
Thanks for registering your Kayak!
Now that you have registered your kayak, let us help you create the best experience on the water
Accessories
Adapter Kit Slugs for Groove 1/4-20
The Groove Adapter Slugs Kit allows almost any gear to be mounted on the Versa Board Groove Kit mounting system
Aluminum Rail Set (2), 20" Curved SP10, includes hardware
More rails, more accessories. Fits: Slayer Propel 10, Slayer Propel 13, Ultimate FX 12, Ultimate FX 15, Ultimate 12, Ultimate 14.5, Slayer 12 (non propel), and Slayer 14.5 (non propel)
Aluminum Rail Set (2), 20" Curved SP10, includes hardware
More rails, more accessories. Fits: Slayer Propel 10, Slayer Propel 13, Ultimate FX 12, Ultimate FX 15, Ultimate 12, Ultimate 14.5, Slayer 12 (non propel), and Slayer 14.5 (non propel)
Anchor Wizard 6LB Radius Anchor
This is Anchor wizards Radius anchor. This anchor was developed to fit securely in our chute and work in any type of waters.
Anchor Wizard Low Profile
Here is the Low profile Kayak Anchor Wizard! This is the original kayak anchor wizards little brother; made of light weight plastic and strong bearings the Low profile Kayak Anchor Wizard makes a great accessories to any Kayak. Windy days, or strong current the kayak anchor wizard will hold strong. Check it out on all our social media and make sure to become part of the Anchor Wizard Family! All our Products are proudly made in the USA!
Specs:
- Base is 5.5"X 4.25"
- Works in fresh and salt water
- Cranks up to 10lbs
Includes:
- 45ft of 1/8" Rope
- Mounting Supplies for track mounting and permanent mounting
- 1 LP Kayak Anchor Wizard
- 1 Kayak Anchor Chute
Anchor Wizard Native Titan Bow Mount
New mount! This mount was designed for the Native Titian front handle. No need to drill holes this mount will fit right on the front handle of your boat.
Easy install! Just unscrew the two bolts holding your handle on and then place this bracket in between the handle and your boat and done.
Specs:
- Made from 6061 Aluminum
- Retro fits right to the front of a Native Titian
- No drilling required
- Mounting Hardware supplied
Anchor Wizard Triangle Mounting Plate
This Triangle mounting plate makes it simple to mount the kayak anchor chute to your kayak. Working around a rudder can be difficult, and this mount can be mounted to a track or permanently down to your kayak.
Includes:
- Triangle Mounting Plate
- Dimensions: 10 5/8" x 11 7/8" x 5 3/4"
- Thickness: 1/4"
- Made from 6061 Alum.
Angled Footbrace Set
These upgraded footbraces give more pad for your foot to cover, allowing for improved steering and comfort.
Astral V-Eight Fisher PFD
- Airescape airflow system eliminates excessive heat to help you maintain a comfortable core temp
- Large pocket for phone and essentials
- External pocket for your folding knife (not included)
- Pliers holster and clipping points for tackle, such as line nips and retractors
- High mesh back with light lashing point
Best Use |
Fishing |
---|---|
Flotation |
16 pounds |
USCG Classification |
Type III |
Material(s) |
400- and 200-denier CORDURA nylon/polyester mesh/EVA and polyethylene foam |
Fishing Features |
Yes |
Lash Tab |
Yes |
Fits Chest |
L/XL: 45-51 inches M/L: 38-44 inches S/M: 31-37 inches |
Weight |
1 lb. 5.9 oz. |
Gender |
Unisex |
Astral V-Eight Fisher PFD
- Airescape airflow system eliminates excessive heat to help you maintain a comfortable core temp
- Large pocket for phone and essentials
- External pocket for your folding knife (not included)
- Pliers holster and clipping points for tackle, such as line nips and retractors
- High mesh back with light lashing point
Best Use |
Fishing |
---|---|
Flotation |
16 pounds |
USCG Classification |
Type III |
Material(s) |
400- and 200-denier CORDURA nylon/polyester mesh/EVA and polyethylene foam |
Fishing Features |
Yes |
Lash Tab |
Yes |
Fits Chest |
L/XL: 45-51 inches M/L: 38-44 inches S/M: 31-37 inches |
Weight |
1 lb. 5.9 oz. |
Gender |
Unisex |
Back Pack, Behind Seat
The First Class Seat Pack contours perfectly to the seat frame offering multiple easily accessible storage options. The front has two mesh pockets, the vertical zipper along the side makes it easy to get inside the main pocket without turning around, and the large back pocket is an excellent location for a hydration bladder or other items you want to keep on hand. SKU: APAC001
Battery Tote, Interior Mesh Sack
SKU: ABAT001
Battery Tote, Interior Mesh Sack
SKU: ABAT001
Bending Branches Angler Pro Versa-Lok™ Paddle
The kayak fishing paddle even professionals dream about.
- The 6x winner of ‘Angler Paddle of the Year’ award as voted by consumers in the YakAngler awards, marking it the best paddle in fishing.
- Blade patterns designed and selected by Bending Branches' ProStaff and Ambassador teams
- The Angler Pro is commonly used by Bending Branches team members and competitive anglers for the optimal combination of weight savings and performance for the dollar.
- Compression molded fiberglass blades are renowned for their weight and longevity. Fiberglass composite blades lay-up save many ounces in a paddle, resulting in an easy paddling stroke and less fatigue at the end of the day. The cross dimensional fiber weave mean the blades have a slightly amount of flex and forgiveness to them, so they may wear but tend to hold up well over the long-haul.
- The blades shape design is renowned for offering a silky-smooth forward stroke with zero tolerance for fluttering, preserving your energy for longer paddling trips.
- 105 sq. inch blade it the ideal size for horsepower and control with the heavily loaded fishing kayaks. It’s slightly bigger than some fishing paddles, but the larger size means it can handle trickier conditions and more weight.
- 100% carbon shaft is the lightest material available, so paddling is less fatiguing and more enjoyable on longer trips. The carbon weave is tight and secure, making it one of the strongest options available.
- The shaft is ovalized where the hands go for more comfort and control, and to limit the chances for blisters.
- Versa-Lok™ offers 15cm of additional length and infinite feathering options, and does so with an easy to use and understand system that is secure (no disengagement), robust (will hold form for a very long time), and resistant to corrosion (nylon plastic and stainless steel parts).
- Versa-Lok™ offers longer sizes than the previous generation of paddles, making it ideal for wider or bigger kayaks and the high seat position.
- The Versa-Lok™ clamping system is backed by structural and cyclical testing, plus a decade of on-water use.
- Carbon ferrule insert is light, tight, and right for the long haul. This is a sizable upgrade over plastic or glass ferrule inserts.
- 40-inch tape measure on shaft is a sizing guide, allowing you to verify catches on the spot
- Proudly hand built in Osceola, Wisconsin, USA, by a team of paddlers and outdoor enthusiasts.
Shaft Material: 100% Carbon
Blade Material: Compression Molded Fiberglass
Blade Size: 7.25” x 18” (105 sq. in.) (677.4 sq. cm)
Weight: 30 oz. (850 g)
Ferrule Angles: Infinite
Bending Branches Angler Pro Versa-Lok™ Paddle
The kayak fishing paddle even professionals dream about.
- The 6x winner of ‘Angler Paddle of the Year’ award as voted by consumers in the YakAngler awards, marking it the best paddle in fishing.
- Blade patterns designed and selected by Bending Branches' ProStaff and Ambassador teams
- The Angler Pro is commonly used by Bending Branches team members and competitive anglers for the optimal combination of weight savings and performance for the dollar.
- Compression molded fiberglass blades are renowned for their weight and longevity. Fiberglass composite blades lay-up save many ounces in a paddle, resulting in an easy paddling stroke and less fatigue at the end of the day. The cross dimensional fiber weave mean the blades have a slightly amount of flex and forgiveness to them, so they may wear but tend to hold up well over the long-haul.
