Thanks for registering your Slayer Propel 10!
Now that you have registered your kayak, let us help you create the best experience on the water
Accessories
Adapter Kit Slugs for Groove 1/4-20
The Groove Adapter Slugs Kit allows almost any gear to be mounted on the Versa Board Groove Kit mounting system
Aluminum Rail Set (2), 20" Curved SP10, includes hardware
More rails, more accessories. Fits: Slayer Propel 10, Slayer Propel 13, Ultimate FX 12, Ultimate FX 15, Ultimate 12, Ultimate 14.5, Slayer 12 (non propel), and Slayer 14.5 (non propel)
Back Pack, Behind Seat
The First Class Seat Pack contours perfectly to the seat frame offering multiple easily accessible storage options. The front has two mesh pockets, the vertical zipper along the side makes it easy to get inside the main pocket without turning around, and the large back pocket is an excellent location for a hydration bladder or other items you want to keep on hand. SKU: APAC001
Cam-Lok Paddle Holder Set Assembly
Captain's Bridge Accessory Mount Crossbar
Create the ultimate kayak fishing console with the Captain's Bridge. With dual mounting tracks on the top of the console as well as a track running down each side, their are many ways to mount you fish finders and other kayak fishing accessories.
- The maximum mounting width of the 26" Captain's bridge is 25"
- The Maximum mounting width of the 32" Captain's bridge is 31"
- Additional Note regarding the Titan X and PWR Mounting: The 26" and the 32" will both fit on the Titan X in the bow mounting area and across the gunnel. If you are using a Pedal Drive you will want to mount in the bow area. For the PWR, both sizes will fit on the bow mounting area of the PWR and only the 32" will fit across the gunnel.
- Tip: When going more towards the bow of the boat, the 26" might be better whereas mounting on the gunnels may be a better fit for the 32" due to the mounting width requirements stated above.
2. The screen size for your graphs: For example: If you are wanting to put dual monitors over 9" you may want to use the 32" to provide more space on the bar.
Crank Seal Replacement Kit
SKU: APRO008
FRABILL - Bearclaw Kayak Fishing Net
Kayakers, paddle boarders and anyone fishing with one hand free can now achieve powerful catches with the Trophy Haul™ Bearclaw Night. Simply wrap the support bar around the forearm and grab the handle right at the yoke for easy one-handed operation. The conservation netting and asymmetrical design protect fish as they smoothly slide into the flat bottom.
- HANDLE LENGTH: 18"
- HANDLE TYPE: BEARCLAW
- HOOP SHAPE: MESHGUARD™
- HOOP SIZE: 14" X 18"
- SIMPLE HANDLE TYPE: FIXED
- SIMPLE NETTING TYPE: COATED
- YOKE: TROPHY HAUL
FX Anchor Trolley System- Floating Pulley
SKU: AANT001
High Frame Seat
Look for your boat model under the size selection.
-ASEA031, the Slayer Propel 10 and 13 is the 2" taller seat, with an upgraded quilted glove.
-PSEA458P, the Hi-Low replaces the Kiawah, Falcon, Slayer 12/14.5, and FX 12/15. This has the standard glove and is seat base (not 2" taller).
-ASEA032, the Slayer Max is the 2" taller seat, with a Tackle Drawer. This does not fit the earlier version with roto molded base.
-ASEA030, this is the original Titan seat. Also for the XC and original version of the Slayer Max 12.5. It sits on the roto molded base.
Ketch ID
Slides on your Ketch board for easy maneuvering
Adjustable to fight against sunlight
Comes with ID Card holder
Note: Before applying dual loc to clear ID Holder, clean surface for better adhesion
Ketch Keeper
Fits all Ketch Boards
Standard Kit comes with 10-32 3/8” bolts 10-32 t-nuts for t-track X2 each per package.
Krate Kit comes with 10-32 x 1” Nylon lock nuts Washers X4 of each per package.
Stainless Steel Hardware
Kit ProPel Lubrication
To keep your Propel Pedal Drive (patent pending) operating in peak condition, you should keep it clean and periodically add lubricant to the crank. This kit includes the tools and lubricant used in the general maintenance needed to ensure optimal performance for the lifetime of your Propel system(patent pending).
- Includes 3.5 oz. of lubricant, pump with extended nozzle and 3/16" allen key to access fill port
SKU: AKIT001
Kit Replacement Propeller Bullnose 2019
SKU: APRO002
Latch kit, Finger Loop Pull Sliders Only 2021- Set of 3
Set of 3 Propel Pedal Drive thwart locking latches, finger loop pull style. Bases and hardware not included.
Lower Transmission Rebuild Kit
Includes Propeller Cartridge, Bearings, Lower Transmission Gear, and O Ring. Increases the efficiency and performance of well-used drives.
SKU: APRO006
Native Kayak Kushion
-Light weight patented technology for more enjoyment
- High quality grade sewing
-Tactical straps with anti slip cam buckles
-Breathable material
-Zipper accessibility
-Non-collapsible & functional
Native Watercraft Karbonate Board
- Native Watercraft Branded
- Available in 26" and 32" sizes
- KBF Approved
- High color yellow that’s easy to read and extremely durable.
- Built in Cradle
- Compatible with floating kit (coming soon!)
Native Watercraft Kayak Covers
Native Watercraft kayak covers are custom made to fit our kayaks just right. Each cover includes a full set of cover tie down straps (one for each loop set) that can be used to secure the cover when traveling through the sewn in loops on the cover. All covers are made in USA and created with marine-grade anti-wick thread that includes double-stitched construction and 4-ply join seams.
Native Watercraft Kayak Covers
Native Watercraft kayak covers are custom made to fit our kayaks just right. Each cover includes a full set of cover tie down straps (one for each loop set) that can be used to secure the cover when traveling through the sewn in loops on the cover. All covers are made in USA and created with marine-grade anti-wick thread that includes double-stitched construction and 4-ply join seams.
