeader Track Mount was a unique addition to the YakAttack product line that allows the ability to attach various accessories using a single attachment point. If you already own two RotoGrip Paddle Holders, then simply remove the rubber washer included with your paddle holders, insert the MightyBolt through the underside of the DoubleHeader, and tighten the body of the RotoGrip. The DoubleHeader in that configuration provides the perfect offset paddle holder solution moving your paddle off the side of your kayak, freeing up track space. Let’s say you want to add dual Omega Rod Holders for crappie fishing. The mounting holes at the end of the DoubleHeader are LockNLoad compatible and allow for easy attachment of LockNLoad accessories like the Omega or Omega Pro. Looking to maximize the number of rods on your kayak for tournament day? The DoubleHeader Track Mount serves as the perfect mounting system for dual AR Tube Rod Holders.  

If you are tight on track space, the DoubleHeader includes an additional feature to add LockNLoad accessories like YakAttack rod holders, camera mounts, and more. Simply replace the stock knob and MightyBolt from the DoubleHeader with the LockNLoad base of a rod holder or other accessories, and you are able to have multiple attachments on a short section of track or a single point of attachment like a MightyMount II. The DoubleHeader track mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory-installed kayak track.

Included with the DoubleHeader are two different Track Disk. These two Track Disks are designed to provide a snug fit in either the standard YakAttack GearTrac (GT90, GTSL90, GT175, MightyMount XL) or the wider opening of the YakAttack Top Loading family of GearTrac (GTTL90 and GTTL175). If a track system came included with your kayak, try both of them and determine which one will provide the best fit.

The DoubleHeader Track Mount is made in the USA from marine grade polymers and is backed by our Built for Life Guarantee.

  • Made in the USA
  • Built for Life Guarantee
  • Single point of attachment
  • LockNLoad Compatible
  • Includes two sizes of Track Disks
  • DoubleHeader is 8.25” wide
  • The DoubleHeader Track Mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory installed kayak track.
$19.95

YakAttack GearTrac Hardware Kit

Includes four of each: Convertible Knobs, 1-1/2'' MightyBolts, Track Nuts, 1-1/4'' Socket Head Cap Screws. All standard 1/4-20 thread. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6).
  • 4 Stainless Steel MightyBolts
  • 4 Convertible Knobs
  • 4 Track Nuts
  • 4 Socket Head Cap Screws
  • All Standard 1/4-20 Thread
  • Patent Pending
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: HRC-1004
$24.95

YakAttack GT Cleat XL

The larger and heavier-duty version to our original GT Cleat, the GT Cleat XL™ is our simple and highly effective answer to the issue of line management. It attaches to all YakAttack® GearTrac™, MightyMount XL tracks, and most other kayak track systems. The GT Cleat XL makes for a perfect companion to our highly popular LeverLoc™ Anchor Trolley and is a low profile, easy to attach and adjust anchor line cleat. The underside of the cleat features two tabs and a rubber washer helping keep the cleat from rotating and sliding in the track from anchor line tension.  Best used with 1/2" rope.

  • Compatible with YakAttack GearTrac, MightyMount, and most other factory-installed kayak track systems
  • Best used with 1/2" rope
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: MTA-1004
$19.95

YakAttack HD Mount LockNLoad

YakAttack’s LockNLoad™ mounting system is exactly what you would expect from the leader in track mounting technology. Now, enjoy the versatility and ingenuity of the LockNLoad System in heavy duty applications such as trolling for big game. Due to the two MightyBolt attachment points, the HD Track Mount gives you more gear security than ever before! No track? No problem! You can easily remove the two MightyBolts and use hardware to quickly deck mount your YakAttack rod holder or fish finder, as well as using holes from old-school deck mounts to mount the HD Track Mount crossways. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack and a six pack.