- The blades shape design is renowned for offering a silky-smooth forward stroke with zero tolerance for fluttering, preserving your energy for longer paddling trips.
- 105 sq. inch blade it the ideal size for horsepower and control with the heavily loaded fishing kayaks. It’s slightly bigger than some fishing paddles, but the larger size means it can handle trickier conditions and more weight.
- 100% carbon shaft is the lightest material available, so paddling is less fatiguing and more enjoyable on longer trips. The carbon weave is tight and secure, making it one of the strongest options available.
- The shaft is ovalized where the hands go for more comfort and control, and to limit the chances for blisters.
- Versa-Lok™ offers 15cm of additional length and infinite feathering options, and does so with an easy to use and understand system that is secure (no disengagement), robust (will hold form for a very long time), and resistant to corrosion (nylon plastic and stainless steel parts).
- Versa-Lok™ offers longer sizes than the previous generation of paddles, making it ideal for wider or bigger kayaks and the high seat position.
- The Versa-Lok™ clamping system is backed by structural and cyclical testing, plus a decade of on-water use.
- Carbon ferrule insert is light, tight, and right for the long haul. This is a sizable upgrade over plastic or glass ferrule inserts.
- 40-inch tape measure on shaft is a sizing guide, allowing you to verify catches on the spot
- Proudly hand built in Osceola, Wisconsin, USA, by a team of paddlers and outdoor enthusiasts.
Shaft Material: 100% Carbon
Blade Material: Compression Molded Fiberglass
Blade Size: 7.25” x 18” (105 sq. in.) (677.4 sq. cm)
Weight: 30 oz. (850 g)
Ferrule Angles: Infinite
BerleyPro Bumper Bro Keel Guard
The Bumper Bro is a kayak keel guard that is designed to be mounted to the front of your kayak to avoid damaging it with deep gouges or scratches when landing and launching.
The kayak keel guard is made from thermoformed ABS plastic. We recommend installing it with marine goop or another adhesive that will not degrade the kayak material over time. These can also be attached with 3m VHT tape but we recommend putting an adhesive around the edges to ensure the part can’t have sand or debris find its way down. The part is formed with large sides to give the part a good area for bonding and holding onto your kayak.
This does not come with the adhesive or tape to attach to your kayak as you can choose how you attach it.
BerleyPro Garmin Visor
The Garmin Series Visors are the only shade on the market specifically designed to fit your fishfinder/chartplotter range. They are light-weight, strong, sturdy, and super easy to install on your unit for maximum benefits.
The visors provide added protection from the elements such as rain, waves, and glare. By reducing the amount of water on the screen you can spend less time cleaning it and more time fishing! It will also improve your touch screen usage and protect your card slots.
By reducing glare it makes the screen more visible so you can see the fish or contours you are following. Reduce the brightness to save battery life and reduce the temperature of your unit; improving its running performance and avoiding shutdowns.
Night-time boating is also improved by shielding your windscreen from the lights of the unit, making it much safer to commute at night.
EASY INSTALLATION ON FLUSH MOUNT OR GIMBAL MOUNT
The visors work with both mounts as they are CNC machined to fit the outside flange of your unit. This allows them to be mounted, with the nuts and screws provided, directly to the unit or through the holes into the dash/backing.
BerleyPro Lowrance Visor
The Lowrance Hook/Elite Series Visors are the only shade on the market specifically designed to fit your Hook/Elite series Fishfinder/Chartplotter range. They are light-weight, strong, sturdy, and super easy to install on your unit for maximum benefits.
The visors provide added protection from the elements such as rain, waves, and glare. By reducing the amount of water on the screen you can spend less time cleaning it and more time fishing! It will also improve your touch screen usage and protect your card slots.
By reducing glare it makes the screen more visible so you can see the fish or contours you are following. Reduce the brightness to save battery life and reduce the temperature of your unit; improving its running performance and avoiding shutdowns.
Night-time boating is also improved by shielding your windscreen from the lights of the unit, making it much safer to commute at night.
BerleyPro Native Watercraft Propel Service Kit
This spanner wrench is designed to fit the upper and lower cartridge’s on the Native Watercraft Propel series. This allows you to maintain and service your drive unit to keep it reliable on the water.
This kit provides the tools required to remove the peddles and upper and lower housings of your propel drive. This contains a custom 8mm steel spanner with tool steel ends, TIG welded to give you the strength required in dissembling the components for service. The spanner has been Electrolysis-coated to resist corrosion. This also contains a peddle puller to allow you to remove the pedals to get to the upper housings.
*NOTE – This service kit only fits Propel drives with the curved upper housings as shown in photos*
BerleyPro Native Watercraft T Lock Steering
The new T-Lock Steering is the newest version of our most trusted steering upgrades for Native Watercraft kayaks with a new single piece, zero play rear drum design.
This kit is the ultimate in complete steering installations for the Native Watercraft range. We took our old trusted steering conversion that has been used and trusted by thousands of anglers around the world and improved it! The things we wanted to remove was having to drill into the original steering plate, the separate tension plate on the top, smooth finish over the top, added a hole for retractable rudders pull cords, and designed a unique T-Locking system for the rudder shafts to ensure there is zero play from the shaft to the rudder and removes the single reliance on the top screw to hold the rudder in place.
This kit comes with the following:
- Handle drum with top and bottom routing to let the cord pass over itself
- Spectra Cord with a core treated and polyester jacket for high strength and minimal strength spectra cord. 295kg/650lb breaking strength
- Tension cover with twin cord locking inserts so you can lock the cord down and be sure it won’t pull out
- Single Piece T-Lock Rudder Drum Housing
- Anodized Aluminium T-Locking
- Stainless Steel Fasteners
- Pull through braid
BerleyPro Native Watercraft Upgraded Handle
The ultimate aluminum handle upgrade and bush combo for your Native Watercraft kayak. This has adjustable tension for tracking from the top as well as a CNC machined bush to remove the slop from your steering.
We’ve designed this handle to not only upgrade the strength and raise the steering for easy access but to also include a CNC machined bush to reduce the play and support the shaft when turning.
This bush and handle combo is machined from Billet aluminum and plastic with high precision to allow both parts to move smoothly and have no sloppy feel. We’ve stayed away from bearings or any other component that is vulnerable to the elements and come up with this plastic/aluminum combo.
Check out how easy the installation can be done with a Phillips head screwdriver here
Designed to fit both the BerleyPro Steering Upgrade Pulley and also the Standard Native Watercraft Pulley plus other brands.
PLEASE NOTE THAT THE SLAYER MAX 10/12.5 is for 2022 and later models.
CNC machined in Australia
BerleyPro Steering Knob
Get the best grip on your handle shaft with our new CNC machined steering knobs.
Want to make your steering handle even better? We’ve machined this knob and bush to fit on the front of your handle and give you a nice long, rotating grip for when you are using your steering.
Made from CNC machined plastic and stainless steel fasteners in Australia
Bow Mount, Titans, Slayer Max 12.5, Slayer Propel 10
There are 3 accessory patterns that come pre-drilled (Micro Power Pole, Motorguide quick release bracket, and the Motorguide 6 bolt pattern). All stainless steel hardware is included to mount the plate to the kayak. This mount fits the Titans and the Slayer Propel Max 12.5. *Note: The install requires holes to be drilled into the kayak and does not void the Hull Warranty.
Bright LED Button Light Kit
SUMMARY
- Easily add LEDs to your kayak with our patent-pending through hull 12-volt connectors and plug-and-play wiring
- Super Bright LEDs
- 12ft. jacketed cable with waterproof connector
- Anodized aluminum, self-tapping, self-sealing and waterproof through hull housing
- No cutting or splicing required
DETAIL
Why cut and splice when you can just plug-and-play? Yak-Power has completely revolutionized LED lighting for kayaks with our patent-pending through hull 12-volt connectors and plug-and-play wiring. Adding LED lights to your kayak has never been easier! Simply drill a hole, screw in the self-tapping button light, plug them in and power them up. No wires to cut or splice, no caulking, and most importantly, no leaks.