Native Watercraft Ketch X Board
Native Watercraft Branded
Tether holes CNC machined on fence end of the board.
High color contrast that’s easy to read and extremely durable.
Tournament numbers on top of Kradle edge
Ketch Kradle incorporated into board (all one piece)
Widened fence
Native Watercraft Springblade Rudder System
- Easier to turn handle
- Quicker turning
- Great tracking
- Steer the boat in the stowed or deployed position, which helps with steering in shallow water
- Tightened turning radius
- Easy installation
- Better turning performance in rough conditions
- Improved tension lock for steering cables
- Stow and deploy from your seat
- Fits: Slayer Propel 10/13, Titan Propel 10.5/12/13.5
- External Installation
- Installation video
- Fits TitanX 10.5/12.5, Slayer Propel Max 10, NEW FOR 2022 SLAYER PROPEL MAX 12.5, PRE 2022 SLAYER MAX 12.5 (single electronics switch panel MUST BE EXTERNALLY INSTALLED - PLEASE WATCH VIDEO ABOVE FOR THIS INSTALLATION)
- Internal Installation
- Installation Video for the Slayer Propel Max 10
- Installation Video for the NEW FOR 2022 SLAYER PROPEL MAX 12.5 (Dual Electronics Switch Panel)
Native Watercraft Swivel Seat Upgrade Kit for Select Models
This Swivel Seat Upgrade kit is compatible with:
- 2022 and newer Slayer Max 10 and 12.5
- Slayer Propel 10 LTE
- Slayer Propel 10
- Slayer Propel 13
- Ultimate FX Propel
Kit includes seat, swivel, seat base and all necessary hardware.
Native Watercraft Swivel Seat Upgrade Kit for Select Models
This Swivel Seat Upgrade kit is compatible with:
- 2022 and newer Slayer Max 10 and 12.5
- Slayer Propel 10 LTE
- Slayer Propel 10
- Slayer Propel 13
- Ultimate FX Propel
Kit includes seat, swivel, seat base and all necessary hardware.
Native Watercraft Tackle Drawer Kit for 3" High Frame Seat
Upgrade your high frame Native Watercraft seat with this handy tackle drawer. Designed specifically for high-frame seat kayaks with a 3-inch seat base, this innovative accessory kit is a sliding tackle drawer that easily attaches to the seat frame. With its secure mounting system and durable construction, it's the perfect way to keep all of your tackle and loose items within reach, right underneath your seat.
Installation requires riveting three rivets (included) to both the left and right side rail that the drawer slides on.
Here is how to confirm the drawer will fit on your seat? The High Frame Seat has 3" of clearance between the front/ lower support bar and the upper support bar when measured as shown below.
NRS Chinook Fishing PFD
The evolution of NRS Chinook Fishing PFD, our best-selling life jacket, depends on our designers listening to the reviews of anglers around the world. And we do. With reconfigured pocket designs, the Chinook makes catching the adventure safer and more effective on the water.
- The Chinook is a Type III, medium profile life jacket delivering 16.5 pounds of flotation.
- Zippered front entry for quick donning and six adjustment points for a customized fit.
- PlushFit™ foam and a high-back design combine to create an extremely comfortable vest for any type of raft or kayak seat.
- A mesh lower-back offers added ventilation on warm days.
- Two large clamshell pockets, sized for tackle boxes, feature updated internal organization based on angler reviews.
- A single, exterior pocket on the angler's right side offers easily accessible storage.
- A fifth, tool holder pocket offers quick access to pliers, line cutters or other fishing gadgets and secures with a hook-and-loop fastener.
- Also features a rod holder, strobe attachment point, reflective accents and knife lash tab.
Pedal and Crank Arm Upgrade Kit
Includes 2020 pedals and crank arms that come standard on the 701 series Propel Pedal Drive. Retrofittable to all 301 series or newer Propel Pedal Drive units
NOTE: This kit does not include a crank arm puller. The crank arm puller can be purchased on numerous online stores.
SKU: APRO013
Pedal Upgrade Kit
Power-Pole Micro Anchor Fishing Kayak Kit
This kit includes:
- Power-Pole Micro Anchor
- Micro Battery Pak with Charger
- Ultra-Lite Spike
- YakAttack Through Hull Wiring Kit
- Attachment Hardware
Propel Indexer
SKU: APRO010
Propel Steering Assembly Kits
Propel Steering Assembly Kits...please note you need to choose your boat, cable or HMPE line, and if a Slayer Propel 10....built before or after February, 2021.
Rudder Cable Replacement Kit, Propel Models
SKU: ACAB001
Seat Back Tackle Box Storage
SKU: ASTO015
Sidekick Rod Butt Lay
Rod butt lay sets for use with Sidekick set ups. Please choose a single or double recess.
Double Overmount pictured.
SKU: ABUT004, ABUT005
SideKick Wheel Transport System- Native
The Native Watercraft Sidekick comes ready to mount to make your kayak easy to transport to and from the water.
Optional upgrade that fits ALL Propel Models except the LT and Manta Ray.
PLEASE NOTE: Maximum added weight to the boat is 50lbs. So 50lbs in additional gear is the most we recommend you carry inside the kayak while using the Sidekick. We also don't recommend adding weight when going over rough terrain, curbs, or dropping out of the back of a pick up truck."
Slayer Propel 10 LTE Front Hatch Bucket
This bucket fits the bow hatch of the Slayer Propel 10 LTE.
Tournament Rail Tool and Tackle Caddy
SKU: ASTO012
Transom Thwart Motor Mount - 14"
This motor mount will allow you to use an electric motor with your Native Watercraft Propel kayak.