 

  • Two MightyBolt attachment points gives you better gear security
  • Not for use with under 8" of track
  • For Heavy Duty applications
  • Can be used for deck mounting
  • Utilizes pre-drilled holes from old-school deck mounts to be mounted crossways
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: LNL-1006
$19.95

YakAttack Horizontal Tie Downs

This track mounted tie-down allows a quick and easy attachment point for webbing, small ropes, and bungee in configurations in which the Vertical Tie Down is not ideal. Perfect for securing Blackpaks™, other crate systems, and large gear bags in a kayak tankwell. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack and a six pack.

  • Sold in 2 pack
  • Attaches to YakAttack® GearTrac™, MightyMounts, and most other factory installed kayak track
  • Use with 1"-1.5" webbing straps or bungee
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: AAP-1027

$19.95

YakAttack Leverage Landing Net, 20 Inch x 21 Inch Hoop with Foam Extension

The revolutionary forearm grip featured on the Leverage Landing Net offers unparalleled stability and control, while the hinged design allows the handle to fold alongside the net for compact and easy stowage which make the Leverage Landing Net the best net when kayak fishing. The high level of control and accuracy offered by the forearm grip means you don't need a giant hoop to net your next big fish and makes the Leverage Landing Net an essential piece of kayak fishing gear. This model of the Leverage Landing Net features a foam covered extension on the handle allowing for the net to be stored in a tube style or flush mount rod holder. 
  • Revolutionary Forearm Grip
  • Folds for Easy Storage
  • Full Rubber Net
  • Extended Foam Covered Handle
  • Wider, more traditionally designed hoop
  • 20" X 21" Hoop
  • 54" overall length

Leverage Landing Net is a registered trademark of YakAttack, LLC

  • Netting is molded in Taiwan
  • All other components are made and assembled in the USA
  • Covered by our Built for Life Guarantee
$89.95

YakAttack LeverLoc Anchor Trolley HD

The first anchor trolley designed specifically for the job, the YakAttack LeverLoc™ Anchor Trolley features a LeverLoc™ line clamp, which locks your trolley line in place with a simple “flip of a switch” motion. Keeping the trolley lines in line is the PadHook, a simple but clever design that combines the functionality of both a pad-eye and a hook, keeping even the tightest trolley lines in place on the side of the kayak, not over your gunwale. When not in use, the easy-knot trolley ring snaps into the base of the LeverLoc™, quietly secured until deployed. Includes 35’ of USA made 550 paracord with a highly reflective tracer. This model features the HD option, which gets you two extra PadHooks plus backing plates for the pulleys and LeverLoc™, enabling a heavy duty install when compared to the self-threading screws included in the standard kit. Features YakAttack Stealth Pulleys for super smooth operation. The use of a YakAttack Rigging Bullet, RB1032, is highly recommend for installs where the install location is out of arms reach.

  • Easy installation
  • New YakAttack Stealth Pulleys
  • 35' of highly reflective USA-made 550 paracord
  • Includes all necessary hardware for installation
  • Heavy duty
  • Includes backing plates and extra Padhooks not included in AMS-1003.
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: AMS-1004
$44.95

YakAttack Lowrance Hook2 Fish Finder Mount with Track Mounted LockNLoad Mounting

Designed to replace the factory base on Lowrance Hook2 4 and 5, Reveal 5, and Simrad Cruise 5. This Lowrance Fishfinder Mount is a simple, clean, and a highly effective solution. This mount improves on the original included mount enabling fast and easy one-handed display adjustment. Includes the LockNLoad Mounting System for maximum versatility and rigidity. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6).

  • GearTrac not included
  • Fishfinder not included
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • Patent Pending
  • SKU: FFP-1006
$49.95

YakAttack MightyMount II with FullBack plate

The MightyMount II is a low profile, highly versatile mount with a small footprint and the same hole pattern as the original MightyMount. Used for attaching accessories requiring a single t-bolt attachment point or YakAttack products that feature the LockNLoad™ mounting system like rod holders, fish finders, and more.