Our LED Button Lights have Super Bright LEDs that are fully encapsulated into a 5/8” socket head housing with a 12ft. jacketed cable and waterproof connector. It’s complete with plug-and-play SAE connectors for easy integration into any Yak-Power system.
Note: Always make sure the Yak-Power plug-and-play connectors are completely pushed together when connecting the system. We use our own custom tooled, high tolerance, very snug fitting SAE connectors with larger gauge, real copper wire to ensure a quality, weatherproof and reliable connection. All Yak-Power plug-and-play accessories are designed specifically to work together while maintaining the correct battery polarity throughout the entire YP system. Using other aftermarket connectors or splicing other connectors into our system may cause damage to the system or the accessories connected to the system. This voids your warranty.
Make sure to pay attention to the wire colors of all YP accessory cables to ensure that the red (+) wire is always connecting to the red (+) wire on the connector into which it’s being plugged.
- Product Weight 1 lb
- Drill Hole Size 9 mm
- Current Draw 0.1 amps per Led
Cam-Lok Paddle Holder Set Assembly
Complete LED light Kit
SUMMARY
- Easily add LED lights to your kayak
- Completely encapsulated, compression molded, silicone encased LED light strips with Super Bright LEDs
- Patent-pending, stainless steel, self-sealing, waterproof through hull connectors
- No cutting or splicing required
DETAILS
Complete 4-Piece LED Light Kit - Blue OR Green
Why cut and splice when you can just plug-and-play? Yak-Power has completely revolutionized LED lighting for kayaks. Using our patent pending Through Hull 12v connectors and Yak-Power plug-and-play wiring, adding LED lights to your kayak has never been easier. Simply drill a hole, screw in the Through Hull connector, plug them in, and power them up! No wires to cut, no splicing, no caulking, and most importantly no LEAKS!
All Yak-Power LED lights are designed for maximum performance, ease of installation, and reliability. Our LED light strips feature Super Bright LEDS that are fully encapsulated, and compression molded with a silicone encased connector plug that plugs directly into our Through Hull connector. All wiring is complete with Yak-Power plug-and-play SAE connectors for easy integration into any Yak-Power system.
BLUE is better for night vision and is commonly used for interior lighting and exterior lighting when attracting bait is not a priority.
Patent Pending
Always make sure the Yak Power plug-and-play connectors are completely pushed together when connecting the system together.
All SAE connectors are not exactly alike. Yak Power uses our own custom tooled, high tolerance, very snug fitting connectors with larger gauge real copper wire to insure a quality, weatherproof, and reliable connection.
All Yak-Power plug and play accessories are specifically designed to work together while maintaining the correct battery polarity throughout the entire Yak-Power system. Use of other aftermarket connectors or splicing other connectors into the Yak-Power system may cause damage to the system or to the accessories connected to the system and void your warranty.
CAUTION: Always pay attention to the actual wire colors of all Yak-Power accessory cables to insure that the RED (+) wire is always connecting to the RED (+) wire on the connector into which it is being plugged.
- Product Weight 1.5 lbs.
- Drill Hole Size 1/2 in.
- Current Draw .3 amps per 10" LED strip / 0.55 amps per 20" LED strip
- MPN YP-LEDK-B4
Crank Seal Replacement Kit
SKU: APRO008
Dakota Lithium 12V 100Ah
Built Dakota tough, this 12 volt lithium battery packs a big punch. Engineered with Lithium Iron Phosphate (LiFePO4) technology this battery has twice the power, half the weight, and lasts 4 times longer than a sealed lead acid battery – providing exceptional lifetime value. 100 Amp hours of capacity provides a full day of power for high amp draw trolling motors or for long days on the open road in your RV. Ideal for deep cycle applications like trolling motors, solar energy storage, or boating, where you need lots of power for a long time. Same performance as our legendary 10 Ah battery, but with 1,000% more capacity. All backed up by a best in class 11 year warranty. LiFePO4 charger included.
Dakota Lithium 12V 23Ah USB Battery
Dakota Lithium has optimized this charger for use with our lithium iron phosphate batteries (LiFePO4). All 12 volt Dakota Lithium batteries should be charged using a LiFePO4 compatible charger like this one. SLA chargers will reduce the performance and lifespan of the battery. This charger charges at a speed of 3 amps an hour and is optimal for batteries < 25Ah. For batteries greater than 25Ah like the 54Ah or 100Ah battery we recommend the 10 amp charger.
FRABILL - Bearclaw Kayak Fishing Net
Kayakers, paddle boarders and anyone fishing with one hand free can now achieve powerful catches with the Trophy Haul™ Bearclaw Night. Simply wrap the support bar around the forearm and grab the handle right at the yoke for easy one-handed operation. The conservation netting and asymmetrical design protect fish as they smoothly slide into the flat bottom.
- HANDLE LENGTH: 18"
- HANDLE TYPE: BEARCLAW
- HOOP SHAPE: MESHGUARD™
- HOOP SIZE: 14" X 18"
- SIMPLE HANDLE TYPE: FIXED
- SIMPLE NETTING TYPE: COATED
- YOKE: TROPHY HAUL
FX Anchor Trolley System- Floating Pulley
SKU: AANT001
GridLoc MightyMount
The GridLoc MightyMount is a low profile, highly versatile mount with a small footprint designed to accommodate track-mounted accessories utilizing a single attachment point. The hole pattern featured on this mount was specifically designed for use with the GridLoc Mounting Platform found on the YakAttack BlackPak Pro, but it can also be attached to rotomolded or thermoformed watercrafts. The GridLoc MightyMount is sold with and without the 90º adapter.
- Footprint: 2.13” x 2.13”
- Hole Pattern: 1.5” x 1.5”
- Compatible with YakAttack track mounted accessories that use a single point of attachment
- New hole pattern designed around the GridLoc Mounting Platform found on the BlackPak Pro
- Hardware included is intended for installations on the BlackPak Pro or rotomolded and thermoformed watercrafts
- Phillips screwdriver required for installation on BlackPak Pro
- Includes #10 stainless steel self-threading screws
- 1/8” drill bit needed for surface mounted installs on kayaks
- Built for use in harsh marine conditions
- Made in the USA
- Built for Life Guarantee
- US Patent #9863576
- SKU: MMGL-1001
GridLoc MightyMount w/90 Degree Adapter
The GridLoc MightyMount is a low profile, highly versatile mount with a small footprint designed to accommodate track-mounted accessories utilizing a single attachment point. The hole pattern featured on this mount was specifically designed for use with the GridLoc Mounting Platform found on the YakAttack BlackPak Pro, but it can also be attached to rotomolded or thermoformed watercrafts.
The GridLoc MightyMount with 90 Degree Adapter is the perfect mount for anglers to attach their VISICarbon Pro, PanFish Pro Camera Mount, or other track-mounted YakAttack accessories to the BlackPak Pro. For camera mounts and visibility flags/LED, this mount helps increase the overall effective height of the flag/LED or camera angle, helping you capture that unique overhead camera shot or increased visibility of your flag/LED while offshore or in areas with tall grass. The addition of the 90 Degree Adapter puts LockNLoad accessories like camera mounts and rod holders in the vertical orientation, helping maximize the true adjustability that is built into the LockNLoad system. The GridLoc MightyMount is sold with and without the 90º adapter.