The 14″ Thwart Mount for the Slayer Propel Max 10, Slayer Propel Max 12.5, Titan Propel 10.5, Titan Propel 12, Titan Propel 13.5, Ultimate FX Propel 13, Manta Ray Propel 12, and Slayer Propel 12 LT.
Trolley Anchor System
SKU: AATR112
Upper Transmission Rebuild Kit
SKU: APRO005
YakAttack AR Tube Rod Holder with Track Mounted LockNLoad Mounting System
The YakAttack Advanced Rod Tube™ is our take on the classic tube-style rod holder designed for spinning and casting rods and reels. It features a gimbal lock that flips into place to accommodate longer rods as well as multiple attachment points on the bottom side for rod leashes, increasing gear security. Made from marine grade polymers the AR Tube is built to last and comes with our Built for Life Guarantee. The AR Rod Tube is track-mount ready, and features the LockNLoad™ Mounting System. The LockNLoad system offers unrivaled track-mount security, but its also incredibly easy to adjust. GearTrac not included
There are 3 modes: locked, adjustment, and removal.
- From locked mode, simply squeeze a lever to go into adjustment mode.
- In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you are back in locked mode.
- To go to removal mode, flip the lever out, and the system easily slides off of the track mount.
YakAttack BlackPak Pro Kayak Fishing Crate - 13 x 13
Product Information
Description
The original hard-sided kayak crate just got better. A lot better. Introducing the completely redesigned BlackPak Pro.
The result of intense collaboration and more than a year of R&D and design, the BlackPak Pro is fully riggable and boasts a hinged lid, 25% weight reduction, and best-in-class functionality. Enhancements include many things you might have expected, as well as some true-to-the-brand features that no one saw coming.
Size
The BLP-PRO-13X13 is 13” x 13” x 13” (L,W,H) and weights in at 6.9 lbs. without TetherTubes and 8.2 lbs. with the included three TetherTubes . The BlackPak Pro also comes in two other sizes, 13” x 16” and a 16” x 16”.
Construction and Assembly
Injection-molded from UV stabilized polymers, the BlackPak Pro will last for many years, even in harsh marine environments. The ultra-stiff panels utilize a rib structure that offers exceptional rigidity with minimal weight, while their interlocking joints ensure an intuitive, frustration-free assembly process. Interlocking GridLoc panels utilize a tongue and groove edge design to make assembly a breeze. Just press them together (they won’t fall apart during assembly) and install the (included) stainless steel screws using a simple screwdriver.
Hinged Lid
The water shedding lid with fully adjustable hinges allows you to go from freely pivoting to a sticky setting that maintains the lid position when you let go of it, while integrated overtravel stops keep the lid within reach and limit it to a manageable angle. Sound dampening rubber bumpers ensure quiet closing of the lid, and the unique CatchLatch retention system secures the lid in a simple but surprisingly functional manner.
Rod Holders
The included three TetherTube rod holders with integrated but easily removable hook and tether systems ensure your rods stay put if things go wrong. Caged attachment points on both sides of the tube offer multiple hook points, and the oversized hook design is sized to attach directly to the shaft of your fishing rod if desired. The TetherTube rod holder mounts to the GridLoc panels using at least three of the four standoff pads, enabling several vertical positioning options. Mount them high for rods with long butts, or mount them low to elevate the BlackPak Pro into the HighNDry position.
Tankwell Security
Rubber feet offer noise dampening and isolation, while Omni corner brackets enable multiple hold-down methods. They are designed as attachment points for YakAttack OmniHooks (four of which are included), generic hooks, carabiners, or simple bungee.
Storage
Optimized for a wide variety of tackle boxes, including Plano 3700, Plano Edge, Bass Mafia Bait Coffin, Flambeau, and many more.
Rigability
The key to customizing and accessorizing the BlackPak Pro lies in the highly revolutionary GridLoc 2D mounting system, which offers a plethora of attachment points on the inside and outside of the panels. This gives our design team a platform for which they can design a myriad of dividers, holders, and other attachments. Development of these accessories is already underway!
Features:
- 3 Rod Holders with built-in rod leashes
- Optimized for 3600 sized tackle boxes
- Fits eight 3600 Plano boxes
- Hinged lid with secure latches
- New lightweight construction
- GridLoc Mounting Platform located on every panel
- Rubberized feet and built in noise dampening features
- Internal dimensions (L, W, H) – 11.9” x 11.9” x 11.75”
- External dimensions (L, W, H) – 12.94” x 12.94” x 13.3”
- 6.9 lbs. without TetherTubes and 8.2 lbs. with included three TetherTubes
- When measuring your kayak's tankwell add 2.75" for every side you intend to attach TetherTubes
- Build for use in harsh marine conditions
- Includes stainless steel hardware
- Made in the USA
- Built for Life Guarantee
- SKU: BLP-PRO-13X13
YakAttack Cam Straps 12 Feet 2 Pack
The YakAttack Cam Straps are an essential for any kayak angler. The high-quality polyester webbing has a higher break strength, superior resistance to abrasion, less stretch, better UV resistance, and increased water resistance compared to common polypropylene straps sold by most companies. The custom rubber buckle cover helps prevent dents and scratches while car topping.
- Sold in a 2 pack
- 12 ft. long
- 1 inch wide webbing
- Made with high-quality polyester webbing
- Custom rubber buckle cover
- Buckle and webbing are made in China
- Buckle cover and sewing are done in the USA
- SKU: YEP-1006-12
YakAttack CatchNRelease Drip Rings
YakAttack CatchNRelease Drip Ring - Pair (YEP-1001)
This deep dish CatchNRelease Drip Ring features a unique design which catches water coming off the paddle blade in the high position, and releases it back into the water during your downstroke. We think this is the driest drip ring on the market. Soft and supple, the CatchNRelease Drip Ring is designed to fit all common sized paddle shafts including Werner, Bending Branches, and other popular brands of kayak paddles.