Mighty Mount II is 2"x2.375"x.5"
Contains all necessary hardware
$16.95

YakAttack Omega Pro Rod Holder

The YakAttack Omega Pro series rod holders are the last rod holder you’ll ever need. 

The Omega Pro adds an extension arm to help get your reel higher off the water or helps accommodate longer rod butts.

The Omega Pro Rod Holder is a truly universal solution that works flawlessly with spinning, casting, larger conventional reels, and yes – even fly rods of all sizes. A 360 degree rotating collar offers the ability to quickly secure the rod by capturing the reel, and allows spinning reels to be stowed in the natural downward position, not hung off the side. Multiple modes allow anglers to easily stage rods for quick access or lock them in for maximum security. 

The Omega Pro Rod Holder attaches to your kayak, boat, or other watercraft with YakAttack’s LockNLoad mounting system, and is exactly what you would expect from the leader in track mounting technology. 

Offering unrivaled track mount security and adjustability, the patent pending LockNLoad track base is the most advanced track mount ever created. You want no slip? No problem. The LockNLoad track base attaches quickly and easily with a single MightyBolt, but will not accidentally rotate or loosen from the track, even when your trolling rod takes a big hit. 

Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. 

There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use: 
- From locked mode, simply squeeze a lever to go into adjustment mode. 
- In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you back in locked mode. 
- To go to removal mode, flip the lever out, and the system easily slides off of the track mount. 

  • Gear Trac not included
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • Patent Pending
$39.95

YakAttack PanFish Portrait Pro Camera Mount

The LockNLoad™ track mount system is the most innovative mounting system on the market, and is exactly what you'd expect from the industry leaders in track mounting technology. There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use:
- From locked mode, simply squeeze a lever to go into adjustment mode.
- In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you back in locked mode.
- To go to removal mode, flip the lever out, and the system easily slides off of the track mount.

The ultra-durable construction of the PanFish Portrait Pro™ is not only super lightweight - it's also incredibly rigid, reducing shake in your camera footage.

Utilizes the LockNLoad™ Track Mount System for easy on and off, angled articulation, and rotational pivoting
Durable, lightweight, and super rigid construction
Features the new YakAttack Camera Ball
For use with camera utilizing a 1/4-20 mount or GoPro Cameras
11.5" Tall
$59.95

YakAttack PanFish Pro Camera Mount

The LockNLoad™ track mount system is the most innovative mounting system on the market, and is exactly what you'd expect from the industry leaders in track mounting technology. There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use:
- From locked mode, simply squeeze a lever to go into adjustment mode.
- In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you back in locked mode.
- To go to removal mode, flip the lever out, and the system easily slides off of the track mount.



The ultra-durable aluminum construction of the PanFish Pro™ is not only super lightweight - it's also incredibly rigid, reducing shake in your camera footage.In addition, the patented design allows for one-hand rotation without loosening or tightening the product, giving you the ability to get the smoothest pan shot.

Utilizes the LockNLoad™ Track Mount System for easy on and off, angled articulation, and rotational pivoting
Durable, lightweight, and super rigid aluminum construction
Features the new YakAttack Camera Ball
It floats!
For use with camera utilizing a 1/4-20 mount or GoPro Cameras
33" Tall
$99.95

YakAttack ParkNPole 7'8"

The YakAttack ParkNPole 7'8" is the updated version of our ParkNPole 8' that better complies with UPS shipping restrictions.
 
Used as a stakeout/push pole for kayaking, this product has many great features including a floating base, a fiberglass body, and a foot and tip that are UV stable and made of wear-resistant nylon. Lightweight and incredibly durable, this product makes the perfect companion for fishing in shallow waters.
  • Foot for paddling
  • Tip for staking into the ground
  • 7' 8" long
  • .845'' Diameter Tubing
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: PNP78
$99.95

YakAttack ParkNPole Link 8'

The ParkNPole Link™ is a smarter, two-piece version of the popular 8' ParkNPole™. The two-piece construction makes transportation easy to and from the water or makes it possible to store inside the hull of your fishing kayak. For a longer option purchase the 46'' extension making the total length 12'. At 12 feet, the ParkNPole Link™ plus the extension, make for a great push pole and also helps when anchoring in deeper water. Made from specially formed fiberglass and UV stabilized, wear resistant nylon. At 1.8 lbs, it is incredibly lightweight and extremely durable.