- Footprint: 2.13” x 2.13”
- Hole Pattern: 1.5” x 1.5”
- Compatible with YakAttack track mounted accessories that use a single point of attachment
- New hole pattern designed around the GridLoc Mounting Platform found on the BlackPak Pro
- Hardware included is intended for installations on the BlackPak Pro or rotomolded and thermoformed watercrafts
- Phillips screwdriver required for installation on BlackPak Pro
- Includes #10 stainless steel self-threading screws
- 1/8” drill bit needed for surface mounted installs on kayaks
- Built for use in harsh marine conditions
- Made in the USA
- Built for Life Guarantee
- US Patent #9863576
- SKU: MMGL-1001
GridLoc MightyMount XL
The GridLoc MightyMount XL was designed as a robust but economical mount for longer footprint areas. Compatible with all YakAttack track-mounted accessories, this injection molded mount functions similar to a GearTrac, and allows t-bolt accessories to be installed from either end. A simple twist allows quick and easy position adjustment, but a few extra turns are required to remove the accessory, giving the GridLoc MightyMount XL the same gear security features of the original YakAttack MightyMount, with all of the adjustability of our GearTrac. A textured upper surface adds grip while making the GridLoc MightyMount XL one of the best-looking accessory mounts on the market. For LockNLoad accessories like the popular Omega or Zooka II Rod Holder, cutouts on the outer edges of the GridLoc MightyMount XL were added to accommodate the TrackTeeth located on the underside of the LockNLoad track mounts to prevent attachments from sliding along the track, adding even more security.
The GridLoc MightyMount XL was designed around the GridLoc Mounting platform featured on the BlackPak Pro and replaces the MightyMount XL. The overall lengths will be the same as the original MightyMount XL; 6”, 9”, 12”, but the hole pattern has been updated and is different. The hole spacing on the GridLoc MightyMount XL is 1.5” x 1.5”. A Phillips screwdriver and the included stainless steel screws are required for the installation on the BlackPak Pro. For installations on rotomolded and thermoformed kayaks a 1/8” drill bit will also be needed.
- New hole pattern designed around the GridLoc Mounting Platform found on the BlackPak Pro
- Includes #10 stainless steel self-threading screws
- Hardware included is intended for installations on the BlackPak Pro or rotomolded and thermoformed watercrafts
- Phillips screwdriver required for installation on BlackPak Pro
- 1/8” drill bit needed for surface mounted installs on kayaks
- Built for use in harsh marine conditions
- Made in the USA
- Built for Life Guarantee
- US Patent #9863576
Grundens Gear Hauler Tote Bag
The Gear Hauler 50L tote is ready for day trips, long weekends, and full-on expeditions. Built to be durable, rugged, and functional, this bag should be the never-go-fishing-without-it bag. It can handle dirty, wet grimy fishing gear and it features a dry section to keep electronics and other valuables safe.
- Water Resistant Sewn Construction
- Single side coated fabric
- Zippered Secure Storage Pocket
- External Tie Down Anchor Points
SKU 70107-607-0001
Grundens Shoreman Tote Bag
At Grundéns finding ways to activate sustainable practices is a continued priority for our brand and we’re proud to introduce our new Shoreman Tote Bag, constructed from PVC/PU blend material that has been upcycled from the cutting scraps of our Shoreman Bib production. Not only is this a cool, stylish tote that ties back to our roots, but it also avoids any unnecessary landfill contributions.
- Made from upcycled scrap PVC/PU material
- Water Resistant Sewn Construction
- Double Side Coated Shoreman Fabric
- External Storage Pocket
- Internal Zippered Secure Pocket
- Grundéns Branded Webbing Straps
Hatch Cover, Modified Slayer Groove Access
SKU: AHAT123
Hatch Cover, Slayer 12, UT FX 13, and Slayer 13 Propel Bow
The Slayer 12/Slayer 13 Propel Hatch covers the bow storage area, shedding spray and rain. Secured in place by the cross pattern bungee system. It is made of rigid plastic that will not sag.
SKU: AHAT001
Hatch Cover, Slayer 12, UT FX 13, and Slayer 13 Propel Bow
The Slayer 12/Slayer 13 Propel Hatch covers the bow storage area, shedding spray and rain. Secured in place by the cross pattern bungee system. It is made of rigid plastic that will not sag.
SKU: AHAT001
Hatch Seal Kit, Slayer Propel Max 12.5 - 1" x 1" x 6'
Gasket seal kit for Slayer Max Bow Hatch. Expanding seal foam is 6 feet in length. This kit does not include the Hatch Cover.
Hi/Low Seat Replacement
Seat Replacement for:
-Native Watercraft Falcon, Slayer 12/14.5, Ultimate FX 12/15
High Frame Seat
Look for your boat model under the size selection.
-ASEA031, the Slayer Propel 10 and 13 is the 2" taller seat, with an upgraded quilted glove.
-PSEA458P, the Hi-Low replaces the Kiawah, Falcon, Slayer 12/14.5, and FX 12/15. This has the standard glove and is seat base (not 2" taller).
-ASEA032, the Slayer Max is the 2" taller seat, with a Tackle Drawer. This does not fit the earlier version with roto molded base.
-ASEA030, this is the original Titan seat. Also for the XC and original version of the Slayer Max 12.5. It sits on the roto molded base.
High Frame Seat
Look for your boat model under the size selection.
-ASEA031, the Slayer Propel 10 and 13 is the 2" taller seat, with an upgraded quilted glove.
-PSEA458P, the Hi-Low replaces the Kiawah, Falcon, Slayer 12/14.5, and FX 12/15. This has the standard glove and is seat base (not 2" taller).
-ASEA032, the Slayer Max is the 2" taller seat, with a Tackle Drawer. This does not fit the earlier version with roto molded base.
-ASEA030, this is the original Titan seat. Also for the XC and original version of the Slayer Max 12.5. It sits on the roto molded base.
Ketch ID
Slides on your Ketch board for easy maneuvering
Adjustable to fight against sunlight
Comes with ID Card holder
Note: Before applying dual loc to clear ID Holder, clean surface for better adhesion
Ketch Keeper
Fits all Ketch Boards
Standard Kit comes with 10-32 3/8” bolts 10-32 t-nuts for t-track X2 each per package.
Krate Kit comes with 10-32 x 1” Nylon lock nuts Washers X4 of each per package.
Stainless Steel Hardware
Kit ProPel Lubrication
- Includes 3.5 oz. of Teflon lubricant, pump with extended nozzle and 3/16" allen key to access fill port
SKU: AKIT001
Kit ProPel Lubrication
- Includes 3.5 oz. of Teflon lubricant, pump with extended nozzle and 3/16" allen key to access fill port
SKU: AKIT001
Kit Replacement Propeller Bullnose 2019
SKU: APRO002
KnotLoc Bungee Dividers for BlackPak (6-Pack)
One of the most significant opportunities for customizing the new BlackPak Pro is found on the inside. When designing the BlackPak Pro and the GridLoc Mounting Platform, we incorporated internal screw bosses for future accessories to customize your BlackPak Pro more effectively from the inside out. The first interior accessory is our KnotLoc Bungee Dividers. This kit includes a total of six bungee dividers creating the ability to secure seven 3700 Plano tackle boxes in the 16x16 BlackPak Pro and is also compatible with all sizes of the BlackPak Pro. The KnotLoc attachment tabs attach using a stainless screw. To attach the bungee dividers, simply tie an overhand knot in the bungee and slide it through the hole in the bungee tab. The knot locks in place on the backside of the attachment tab and can also be removed in seconds, so you can quickly and easily add or remove the bungee dividers depending on your needs for an upcoming fishing trip. Once installed, the bungee tabs can be rotated to the left or right of the mounting location, helping you dial in the exact position of the bungee to accommodate tackle boxes of varying thicknesses better.
- Compatible with all BlackPak Pro sizes
- Includes components for six dividers
- Includes stainless steel hardware
- Phillips screwdriver required for installation
- Built for use in harsh marine conditions
- Made in the USA
- Built for Life Guarantee
- SKU: BLP-AC-0008
Latch kit, Finger Loop Pull Sliders Only 2021- Set of 3
Set of 3 Propel Pedal Drive thwart locking latches, finger loop pull style. Bases and hardware not included.