- Sold in a two pack
- Fits standard diameter kayak paddles
- Made in the USA
- SKU: YEP-1001
YakAttack CellBlok
Interior Space - 6.375'' x 4.25'' x 2.60''
Exterior Dimensions - 10.25'' x 6.75'' x 3.50''
CellBlok box only with hardware to attach to GearTrac.
YakAttack Complete LockNLoad Track Base
YakAttack’s LockNLoad™ mounting system, is exactly what you would expect from the leader in track mounting technology. Offering unrivaled track mount security and adjustability, the patent pending LockNLoad™ track base is the most advanced track mount ever created. You want no slip? No problem. The LockNLoad track base attaches quickly and easily with a single MightyBolt™, but will not accidentally rotate or loosen from the track, even when your trolling rod takes a big hit. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6).
- Made in the USA
- Covered by our Built for Life Guarantee
- SKU: LNL-1001
YakAttack DoubleHeader Track Mount
In typical YakAttack fashion, they started as an idea for a single offset RotoGrip Paddle Holder resulted in a product with a bit more versatility. The end result of the DoubleHeader Track Mount was a unique addition to the YakAttack product line that allows the ability to attach various accessories using a single attachment point. If you already own two RotoGrip Paddle Holders, then simply remove the rubber washer included with your paddle holders, insert the MightyBolt through the underside of the DoubleHeader, and tighten the body of the RotoGrip. The DoubleHeader in that configuration provides the perfect offset paddle holder solution moving your paddle off the side of your kayak, freeing up track space. Let’s say you want to add dual Omega Rod Holders for crappie fishing. The mounting holes at the end of the DoubleHeader are LockNLoad compatible and allow for easy attachment of LockNLoad accessories like the Omega or Omega Pro. Looking to maximize the number of rods on your kayak for tournament day? The DoubleHeader Track Mount serves as the perfect mounting system for dual AR Tube Rod Holders.
If you are tight on track space, the DoubleHeader includes an additional feature to add LockNLoad accessories like YakAttack rod holders, camera mounts, and more. Simply replace the stock knob and MightyBolt from the DoubleHeader with the LockNLoad base of a rod holder or other accessories, and you are able to have multiple attachments on a short section of track or a single point of attachment like a MightyMount II. The DoubleHeader track mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory-installed kayak track.
Included with the DoubleHeader are two different Track Disk. These two Track Disks are designed to provide a snug fit in either the standard YakAttack GearTrac (GT90, GTSL90, GT175, MightyMount XL) or the wider opening of the YakAttack Top Loading family of GearTrac (GTTL90 and GTTL175). If a track system came included with your kayak, try both of them and determine which one will provide the best fit.
The DoubleHeader Track Mount is made in the USA from marine grade polymers and is backed by our Built for Life Guarantee.
- Made in the USA
- Built for Life Guarantee
- Single point of attachment
- LockNLoad Compatible
- Includes two sizes of Track Disks
- DoubleHeader is 8.25” wide
- The DoubleHeader Track Mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory installed kayak track.
YakAttack DoubleHeader w/ Dual RotoGrips
In typical YakAttack fashion, they started as an idea for a single offset RotoGrip Paddle Holder resulted in a product with a bit more versatility. The DoubleHeader track mount can serve several different purposes, but in this case, it is the foundation for the perfect offset paddle holder solution that our customers have been dreaming of ever since the launch of the RotoGrip several years back. Compatible with standard diameter kayak paddles the RotoGrip Paddle Holder has become the most widely used paddle holder in the industry. The RotoGrip is a simple yet highly effective paddle holder solution, but many paddlers wanted to use one or two RotoGrips on a single side of the kayak. When using two RotoGrips on a single piece of track, you get a nice tight hold, but you also cover up the entire length of the track with your paddle, rendering open track space useless. The DoubleHeader in this configuration eliminates that problem entirely and offsets the paddle holders off the kayak allowing for the full functionality of the remaining track space for other accessories. If you are tight on track space, the DoubleHeader includes an additional feature to add LockNLoad accessories like YakAttack rod holders, camera mounts, and more. Simply replace the stock knob from the DoubleHeader with the LockNLoad base of a rod holder or other accessories, and you are able to have multiple attachments on a short section of track or a single point of attachment like a MightyMount II. The DoubleHeader track mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory installed kayak track.
Included with the DoubleHeader are two different Track Disk. These two Track Disks are designed to provide a snug fit in either the standard YakAttack GearTrac (GT90, GTSL90, GT175, MightyMount XL) or the wider opening of the YakAttack Top Loading family of GearTrac (GTTL90 and GTTL175). If a track system came included with your kayak, try both of them and determine which one will provide the best fit.
For added paddle security, included with the DoubleHeader and RotoGrip’s are two SnapNStrap Security Tethers. To secure your paddle unhook the bungee tab from the stored position on the base of the DoubleHeader, wrap it around the shaft of your paddle, and loop it over the tab on the outward side of the RotoGrip. This feature will come in handy for kayakers using pedal drive kayaks like a Hobie or motors like a Torqeedo or MotorGuide. In those situations, a paddle might not be needed all the time, so the security tethers provide extra peace of mind knowing your paddle is safe and sound. If you need quick access to your paddle at a moment's notice, the tethers have a stored position, so they do not get in the way when inserting or removing your paddle from the dual RotoGrips.
The DoubleHeader with Dual RotoGrip Paddle Holders is made in the USA from marine grade polymers and is backed by our Built for Life Guarantee.