  • 8' long
  • .845'' Diameter Tubing 
  • Purchase the 46" extension for an extended length of 12'
  • Wear-resistant nylon tip and foot with a fiberglass body
  • Weights only 1.8 lbs, yet is extremely durable.
  • The two-piece construction allows for easy transportation and storage.
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: PNPL-8
$129.95

YakAttack ParkNPole RotoGrip

Since launching the YakAttack ParkNPole a number of years ago customers have been requesting a track mounted solution to secure their stakeout pole. This product is compatible with every length of YakAttack ParkNPole including the 6', 7' 8", and 8' Link. Using our popular RotoGrip platform, larger wheels were designed to perfectly secure the 0.84” ParkNPole diameter tubing. Super low profile at 2.4" tall, the ParkNPole RotoGrip secures the shaft between two soft rollers, securing your stakeout pole quietly and with just the right amount of tension. Sold as a single pack.

To secure your ParkNPole off the side of your kayak, the ParkNPole RotoGrip pairs nicely with a set of SideArm Track Mounts or the DoubleHeader Track Mount. Compatible with YakAttack MightyMount’s, GearTrac, and most other factory installed kayak track systems and aftermarket track from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack and a six pack.

  • Utilizes the Mighty Bolt to attach to kayak track
  • 2.4" tall
  • GearTrac not included
  • Single pack
  • Patent Pending
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: GRP-1004
$16.95

YakAttack Rectangular Fish Finder Mount with Track Mounted LockNLoad Mounting System

No more ball mounts, no more slipping or rotating in the track. With the LockNLoad™ mounting system, this is the cleanest and most secure mounting solution for larger Lowrance, Garmin, and Raymarine units featuring a gimbal mount such as the Lowrance Hook2 7, Garmin Striker 9sv, and the Raymarine Axion 7. Features the LockNLoad mounting system offering ultra secure attachment.
$49.95

YakAttack RotoGrip Paddle Holder

Voted Product of the Year for Yak Angler's Kayak Anglers Choice Awards for 2016. 

The YakAttack RotoGrip™ Paddle Holder sheds a new light on the age old problem of paddle management. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). Kayak and SUP anglers have lots of options for installing and configuring this handy little gadget. Super low profile at 2.25" tall, the RotoGrip™ Paddle Holder grips the paddle shaft between two soft rollers, securing your paddle quietly and with just the right amount of tension. Sold in single packs.

  • Utilizes the Mighty Bolt to attach to kayak track
  • 2.25" tall
  • GearTrac not included
  • Single pack
  • Patent Pending
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: GRP-1001

$16.95

YakAttack Round Base Fish Finder Mount with Track Mounted LockNLoad Mounting System

No more ball mounts, no more slipping or rotating in the track. With the LockNLoad™ mounting system this is the cleanest and most secure mounting solution for Garmin and Raymarine units featuring a 3 hole pattern round base such as the Garmin Striker 4 and the Raymarine Dragonfly 7 Pro. Features the LockNLoad mounting system offering ultra secure attachment.
$49.95

YakAttack SideArm Track Mount

The YakAttack SideArm Track Mount was born out of using existing products to solve a rigging problem. Instead of using a standard 4” Extension Arm with a longer MightyBolt to offset a RotoGrip Paddle Holder, we created an off-the-shelf solution that accomplishes the task and then some. Any YakAttack track-mounted product that uses a single MightyBolt is compatible with the MightyMount at the end of the SideArm. You can also replace the knob of the SideArm with a LockNLoad accessory like a YakAttack Omega Rod Holder or PanFish Portrait Camera Mount. This feature provides the opportunity to mount two accessories from a single point. The RotoGrip Paddle Holder and ParkNPole RotoGrip are two commonly used accessories with the SideArm Track Mount.