Lower Transmission Rebuild Kit
Includes Propeller Cartridge, Bearings, Lower Transmission Gear, and O Ring. Increases the efficiency and performance of well-used drives.
SKU: APRO006
MotorGuide Xi3 Quick Release Bracket
Black Composite
Low profile and small footprint is designed to save you space.
Native Kayak Kushion
-Light weight patented technology for more enjoyment
- High quality grade sewing
-Tactical straps with anti slip cam buckles
-Breathable material
-Zipper accessibility
-Non-collapsible & functional
Native Kayak Kushion
-Light weight patented technology for more enjoyment
- High quality grade sewing
-Tactical straps with anti slip cam buckles
-Breathable material
-Zipper accessibility
-Non-collapsible & functional
Native Watercraft Karbonate Board
- Native Watercraft Branded
- Available in 26" and 32" sizes
- KBF Approved
- High color yellow that’s easy to read and extremely durable.
- Built in Cradle
- Compatible with floating kit (coming soon!)
Native Watercraft Kayak Covers
Native Watercraft kayak covers are custom made to fit our kayaks just right. Each cover includes a full set of cover tie down straps (one for each loop set) that can be used to secure the cover when traveling through the sewn in loops on the cover. All covers are made in USA and created with marine-grade anti-wick thread that includes double-stitched construction and 4-ply join seams.
Native Watercraft Ketch X Board
Native Watercraft Branded
Tether holes CNC machined on fence end of the board.
High color contrast that’s easy to read and extremely durable.
Tournament numbers on top of Kradle edge
Ketch Kradle incorporated into board (all one piece)
Widened fence
Native Watercraft Springblade Rudder System

- Easier to turn handle
- Quicker turning
- Great tracking
- Steer the boat in the stowed or deployed position, which helps with steering in shallow water
- Tightened turning radius
- Easy installation
- Better turning performance in rough conditions
- Improved tension lock for steering cables
- Stow and deploy from your seat
- Fits: Slayer Propel 10/13, Titan Propel 10.5/12/13.5
- External Installation
- Installation video
- Fits TitanX 10.5/12.5, Slayer Propel Max 10, NEW FOR 2022 SLAYER PROPEL MAX 12.5, PRE 2022 SLAYER MAX 12.5 (single electronics switch panel MUST BE EXTERNALLY INSTALLED - PLEASE WATCH VIDEO ABOVE FOR THIS INSTALLATION)
- Internal Installation
- Installation Video for the Slayer Propel Max 10
- Installation Video for the NEW FOR 2022 SLAYER PROPEL MAX 12.5 (Dual Electronics Switch Panel)
Native Watercraft Springblade Rudder System

- Easier to turn handle
- Quicker turning
- Great tracking
- Steer the boat in the stowed or deployed position, which helps with steering in shallow water
- Tightened turning radius
- Easy installation
- Better turning performance in rough conditions
- Improved tension lock for steering cables
- Stow and deploy from your seat
- Fits: Slayer Propel 10/13, Titan Propel 10.5/12/13.5
- External Installation
- Installation video
- Fits TitanX 10.5/12.5, Slayer Propel Max 10, NEW FOR 2022 SLAYER PROPEL MAX 12.5, PRE 2022 SLAYER MAX 12.5 (single electronics switch panel MUST BE EXTERNALLY INSTALLED - PLEASE WATCH VIDEO ABOVE FOR THIS INSTALLATION)
- Internal Installation
- Installation Video for the Slayer Propel Max 10
- Installation Video for the NEW FOR 2022 SLAYER PROPEL MAX 12.5 (Dual Electronics Switch Panel)
Native Watercraft Sticker Pack
Native Watercraft Sticker Pack
Native Watercraft Tackle Drawer Kit for 3" High Frame Seat
Upgrade your high frame Native Watercraft seat with this handy tackle drawer. Designed specifically for high-frame seat kayaks with a 3-inch seat base, this innovative accessory kit is a sliding tackle drawer that easily attaches to the seat frame. With its secure mounting system and durable construction, it's the perfect way to keep all of your tackle and loose items within reach, right underneath your seat.
Installation requires riveting three rivets (included) to both the left and right side rail that the drawer slides on.
Here is how to confirm the drawer will fit on your seat? The High Frame Seat has 3" of clearance between the front/ lower support bar and the upper support bar when measured as shown below.
Native Watercraft Tackle Drawer Kit for 3" High Frame Seat
Upgrade your high frame Native Watercraft seat with this handy tackle drawer. Designed specifically for high-frame seat kayaks with a 3-inch seat base, this innovative accessory kit is a sliding tackle drawer that easily attaches to the seat frame. With its secure mounting system and durable construction, it's the perfect way to keep all of your tackle and loose items within reach, right underneath your seat.
Installation requires riveting three rivets (included) to both the left and right side rail that the drawer slides on.
Here is how to confirm the drawer will fit on your seat? The High Frame Seat has 3" of clearance between the front/ lower support bar and the upper support bar when measured as shown below.
NRS Chinook Fishing PFD
The evolution of NRS Chinook Fishing PFD, our best-selling life jacket, depends on our designers listening to the reviews of anglers around the world. And we do. With reconfigured pocket designs, the Chinook makes catching the adventure safer and more effective on the water.
- The Chinook is a Type III, medium profile life jacket delivering 16.5 pounds of flotation.
- Zippered front entry for quick donning and six adjustment points for a customized fit.
- PlushFit™ foam and a high-back design combine to create an extremely comfortable vest for any type of raft or kayak seat.
- A mesh lower-back offers added ventilation on warm days.
- Two large clamshell pockets, sized for tackle boxes, feature updated internal organization based on angler reviews.
- A single, exterior pocket on the angler's right side offers easily accessible storage.
- A fifth, tool holder pocket offers quick access to pliers, line cutters or other fishing gadgets and secures with a hook-and-loop fastener.
- Also features a rod holder, strobe attachment point, reflective accents and knife lash tab.
NRS Chinook Fishing PFD
The evolution of NRS Chinook Fishing PFD, our best-selling life jacket, depends on our designers listening to the reviews of anglers around the world. And we do. With reconfigured pocket designs, the Chinook makes catching the adventure safer and more effective on the water.
- The Chinook is a Type III, medium profile life jacket delivering 16.5 pounds of flotation.
- Zippered front entry for quick donning and six adjustment points for a customized fit.
- PlushFit™ foam and a high-back design combine to create an extremely comfortable vest for any type of raft or kayak seat.
- A mesh lower-back offers added ventilation on warm days.
- Two large clamshell pockets, sized for tackle boxes, feature updated internal organization based on angler reviews.
- A single, exterior pocket on the angler's right side offers easily accessible storage.
- A fifth, tool holder pocket offers quick access to pliers, line cutters or other fishing gadgets and secures with a hook-and-loop fastener.
- Also features a rod holder, strobe attachment point, reflective accents and knife lash tab.
Panel Mount with SAE
SUMMARY
- The Power Port allows you to quickly and easily add a 12-volt power outlet to your kayak
- Plug-and-play SAE connector allows for direct connection to the Power Panel Switching System, Power Pack Battery Box or Battery Terminal Pigtails
- 4ft. wire
- No cutting or splicing required
- Includes a protective rubber cap
DETAIL
The Power Port is your quick and easy way to add a 12-volt power outlet to your kayak. With the included prewired plug-and-play SAE connectors, you get direct connect to the Power Panel Switching System, Power Pack Battery Box or the Battery Terminal Pigtails. It also comes with a protective rubber cap to keep it safe and dry when not in use.