- Made in the USA
- Built for Life Guarantee
- Single point of attachment
- LockNLoad Compatible
- Includes two RotoGrip Paddle Holders
- Includes two SnapNStrap Security Tethers
- Includes two sizes of Track Disks
- Perfect for anglers with pedal kayaks or motors
- Compatible with standard diameter kayak paddles
- DoubleHeader is 8.25” wide
- The DoubleHeader track mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory installed kayak track.
YakAttack GearTrac Hardware Kit
- 4 Stainless Steel MightyBolts
- 4 Convertible Knobs
- 4 Track Nuts
- 4 Socket Head Cap Screws
- All Standard 1/4-20 Thread
- Patent Pending
- Made in the USA
- Covered by our Built for Life Guarantee
- SKU: HRC-1004
YakAttack GT Cleat XL
The larger and heavier-duty version to our original GT Cleat, the GT Cleat XL™ is our simple and highly effective answer to the issue of line management. It attaches to all YakAttack® GearTrac™, MightyMount XL tracks, and most other kayak track systems. The GT Cleat XL makes for a perfect companion to our highly popular LeverLoc™ Anchor Trolley and is a low profile, easy to attach and adjust anchor line cleat. The underside of the cleat features two tabs and a rubber washer helping keep the cleat from rotating and sliding in the track from anchor line tension. Best used with 1/2" rope.
- Compatible with YakAttack GearTrac, MightyMount, and most other factory-installed kayak track systems
- Best used with 1/2" rope
- Made in the USA
- Covered by our Built for Life Guarantee
- SKU: MTA-1004
YakAttack HD Mount LockNLoad
YakAttack’s LockNLoad™ mounting system is exactly what you would expect from the leader in track mounting technology. Now, enjoy the versatility and ingenuity of the LockNLoad System in heavy duty applications such as trolling for big game. Due to the two MightyBolt attachment points, the HD Track Mount gives you more gear security than ever before! No track? No problem! You can easily remove the two MightyBolts and use hardware to quickly deck mount your YakAttack rod holder or fish finder, as well as using holes from old-school deck mounts to mount the HD Track Mount crossways. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack and a six pack.
- Two MightyBolt attachment points gives you better gear security
- Not for use with under 8" of track
- For Heavy Duty applications
- Can be used for deck mounting
- Utilizes pre-drilled holes from old-school deck mounts to be mounted crossways
- Made in the USA
- Covered by our Built for Life Guarantee
- SKU: LNL-1006
YakAttack Horizontal Tie Downs
This track mounted tie-down allows a quick and easy attachment point for webbing, small ropes, and bungee in configurations in which the Vertical Tie Down is not ideal. Perfect for securing Blackpaks™, other crate systems, and large gear bags in a kayak tankwell. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack and a six pack.
- Sold in 2 pack
- Attaches to YakAttack® GearTrac™, MightyMounts, and most other factory installed kayak track
- Use with 1"-1.5" webbing straps or bungee
- Made in the USA
- Covered by our Built for Life Guarantee
- SKU: AAP-1027
YakAttack Leverage Landing Net, 20 Inch x 21 Inch Hoop with Foam Extension
- Revolutionary Forearm Grip
- Folds for Easy Storage
- Full Rubber Net
- Extended Foam Covered Handle
- Wider, more traditionally designed hoop
- 20" X 21" Hoop
- 54" overall length
Leverage Landing Net is a registered trademark of YakAttack, LLC
- Netting is molded in Taiwan
- All other components are made and assembled in the USA
- Covered by our Built for Life Guarantee
YakAttack LeverLoc Anchor Trolley
The first anchor trolley designed specifically for the job, the YakAttack LeverLoc™ Anchor Trolley features a LeverLoc™ line clamp, which locks your trolley line in place with a simple “flip of a switch” motion. Keeping the trolley lines in line is the PadHook, a simple but clever design that combines the functionality of both a pad-eye and a hook, keeping even the tightest trolley lines in place on the side of the kayak, not over your gunwale. When not in use, the easy-knot trolley ring snaps into the base of the LeverLoc™, quietly secured until deployed. Includes 35’ of USA made 550 paracord with a highly reflective tracer. Features YakAttack Stealth Pulleys for super smooth operation.
- Easy installation
- New YakAttack Stealth Pulleys
- 35' of highly reflective USA-made 550 paracord
- Includes all necessary hardware for installation
- Made in the USA
- Covered by our Built for Life Guarantee
- SKU: AMS-1003
YakAttack LeverLoc Anchor Trolley HD
The first anchor trolley designed specifically for the job, the YakAttack LeverLoc™ Anchor Trolley features a LeverLoc™ line clamp, which locks your trolley line in place with a simple “flip of a switch” motion. Keeping the trolley lines in line is the PadHook, a simple but clever design that combines the functionality of both a pad-eye and a hook, keeping even the tightest trolley lines in place on the side of the kayak, not over your gunwale. When not in use, the easy-knot trolley ring snaps into the base of the LeverLoc™, quietly secured until deployed. Includes 35’ of USA made 550 paracord with a highly reflective tracer. This model features the HD option, which gets you two extra PadHooks plus backing plates for the pulleys and LeverLoc™, enabling a heavy duty install when compared to the self-threading screws included in the standard kit. Features YakAttack Stealth Pulleys for super smooth operation. The use of a YakAttack Rigging Bullet, RB1032, is highly recommend for installs where the install location is out of arms reach.
- Easy installation
- New YakAttack Stealth Pulleys
- 35' of highly reflective USA-made 550 paracord
- Includes all necessary hardware for installation
- Heavy duty
- Includes backing plates and extra Padhooks not included in AMS-1003.