Included with the SideArm Track Mount are two different Track Disk. These two Track Disks are designed to provide a snug fit in either the standard YakAttack GearTrac (GT90, GTSL90, GT175, MightyMount XL) or the wider opening of the YakAttack Top Loading family of GearTrac (GTTL90 and GTTL175). If a track system was included with your kayak, try both of them and determine which one will provide the best fit. Only one Track Disk is needed on the underside of the SideArm for the mount to work as designed. In addition, the Track Disks allow for the SideArm to be mounted in any direction in relation to the track or MightyMount it is attached to. For example, you can set up the SideArm directly off the side of your kayak for a paddle holder solution or having it facing inwards and virtually 360º anywhere in between.

Compatible with YakAttack MightyMount’s, GearTrac, and most other factory installed kayak track systems and aftermarket track from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack and a six pack.

The SideArm Track Mount is made in the USA from marine grade polymers and is backed by our Built for Life Guarantee.

  • Made in the USA
  • Built for Life Guarantee
  • Single point of attachment
  • LockNLoad Compatible
  • Includes two sizes of Track Disks
  • The SideArm Track Mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory installed kayak track.
  • SKU: TMA-1003
$19.95

YakAttack SideWinder Anchor Line Reel, Includes Track Hardware and 75 Feet of 550 Paracord

Get your anchor line under control with the YakAttack SideWinder! Designed to make anchor line management simple and effective, the YakAttack SideWinder has some great features packed into a simple and effective design. The line lock groove keeps just the right amount of line deployed, and the tail rope passage means it can be deployed outside your kayak anchor trolley ring for true quick release in dangerous situations. For flat water with no current, use the track mount holes in conjunction with the included Mighty Bolts and knobs to attach the SideWinder directly to your kayak's track system..

Includes hardware for install onto your kayak's track system
Includes 75 feet of 550 paracord
14"x6.38"x0.75"
Geartrac not included
$34.95

YakAttack Surface Mount Retractor

Secure your gear without bulky leashes or floats using the YakAttack Surface Mount Retractor. This super versatile unit combines the innovation you've come to expect from YakAttack and genuine T-Reign retracting mechanism, 36" Kevlar cord, and a removable 4" tether. Designed for surface mounting, this kit comes complete with blunt end thread forming screws for threading directly into rotomolded and thermoformed kayaks.
  • Made from UV Resistant High Density Polyethylene
  • 36" Kevlar Cord
  • Removable 4" tether
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: RET-1001
$29.95

YakAttack Tie-Down Eyelets 2 pack

These tie-downs come with a Mighty Bolt base. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). Perfect as an anchoring point to secure a cooler or other accessory, as well as being a great adjustment point for directing steering cables on the deck of your kayak. Sold in a two-pack.
  • Patent Pending
  • 2 Pack
  • Made of stainless steel
  • Compatible with GearTrac, MightyMounts, and most other factory-installed track systems
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: AAP-1016
$16.95

YakAttack Torqeedo Throttle Mount

YAKATTACK TORQEEDO THROTTLE MOUNT WITH TRACK MOUNTED LOCKNLOAD MOUNTING SYSTEM (TQM-1001)

Featuring the LockNLoad mounting system this throttle mount is a great solution for attaching your Torqeedo throttle to YakAttack GearTrac, MightyMount II, MightyMount XL or most other factory-installed kayak track. The LockNLoad base gives you peace of mind offering an ultra secure install, but is also very easy to adjust on the water and attach or remove. Includes all necessary hardware. Patent pending. Torqeedo throttle not included. Compatible with YakAttack MightyMounts, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack and a six pack.