Whether you’re wanting to simply connect a fish finder to a stowed away battery or have a more serious and robust 12-volt system, the Power Port is your plug-and-play solution, no cutting or splicing required! Spend less time wiring and more time fishing.
Note: Always make sure the Yak-Power plug-and-play connectors are completely pushed together when connecting the system. We use our own custom tooled, high tolerance, very snug fitting SAE connectors with larger gauge, real copper wire to ensure a quality, weatherproof and reliable connection. All Yak-Power plug-and-play accessories are designed specifically to work together while maintaining the correct battery polarity throughout the entire YP system. Using other aftermarket connectors or splicing other connectors into our system may cause damage to the system or the accessories connected to the system. This voids your warranty.
Make sure to pay attention to the wire colors of all YP accessory cables to ensure that the red (+) wire is always connecting to the red (+) wire on the connector into which it’s being plugged.
- Product Weight 1 lb.
- Drill Hole Size 3/4 in.
- MPN YP-PMC48S
Pedal and Crank Arm Upgrade Kit
Includes 2020 pedals and crank arms that come standard on the 701 series Propel Pedal Drive. Retrofittable to all 301 series or newer Propel Pedal Drive units
NOTE: This kit does not include a crank arm puller. The crank arm puller can be purchased on numerous online stores.
SKU: APRO013
Pedal Upgrade Kit
Power-Pole Micro Anchor w/ 8 Ft UL Spike
Power-Pole Micro Spike Driver can hold Jon boats and small skiffs up to 1,500 lbs (including passengers) and is perfect for kayaks and paddle boards. Micro anchor unit is easily-removable making storage or transfer to other vessels simple. Includes quick-release bracket. Other mounting options available including custom mounting brackets or transom mount adapters. Includes 15 ft power cord for 12v battery or if no on-board battery is available, add the Micro Battery Pak & Charger (sold separately) and go wherever adventure takes you. Micro driver unit accommodates any 3/4" spike, including the Power-Pole Ultra-lite 8' Spike.
- Features:
- Lightweight, compact design
- Virtually silent operation
- streamlined user interface
- Includes:
- Adjustable Quick-release Bracket
- 2-button Key Fob Remote
- Advanced Dash Switch
- 15' Power Cord
- 8' Ultra-lite Spike
Power-Pole Micro Battery Pak
Get portable power on the go with the rechargeable Battery Pak for your Power-Pole Micro anchor. This lithium-ion battery has color LEDs to indicate charge status, comes with a one-year warranty and is both water and impact resistant. Includes mounting harness, AC wall adapter and charger.
Propel Indexer
SKU: APRO010
Propel Steering Assembly Kits
Propel Steering Assembly Kits...please note you need to choose your boat, cable or HMPE line, and if a Slayer Propel 10....built before or after February, 2021.
Railmount Storage, 3 pocket Toolholder 2018
- Mounts to groove tracks on select Native kayak models.
- Includes hand-sewn tool holder, two thumb screws, and two slider slugs
SKU: ASTO020
Rod Butt Lay
Seat Back Tackle Box Storage
SKU: ASTO015
Sidekick No Float Wheel Kit
Sidekick Rod Butt Lay
Rod butt lay sets for use with Sidekick set ups. Please choose a single or double recess.
Double Overmount pictured.
SKU: ABUT004, ABUT005
Sidekick Rod Butt Lay
Rod butt lay sets for use with Sidekick set ups. Please choose a single or double recess.
Double Overmount pictured.
SKU: ABUT004, ABUT005
Sidekick Sand Tire Conversion Kit (Legs and Wheels Only)
INCLUDES TWO LONGER LEGS AND TWO SAND TIRES. Fits existing Sidekick Wheel Systems. DOES NOT include the remainder of the Sidekick Wheel System.
Steering Conversion Kit, HMPE line 2019
Rudder line replacement kit for converting to cordage from the metal cable.
Super Seal Scupper Plug Set - No Tether
Super Seal Plugs are multi ribbed with an easy-pull handle.
The plugs create a high pressure seal to keep water from entering the scupper holes. They are simple to use or remove are are low profile with no tether or tall features to trip up on. The plugs can be modified to use a tether and still remain dry. Sold in pairs.**These scupper plugs DO NOT FIT the MANTA RAY 11,12 or 14 models.Titan Propel 10.5/12 2019 and earlier Rudder Gasket Kit- All Plastic Rudder.
SKU: AGAS001
Titan Propel Rod Tip Protectors (set)- Titan 13.5
- Replacement Rod Tip Protectors for the Titan Propels.
Tournament Rail Tool and Tackle Caddy
SKU: ASTO012
Transom Thwart Motor Mount - 14"
This motor mount will allow you to use an electric motor with your Native Watercraft Propel kayak.
The 14″ Thwart Mount for the Slayer Propel Max 10, Slayer Propel Max 12.5, Titan Propel 10.5, Titan Propel 12, Titan Propel 13.5, Ultimate FX Propel 13, Manta Ray Propel 12, and Slayer Propel 12 LT.
Transom Thwart Motor Mount - 14"
This motor mount will allow you to use an electric motor with your Native Watercraft Propel kayak.
The 14″ Thwart Mount for the Slayer Propel Max 10, Slayer Propel Max 12.5, Titan Propel 10.5, Titan Propel 12, Titan Propel 13.5, Ultimate FX Propel 13, Manta Ray Propel 12, and Slayer Propel 12 LT.
Trolley Anchor System
SKU: AATR112
Upper Transmission Rebuild Kit
SKU: APRO005
Yak-Power Battery Terminal Connector with SAE to Spade Pigtail
SUMMARY
- Allows you to plug the Power Panel Switching System, a Power Port or your 12-volt accessory with a Power Plug directly to a 12-volt battery
- Plug-and-play SAE connector to battery spade connector
- 12-inch wire
- Includes two (2) ring terminal adapters for use with larger batteries that don’t have spade connectors
- Compatible with: Power Ports (YP-PMC48S, YP-PMC96S & YP-PMC144S), Power Panel Switching System (YP-RP5R) and Power Plug (YP-SAE4)
DETAILS
The Battery Terminal Pigtail allows you to plug the Power Panel Switching System, a Power Port or your 12-volt accessory with a Power Plug directly to a 12V battery so you can spend less time wiring and more time fishing!
The pigtail includes a watertight, booted fuse holder and a 15A fuse. It also comes with two ring terminal adapters for use with larger batteries that don’t have spade connectors. The Battery Terminal Connector with SAE to Spade Pigtail is compatible with the following:
Power Ports: YP-PMC48S, YP-PMC96S & YP-PMC144S
Power Panel Switching System: YP-RP5R
Power Plug: YP-SAE4
Note: Always make sure the Yak-Power plug-and-play connectors are completely pushed together when connecting the system. We use our own custom tooled, high tolerance, very snug fitting SAE connectors with larger gauge, real copper wire to ensure a quality, weatherproof and reliable connection. All Yak-Power plug-and-play accessories are designed specifically to work together while maintaining the correct battery polarity throughout the entire YP system. Using other aftermarket connectors or splicing other connectors into our system may cause damage to the system or the accessories connected to the system. This voids your warranty.
Make sure to pay attention to the wire colors of all YP accessory cables to ensure that the red (+) wire is always connecting to the red (+) wire on the connector into which it’s being plugged.
- Product Weight 1 lb.
- H x W x L 8 in. x 1 in. x 5 in.
- Wire Gauge 14 AWG
- MPN YP-BTP12
Yak-Power LED Back Lighted Waterproof Inline 12v Switch (16A)
SUMMARY
- Easily turn the power on or off to any 12-volt accessory
- Waterproof 16A switch with red LED backlight indicator
- Plug-and-play SAE connectors
- No cutting or splicing required
- Mounting bracket included
DETAIL
Easily turn the power on or off to any 12-volt accessory with our Waterproof Inline 12-Volt Power Switch. With the same standard plug-and-play SAE connectors used on all Yak-Power products, this switch simply plugs right in, no cutting or splicing required. The switch also has a red LED backlight indicator that lets you know when the switch is on and receiving power.