- Made in the USA
- Covered by our Built for Life Guarantee
- SKU: AMS-1004
YakAttack LNL Extension
This 4" or 8” extension arm allows you to increase the height and adjustability of your YakAttack accessory that features the LockNLoad™ mounting system like rod holders, fish finder mounts, and more. Includes all necessary hardware.
- Made in the USA
- Covered by our Built for Life Guarantee
- SKU: LNL-1003
YakAttack Lowrance Hook2 Fish Finder Mount with Track Mounted LockNLoad Mounting
Designed to replace the factory base on Lowrance Hook2 4 and 5, Reveal 5, and Simrad Cruise 5. This Lowrance Fishfinder Mount is a simple, clean, and a highly effective solution. This mount improves on the original included mount enabling fast and easy one-handed display adjustment. Includes the LockNLoad Mounting System for maximum versatility and rigidity. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6).
- GearTrac not included
- Fishfinder not included
- Made in the USA
- Covered by our Built for Life Guarantee
- Patent Pending
- SKU: FFP-1006
YakAttack MightyBolt - 6 pack - 2"
- Six stainless steel MightyBolts™
- 1", 1.5'', or 2" Long Stud
- 1/2" Wide Head
- 1/4-20 Threading
- Patent Pending
- Made in the USA
- Covered by our Built for Life Guarantee
- SKU: MB15-12-6
YakAttack MightyMount II with FullBack plate
Mighty Mount II is 2"x2.375"x.5"
Contains all necessary hardware
YakAttack MultiMount Cup Holder
YAKATTACK MULTIMOUNT CUP HOLDER
The YakAttack MultiMount Cup Holder quickly and easily attaches to YakAttack GearTrac, MightyMount, Native Watercraft gear track, Bonafide Kayaks Gear Track and most other kayak track systems.
Designed for maximum versatility, the MultiMount Cup Holder accepts anything from stainless steel tumblers to Nalgene Bottles to 12 oz cans and water bottles.
The MultiMount Cup Holder also makes a great place to put small tools and other items. Made from premium materials for a lifetime of use in even the harshest environments.
Keep your beverage at reach while kayak fishing with the MultiMount Cup Holder!
KEY FEATURES
- Fits various different size beverage containers
- Large enough to store a can with a koozie
- GearTrac and MightyMount ready without any additional components
- Bottle not included
YakAttack Omega Pro Rod Holder
The YakAttack Omega Pro series rod holders are the last rod holder you’ll ever need.
The Omega Pro adds an extension arm to help get your reel higher off the water or helps accommodate longer rod butts.
The Omega Pro Rod Holder is a truly universal solution that works flawlessly with spinning, casting, larger conventional reels, and yes – even fly rods of all sizes. A 360 degree rotating collar offers the ability to quickly secure the rod by capturing the reel, and allows spinning reels to be stowed in the natural downward position, not hung off the side. Multiple modes allow anglers to easily stage rods for quick access or lock them in for maximum security.
The Omega Pro Rod Holder attaches to your kayak, boat, or other watercraft with YakAttack’s LockNLoad mounting system, and is exactly what you would expect from the leader in track mounting technology.
Offering unrivaled track mount security and adjustability, the patent pending LockNLoad track base is the most advanced track mount ever created. You want no slip? No problem. The LockNLoad track base attaches quickly and easily with a single MightyBolt, but will not accidentally rotate or loosen from the track, even when your trolling rod takes a big hit.
Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear.
There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use:
- From locked mode, simply squeeze a lever to go into adjustment mode.
- In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you back in locked mode.
- To go to removal mode, flip the lever out, and the system easily slides off of the track mount.
- Gear Trac not included
- Made in the USA
- Covered by our Built for Life Guarantee
- Patent Pending
YakAttack Omega Rod Holder with Track Mounted LockNLoad Mounting System
The Omega Rod Holder attaches to your kayak, boat, or other watercraft with YakAttack’s brand new LockNLoad mounting system, and is exactly what you would expect from the leader in track mounting technology. Offering unrivaled track mount security and adjustability, the patent pending LockNLoad track base is the most advanced track mount ever created. You want no slip? No problem. The LockNLoad track base attaches quickly and easily with a single MightyBolt, but will not accidentally rotate or loosen from the track, even when your trolling rod takes a big hit.
There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use:
- From locked mode, simply squeeze a lever to go into adjustment mode.
- In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you back in locked mode.
- To go to removal mode, flip the lever out, and the system easily slides off of the track mount.
YakAttack Padhook Kit - 6 pack
The PadHook, a simple but clever design by YakAttack that combines the functionality of both a pad-eye and a hook can be used in applications ranging from anchor trolleys, deck rigging, and other installs where bungee, rope, or other cordage are used. When used with the YakAttack LeverLoc Anchor Trolley or other anchor trolley systems the PadHook is a great tool for guiding the trolley lines and keep even the tightest trolley lines in place on the side of the kayak, not over your gunwale.
- Six PadHooks
- Stainless steel hardware included.
- Made in the USA
- Covered by our Built for Life Guarantee
- SKU: AMS-1007
YakAttack PanFish Portrait Pro Camera Mount
- From locked mode, simply squeeze a lever to go into adjustment mode.
- In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you back in locked mode.
- To go to removal mode, flip the lever out, and the system easily slides off of the track mount.
The ultra-durable construction of the PanFish Portrait Pro™ is not only super lightweight - it's also incredibly rigid, reducing shake in your camera footage.
Utilizes the LockNLoad™ Track Mount System for easy on and off, angled articulation, and rotational pivoting
Durable, lightweight, and super rigid construction
Features the new YakAttack Camera Ball
For use with camera utilizing a 1/4-20 mount or GoPro Cameras
11.5" Tall
YakAttack PanFish Pro Camera Mount
- From locked mode, simply squeeze a lever to go into adjustment mode.
- In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you back in locked mode.