The LockNLoad track mount system is the most innovative mounting system on the market, and is exactly what you'd expect from the industry leaders in track mounting technology. There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use:

  • From locked mode, simply squeeze a lever to go into adjustment mode.
  • In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the accessory is completely secure while making adjustments. Let go of the lever and you are back in locked mode.
  • To go to removal mode, flip the lever out, and the system easily slides off of the track mount.
  • GearTrac and Torqueedo throttle not included
  • Made in the USA
  • Patent Pending
  • SKU: TQM-1001
$49.95

YakAttack Track Mounted Retractor

Secure your kayak fishing gear without bulky leashes or floats using the YakAttack Track Mount Retractor. This super versatile unit combines the innovation you've come to expect from YakAttack and genuine T-Reign retracting mechanism, 36" Kevlar cord, and a removable 4" tether. Designed for track mounting, this kit comes complete with everything you need.
GearTrac not included.


  • UV Resistant High Density Polyethylene
  • 36" Kevlar Cord
  • Removable 4" tether
$34.95

YakAttack Track Nut Kit, 6pk

1/4-20 track nut. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible.
  • Pack of 6 track nuts
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: TN-1420-6
$11.95

YakAttack Universal Mounting Plate

This product is a DIY mount and you will be required to drill holes to mount something like a Humminbird PiranhaMAX 4 to the mounting plate. Since every install will most likely be different no extra screws, nuts, or washers are included, and it is up to the user to find their own hardware for this install.

Mounting plate is 6" x 3.5"
$49.95

YakAttack Vertical Tie Downs Track Mount 2 pack

The YakAttack Track Mount Vertical Tie Downs come with a Mighty Bolt base. erfect as an anchoring point to secure a cooler or any other accessory to the track. Designed to work with 1'' and 1.5'' flat webbing and can also be used with bungee. Made in the USA from premium materials for a lifetime of use in even the harshest environments. Sold in a 2 pack.
$19.95

YakAttack VISICarbon Pro, MightyMount and GearTrac ready

Designed to meet the needs of all anglers- from serious kayak fishermen to recreational paddlers- the VISICarbon Pro™exhibits unprecedented performance in light weight, low drag, and portability- all with plenty of style. The ultra-thin mast and instantly recognizable flag combine to offer excellent performance with low wind resistance, and enhances your visibility on the water, night and day. The VISICarbon Pro™ light is complete with an LED module, which will burn for 100 hours on 3 AA batteries (included) and provides 360° visibility. The Silent Snap flag attachment provides a secure fastening that can be left for hours, or removed in seconds. The collapsed unit fits inside the flag for easy organization, creating a convenient and portable storage solution at only 14" long. The deployed VISICarbon Pro™ is 48" long. The SilentSlip foam at the base of the unit floats, but still fits into most flush mount and tubular rod holders. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems.

Enhances your visibility day or night.
SilentSlip foam fits most flush mount and tubular rod holders.
48" long deployed, 14" collapsed.
Collapsed unit stores inside flag.
It floats!
Designed with carbon fiber tubing for stiffness and ultra light weight.
Silent Snap flag attachment system provides quick and easy flag installation and removal.
LEDs burn 100 hours on 3 AA batteries (included).
10,000+ hours lamp life.
$94.95

YakAttack Zooka II Rod Holder with Track Mounted LockNLoad Mounting System

The Zooka II attaches to your kayak, boat, or other watercraft with YakAttack’s brand new LockNLoad mounting system, and is exactly what you would expect from the leader in track mounting technology. Offering unrivaled track mount security and adjustability, the patent pending LockNLoad track base is the most advanced track mount ever created. You want no slip? No problem. The LockNLoad track base attaches quickly and easily with a single MightyBolt, but will not accidentally rotate or loosen from the track, even when your trolling rod takes a big hit.

There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use:

- From locked mode, simply squeeze a lever to go into adjustment mode.

- In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you are back in locked mode.

- To go to removal mode, flip the lever out, and the system easily slides off of the track mount.
$41.95

Follow us on social media!