Most electronics are never truly off, which causes them to draw small amounts of current even when they are turned to the off position. This phenomenon is called parasitic draw and is often why your battery dies when the accessories are all turned off. You can easily add the Power Switch to your main power wire and to your electronics, which allows you to completely kill the power to them when you aren’t using the Power Panel Switching System.
Note: Make sure the plug-and-play connectors are completely pushed together when connecting the system together. Yak-Power uses our own custom tooled, high tolerance, very snug fitting connectors with larger gauge, real copper wire to ensure a quality, weatherproof and reliable connection.
All our plug-and-play accessories are specifically designed to work together while maintaining the correct battery polarity throughout the entire Yak-Power system. Using other aftermarket connectors or splicing other connectors into the YP system may cause damage to the system or the accessories connected to the system and may void your warranty.
Caution: Make sure to pay attention to the actual wire colors of all our accessory cables to ensure that the red (+) wire is always connecting to the red (+) wire on the connector into which it is being plugged.
- Product Weight 0.2 lb
- Current Draw 16 amps
- Wire Gauge 14 AWG
Yak-Power Power Adapter Kit
SUMMARY
- Power adapter kit
- Use only when using the Power Pack Battery Box atop a kayak to reverse power through a Power Port to a Power Panel Switching System stowed away inside the hull
DETAIL
Use our Power Adapter Kit when using the Power Pack Battery Box atop a kayak to reverse power through a Power Port to a Power Panel Switching System stowed away inside the hull. The positive terminal can be exposed when using this kit, so make sure to connect or cover the accessory side of this adapter first, before connecting to the battery. Disconnect the battery side first when disconnecting. Note: Make sure the plug-and-play connectors are completely pushed together when connecting the system together. Yak-Power uses our own custom tooled, high tolerance, very snug fitting connectors with larger gauge, real copper wire to ensure a quality, weatherproof and reliable connection. All our plug-and-play accessories are specifically designed to work together while maintaining the correct battery polarity throughout the entire Yak-Power system. Using other aftermarket connectors or splicing other connectors into the YP system may cause damage to the system or the accessories connected to the system and may void your warranty. Caution: Make sure to pay attention to the actual wire colors of all our accessory cables to ensure that the red (+) wire is always connecting to the red (+) wire on the connector into which it is being plugged.
- Product Weight 1 lb
- Wire Gauge 14 AWG
- MPN YP-BBK-PAK
Yak-Power SAE to USB Charging Dongle
SUMMARY
- Waterproof fully encapsulated design.
- Custom Yak Power keychain float
- Floats (with keychain float)
- Integrated SAE to USB 3 Amp charger
- Yak Power Plug-and-Play connector
DETAIL
Keep your mobile device, action camera, or any other USB powered device fully charged and ready for action! Plugs into any Yak Power system!
- MPN YP-USB2
Yak-Power USB Spot and Safety Light
SUMMARY
- Includes YP-USB2 SAE to USB dongle with keychain float
- Quick disconnect action camera style mounting system
- Includes t-nut for standard accessory rail mounting
- Selectable light modes (dim, bright, SOS flash pattern)
- Remembers last mode when turned On/Off
- Easily plugs into any Yak Power system
DETAIL
Whether you enjoy day fishing or night fishing, its always a good idea to be prepared and have some light. This new Yak Power USB Spot and Safety Light Kit is what you need to stay safe and charged while out on the water.
With USB connectivity and a quick disconnect, action camera style mounting system this kit is the perfect solution for when you get caught out after sunset and need to light up the night to navigate your way back to shore. The light also features an SOS flash mode should you find yourself in distress and need to signal for help. And, just like all Yak-Power accessories, you can plug it in to any Yak-Power system to insure the light is on when you need it.
Also, because the light is USB powered, this kit includes our YP-USB2 charging dongle that you can use during the day to keep your mobile device, action camera, or any other USB powered device fully charged and ready! Then, when night falls, simply plug in your spot light and paddle on back to shore. Yak Power let's you Control the Current, and spend less time rigging and more time fishing.
- Product Weight 0.5 lbs.
- H x W x L 7” x 6” x 2”
- Current Draw Light Modes: Low - 150mA, High - 620mA, SOS Mode - 210mA to 410mA
- Brightness Modes High Mode = 1200 Lumens, Medium Mode = 900 Lumens and BRIGHT SOS Flashing Mode
- MPN YP-USBSL
YakAttack 10Ah Battery Power Kit
The YakAttack Pro Power Battery Kit is a water-resistant lithium-ion rechargeable battery pack that can be used to power your fish finder, LED lights, and more! This 12 volt rechargeable battery pack has a 10Ah capacity with open-ended connectors that can charge and power a variety of electronic devices. Durable, lightweight, and compact, this system is perfect for your next adventure.
For 2020, there were a number of updates to make it more durable, corrosion-resistant in saltwater applications, and easier to use. We added a gold plated coating to all of our connector pins to help reduce the build-up of corrosion in saltwater applications. Additionally, we shortened the DC cable length from 22" to 12" as the extra length wasn't needed and the shorter wire makes it more convenient. Finally, the Nocqua team developed a completely new charger for 2020, and we’re excited to share the details with you.
a) Reverse polarity protection. Combined with the alignment arrows, we added a layer of protection to the charger to indicate improper connection issues, while protecting the charger from potential damage.
b) Dual circuit board protection. The new circuit board protects against overcharging and monitoring how energy is transferred to each cell or to indicate if there's an issue.
c) The battery charge indicator offers a visual reference for charging status. 25% / 50% / 75% / 100%. The other great benefit is using the charger to test a battery level before use. Bonus feature! Connect the charger to the battery to display the current charge level, so you will always know where your battery charge is at prior to use.
- Powered by Nocqua Adventure Gear
- Dimensions: 3.75" x 3.50" x 3"
- Battery weighs 1.4 lbs
- Includes complete 10 Ah lithium-ion battery kit
- Water-resistant and rechargeable
- Six-month warranty
- Made in China
- SKU: PPK-10A
YakAttack 90 Degree MightyMount Adapter
The 90 Degree MightyMount Adapter is more than meets the eye. Compatible with the LockNLoad Mounting System and all of the components this piece heightens the versatility of the LockNLoad system as a whole. First of all, it can be used to add an additional pivot angle for products such as rod holders and fish finder mounts that use the LockNLoad system. Secondly, when combined with MightyBolt products like the VISICarbon Pro you are able to utilize the easy on and off functionality of the LockNLoad system. Finally, when paired with the RotoGrip Paddle Holder and a complete LockNLoad base you are able to increase the overall height of the RotoGrip allowing for use with kayaks where the bow hatch is higher than the GearTrac on the gunwales such as the Bonafide SS, Wilderness Systems ATAK, and Jackson Coosa HD.
There are many ways to utilize this new mount. How will you make it yours?
- For use with the LockNLoad mounting system
- Compatible with YakAttack rod holders, fish finder mounts, and camera mounts
- Gives added articulation point
- Includes 90 degree mounts, bolt, spring, and knob
- Made in the USA
- Covered by our Built for Life Guarantee
- SKU: LNL-1007
YakAttack AR Tube Rod Holder with Track Mounted LockNLoad Mounting System
The YakAttack Advanced Rod Tube™ is our take on the classic tube-style rod holder designed for spinning and casting rods and reels. It features a gimbal lock that flips into place to accommodate longer rods as well as multiple attachment points on the bottom side for rod leashes, increasing gear security. Made from marine grade polymers the AR Tube is built to last and comes with our Built for Life Guarantee. The AR Rod Tube is track-mount ready, and features the LockNLoad™ Mounting System. The LockNLoad system offers unrivaled track-mount security, but its also incredibly easy to adjust. GearTrac not included
There are 3 modes: locked, adjustment, and removal.