- To go to removal mode, flip the lever out, and the system easily slides off of the track mount.
The ultra-durable aluminum construction of the PanFish Pro™ is not only super lightweight - it's also incredibly rigid, reducing shake in your camera footage.In addition, the patented design allows for one-hand rotation without loosening or tightening the product, giving you the ability to get the smoothest pan shot.
Utilizes the LockNLoad™ Track Mount System for easy on and off, angled articulation, and rotational pivoting
Durable, lightweight, and super rigid aluminum construction
Features the new YakAttack Camera Ball
It floats!
For use with camera utilizing a 1/4-20 mount or GoPro Cameras
33" Tall
YakAttack ParkNPole 7'8"
- Foot for paddling
- Tip for staking into the ground
- 7' 8" long
- .845'' Diameter Tubing
- Made in the USA
- Covered by our Built for Life Guarantee
- SKU: PNP78
YakAttack ParkNPole Link 8'
The ParkNPole Link™ is a smarter, two-piece version of the popular 8' ParkNPole™. The two-piece construction makes transportation easy to and from the water or makes it possible to store inside the hull of your fishing kayak. For a longer option purchase the 46'' extension making the total length 12'. At 12 feet, the ParkNPole Link™ plus the extension, make for a great push pole and also helps when anchoring in deeper water. Made from specially formed fiberglass and UV stabilized, wear resistant nylon. At 1.8 lbs, it is incredibly lightweight and extremely durable.
- 8' long
- .845'' Diameter Tubing
- Purchase the 46" extension for an extended length of 12'
- Wear-resistant nylon tip and foot with a fiberglass body
- Weights only 1.8 lbs, yet is extremely durable.
- The two-piece construction allows for easy transportation and storage.
- Made in the USA
- Covered by our Built for Life Guarantee
- SKU: PNPL-8
YakAttack ParkNPole RotoGrip
To secure your ParkNPole off the side of your kayak, the ParkNPole RotoGrip pairs nicely with a set of SideArm Track Mounts or the DoubleHeader Track Mount. Compatible with YakAttack MightyMount’s, GearTrac, and most other factory installed kayak track systems and aftermarket track from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack and a six pack.
- Utilizes the Mighty Bolt to attach to kayak track
- 2.4" tall
- GearTrac not included
- Single pack
- Patent Pending
- Made in the USA
- Covered by our Built for Life Guarantee
- SKU: GRP-1004
YakAttack Rectangular Fish Finder Mount with Track Mounted LockNLoad Mounting System
YakAttack RotoGrip Paddle Holder
Voted Product of the Year for Yak Angler's Kayak Anglers Choice Awards for 2016.
The YakAttack RotoGrip™ Paddle Holder sheds a new light on the age old problem of paddle management. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). Kayak and SUP anglers have lots of options for installing and configuring this handy little gadget. Super low profile at 2.25" tall, the RotoGrip™ Paddle Holder grips the paddle shaft between two soft rollers, securing your paddle quietly and with just the right amount of tension. Sold in single packs.
- Utilizes the Mighty Bolt to attach to kayak track
- 2.25" tall
- GearTrac not included
- Single pack
- Patent Pending
- Made in the USA
- Covered by our Built for Life Guarantee
- SKU: GRP-1001
YakAttack RotoGrip Phone Holder with LockNLoad Mounting System
The YakAttack RotoGrip Phone Holder Pro is exactly the phone holder you would expect from YakAttack. Its revolutionary design is unlike anything that exists on the market and utilizes our popular RotoGrip technology allowing for quick one-handed operation. The phone holder features two adjustable rubber wheels that securely holds most modern-day smartphones and the width settings can easily be adjusted. Compatible with smartphones ranging from: 2.75” to 3.625” wide, 0.303” to 0.625” in thickness.
This version of the RotoGrip Phone Holder includes a Universal Smartphone Harness and Tether, LockNLoad Mounting System, and a 5” extension arm for limitless adjustments. The LockNLoad Mounting System is compatible with all YakAttack GearTrac, MightyMounts, and most other factory installed kayak track systems.
Built into the phone holder is our 1” ball system that allows for easy articulation to achieve a wide variety of positions. The 1” ball mount on the back of the phone holder is also used to adjust the width of the frame and retention wheels. Pulling against the ball releases the spring-loaded gear and allows you to twist clockwise or counter-clockwise to adjust the width to your phone. To find the correct position for your phone, adjust the arms so that your phone is securely held in place. Your phone should roll firmly into place with one-handed operation when the settings are correct.
The included Universal Smartphone Harness and Tether features a flexible and grippy silicone interface, this harness accommodates devices with or without a case, ensuring that your phone is snugly held in place. Included with the harness is a coiled coated steel tether (9" coiled, 48" fully stretched) with locking carabiner. The carabiner is designed to attach to the tether point found on the frame of the phone holder giving you extra peace of mind that you phone is safe and sound. Engineered for ease of use, the harness allows for effortless access to your phone’s functions and is designed to not interfere or block the camera lens.
The YakAttack RotoGrip Phone Holder is built from UV-resistant, high-quality, injection-molded polymers and assembled with stainless steel hardware. Designed to withstand years of use in harsh outdoor and marine environments, the RotoGrip Phone Holder is backed by our Built for Life Guarantee. This phone holder is designed to securely hold your smartphone while on the water. However, we are not liable for any loss, damage, or malfunction of your device during use. It is essential to use the included harness and tether and ensure your phone is properly secured. Use at your own risk.
WARNING: This product contains a chemical known to the State of California to cause cancer. This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
- Known combability: (iPhone 15 Pro Max, iPhone 14/15, Galaxy S24 Ultra, Galaxy A15, Google Pixel 7/7A, Google Pixel 8/8A/Pro, and more)
- Compatible with smartphones ranging from: 2.75” to 3.625” wide, 0.303” to 0.625” in thickness
- The max height of the mount is 10.5”
- Phone holder is backed by our Built for Life Guarantee
- Harness, tether, and carabiner have a 1-year warranty
- Phone holder is made in the USA
- Harness and tether are made in China
- SKU: CMS-1006
- UPC: 819731017047
YakAttack Rotogrip SnapNStrap 2 Pack
The SnapNStrap Security Tether was specifically designed for the YakAttack RotoGrip Paddle Holder; RotoGrip not included. It acts as a simple hook and loop system using bungee to add extra security and peace of mind knowing your paddle is safe and secure. To attach the SnapNStrap system, simply remove the rubber washer and MightyBolt from your RotoGrip and slide on the molded frame with the two tabs facing upwards. Apply a little pressure, and the system will snap in place. From there, reassemble the washer and MightyBolt. To secure your paddle, wrap the bungee and pull tab over the shaft of your paddle and loop it over the tab of the SnapNStrap frame.
- RotoGrip not included
- Tool-less attachment
- Compatible with the RotoGrip Paddle Holder
- Sold as a 2 pack
- Made in the USA
- Lifetime Warranty
YakAttack Round Base Fish Finder Mount with Track Mounted LockNLoad Mounting System
YakAttack SideArm Track Mount
Included with the SideArm Track Mount are two different Track Disk. These two Track Disks are designed to provide a snug fit in either the standard YakAttack GearTrac (GT90, GTSL90, GT175, MightyMount XL) or the wider opening of the YakAttack Top Loading family of GearTrac (GTTL90 and GTTL175). If a track system was included with your kayak, try both of them and determine which one will provide the best fit. Only one Track Disk is needed on the underside of the SideArm for the mount to work as designed. In addition, the Track Disks allow for the SideArm to be mounted in any direction in relation to the track or MightyMount it is attached to. For example, you can set up the SideArm directly off the side of your kayak for a paddle holder solution or having it facing inwards and virtually 360º anywhere in between.
Compatible with YakAttack MightyMount’s, GearTrac, and most other factory installed kayak track systems and aftermarket track from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack and a six pack.
The SideArm Track Mount is made in the USA from marine grade polymers and is backed by our Built for Life Guarantee.
- Made in the USA
- Built for Life Guarantee
- Single point of attachment
- LockNLoad Compatible
- Includes two sizes of Track Disks
- The SideArm Track Mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory installed kayak track.
- SKU: TMA-1003
YakAttack SideWinder Anchor Line Reel, Includes Track Hardware and 75 Feet of 550 Paracord
Includes hardware for install onto your kayak's track system
Includes 75 feet of 550 paracord
14"x6.38"x0.75"
Geartrac not included
YakAttack Snagless Slotted Padeye - 6 pack
The commonly used padeye design is a thing of the past and was never truly intended to be used on a kayak in the first place. Our Snagless Slotted Padeyes were designed from the ground up with paddle sports and kayak fishing in the forefront of our design process. The low profile, contoured design of the Snagless Slotted Padeye looks great and has no snag points. The slotted design accommodates popular padeye hole patterns of 1-3/8" and 1-1/16". Unlike the original padeye which sits very high and is prone to break the low profile geometry and material makes for a more kayak friendly design. Easily attaches with the included stainless self-threading screws.
- Sold in a 6 pack
- Includes #10 stainless steel self-threading screws
- Made in the USA
- Covered by our Built for Life Guarantee
- SKU: YEP-1002
YakAttack Surface Mount Retractor
- Made from UV Resistant High Density Polyethylene
- 36" Kevlar Cord
- Removable 4" tether
- Made in the USA
- Covered by our Built for Life Guarantee
- SKU: RET-1001
YakAttack SwitchBlade Transducer Deployment Arm
Unlike other transducer deployment arms of the past the new SwitchBlade Transducer Arm from YakAttack is focused on speed and adjustability. Featuring a hydrodynamic blade design the SwitchBlade causes less water turbulence resulting in a faster and less noisy over-the-side transducer mounting solution. Whether the SwitchBlade Transducer Arm is mounted on top of a YakAttack CellBlok or on the gunwale of your kayak the depth of the transducer is easily adjustable and gives you the ability to get the transducer deep enough for your side scan fish finder. If you don't need the full length of the SwitchBlade simple remove the middle arm and now you have a customized solution. To deploy or retrieve the transducer arm the SwitchBlade features a unique tubular design and multi pivot allowing for easy articulation in and out of the water.
Can be attached to YakAttack GearTrac and most other kayak track systems
Includes hardware for deck mounting or attachment to the YakAttack CellBlok
Lowrance fish finder, transducer, GearTrac, and LockNLoad Mounting System not included
YakAttack Tie-Down Eyelets 2 pack
- Patent Pending
- 2 Pack
- Made of stainless steel
- Compatible with GearTrac, MightyMounts, and most other factory-installed track systems
- Made in the USA
- Covered by our Built for Life Guarantee
- SKU: AAP-1016
YakAttack Track Mounted Retractor
- UV Resistant High Density Polyethylene
- 36" Kevlar Cord
- Removable 4" tether
YakAttack Track Nut Kit, 6pk
- Pack of 6 track nuts
- Made in the USA
- Covered by our Built for Life Guarantee
- SKU: TN-1420-6
YakAttack Universal Mounting Plate
Mounting plate is 6" x 3.5"
YakAttack Vertical Tie Downs Track Mount 2 pack
YakAttack Zooka II Rod Holder with Track Mounted LockNLoad Mounting System
There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use:
- From locked mode, simply squeeze a lever to go into adjustment mode.
- In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you are back in locked mode.
- To go to removal mode, flip the lever out, and the system easily slides off of the track mount.