- From locked mode, simply squeeze a lever to go into adjustment mode.
- In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you are back in locked mode.
- To go to removal mode, flip the lever out, and the system easily slides off of the track mount.
YakAttack BlackPak Pro Kayak Fishing Crate - 13 x 13
Product Information
Description
The original hard-sided kayak crate just got better. A lot better. Introducing the completely redesigned BlackPak Pro.
The result of intense collaboration and more than a year of R&D and design, the BlackPak Pro is fully riggable and boasts a hinged lid, 25% weight reduction, and best-in-class functionality. Enhancements include many things you might have expected, as well as some true-to-the-brand features that no one saw coming.
Size
The BLP-PRO-13X13 is 13” x 13” x 13” (L,W,H) and weights in at 6.9 lbs. without TetherTubes and 8.2 lbs. with the included three TetherTubes . The BlackPak Pro also comes in two other sizes, 13” x 16” and a 16” x 16”.
Construction and Assembly
Injection-molded from UV stabilized polymers, the BlackPak Pro will last for many years, even in harsh marine environments. The ultra-stiff panels utilize a rib structure that offers exceptional rigidity with minimal weight, while their interlocking joints ensure an intuitive, frustration-free assembly process. Interlocking GridLoc panels utilize a tongue and groove edge design to make assembly a breeze. Just press them together (they won’t fall apart during assembly) and install the (included) stainless steel screws using a simple screwdriver.
Hinged Lid
The water shedding lid with fully adjustable hinges allows you to go from freely pivoting to a sticky setting that maintains the lid position when you let go of it, while integrated overtravel stops keep the lid within reach and limit it to a manageable angle. Sound dampening rubber bumpers ensure quiet closing of the lid, and the unique CatchLatch retention system secures the lid in a simple but surprisingly functional manner.
Rod Holders
The included three TetherTube rod holders with integrated but easily removable hook and tether systems ensure your rods stay put if things go wrong. Caged attachment points on both sides of the tube offer multiple hook points, and the oversized hook design is sized to attach directly to the shaft of your fishing rod if desired. The TetherTube rod holder mounts to the GridLoc panels using at least three of the four standoff pads, enabling several vertical positioning options. Mount them high for rods with long butts, or mount them low to elevate the BlackPak Pro into the HighNDry position.
Tankwell Security
Rubber feet offer noise dampening and isolation, while Omni corner brackets enable multiple hold-down methods. They are designed as attachment points for YakAttack OmniHooks (four of which are included), generic hooks, carabiners, or simple bungee.
Storage
Optimized for a wide variety of tackle boxes, including Plano 3700, Plano Edge, Bass Mafia Bait Coffin, Flambeau, and many more.
Rigability
The key to customizing and accessorizing the BlackPak Pro lies in the highly revolutionary GridLoc 2D mounting system, which offers a plethora of attachment points on the inside and outside of the panels. This gives our design team a platform for which they can design a myriad of dividers, holders, and other attachments. Development of these accessories is already underway!
Features:
- 3 Rod Holders with built-in rod leashes
- Optimized for 3600 sized tackle boxes
- Fits eight 3600 Plano boxes
- Hinged lid with secure latches
- New lightweight construction
- GridLoc Mounting Platform located on every panel
- Rubberized feet and built in noise dampening features
- Internal dimensions (L, W, H) – 11.9” x 11.9” x 11.75”
- External dimensions (L, W, H) – 12.94” x 12.94” x 13.3”
- 6.9 lbs. without TetherTubes and 8.2 lbs. with included three TetherTubes
- When measuring your kayak's tankwell add 2.75" for every side you intend to attach TetherTubes
- Build for use in harsh marine conditions
- Includes stainless steel hardware
- Made in the USA
- Built for Life Guarantee
- SKU: BLP-PRO-13X13
YakAttack BlackPak Pro Kayak Fishing Crate - 13 x 16
Product Information
Description
The original hard-sided kayak crate just got better. A lot better. Introducing the completely redesigned BlackPak Pro.
The result of intense collaboration and more than a year of R&D and design, the BlackPak Pro is fully riggable and boasts a hinged lid, 25% weight reduction, and best-in-class functionality. Enhancements include many things you might have expected, as well as some true-to-the-brand features that no one saw coming.
Size and Weight
The BLP-PRO-13X16 is 13” x 16” x 13” (L,W,H) and weighs in at 7.6 lbs. without TetherTubes and 9.2 lbs. with the included four TetherTubes. The BlackPak Pro also comes in two other sizes, 13”x13” and a 16”x16”.
Construction and Assembly
Injection-molded from UV stabilized polymers, the BlackPak Pro will last for many years, even in harsh marine environments. The ultra-stiff panels utilize a rib structure that offers exceptional rigidity with minimal weight, while their interlocking joints ensure an intuitive, frustration-free assembly process. Interlocking GridLoc panels utilize a tongue and groove edge design to make assembly a breeze. Just press them together (they won’t fall apart during assembly) and install the (included) stainless steel screws using a simple screwdriver.
Hinged Lid
The water shedding lid with fully adjustable hinges allows you to go from freely pivoting to a sticky setting that maintains the lid position when you let go of it, while integrated overtravel stops keep the lid within reach and limit it to a manageable angle. Sound dampening rubber bumpers ensure quiet closing of the lid, and the unique CatchLatch retention system secures the lid in a simple but surprisingly functional manner.
Rod Holders
The included four TetherTube rod holders with integrated but easily removable hook and tether systems ensure your rods stay put if things go wrong. Caged attachment points on both sides of the tube offer multiple hook points, and the oversized hook design is sized to attach directly to the shaft of your fishing rod if desired. The TetherTube rod holder mounts to the GridLoc panels using at least three of the four standoff pads, enabling several vertical positioning options. Mount them high for rods with long butts, or mount them low to elevate the BlackPak Pro into the HighNDry position. Additional TetherTubes are available for purchase as single and two packs.
Tankwell Security
Rubber feet offer noise dampening and isolation, while Omni corner brackets enable multiple hold-down methods. They are designed as attachment points for YakAttack OmniHooks (four of which are included), generic hooks, carabiners, or simple bungee.
Storage
Optimized for a wide variety of tackle boxes, including Plano 3700, Plano Edge, Bass Mafia Bait Coffin, Flambeau, and many more.
Rigability
The key to customizing and accessorizing the BlackPak Pro lies in the highly revolutionary GridLoc 2D mounting system, which offers a plethora of attachment points on the inside and outside of the panels. This gives our design team a platform for which they can design a myriad of dividers, holders, and other attachments. Development of these accessories is already underway!
Features:
- 4 Rod Holders with built-in rod leashes
- Optimized for 3700 sized tackle boxes
- Fits five 3700 tackle boxes
- Hinged lid with secure latches
- New lightweight construction
- GridLoc Mounting Platform located on every panel
- Rubberized feet and built in noise dampening features
- Internal dimensions (L, W, H) – 11.9” x 14.9” x 11.75”
- External dimensions (L, W, H) – 12.94” x 15.94” x 13.3”
- When measuring your kayak's tankwell add 2.75" for every side you intend to attach TetherTubes
- 7.6 lbs. without TetherTubes and 9.2 lbs. with the included four TetherTubes
- Build for use in harsh marine conditions
- Includes stainless steel hardware
- Made in the USA
- Built for Life Guarantee
- SKU: BLP-PRO-13X16
YakAttack BlackPak Pro Kayak Fishing Crate - 16 x 16
The original hard-sided kayak crate just got better. A lot better. Introducing the completely redesigned BlackPak Pro.
The result of intense collaboration and more than a year of R&D and design, the BlackPak Pro is fully riggable and boasts a hinged lid, 25% weight reduction, and best-in-class functionality. Enhancements include many things you might have expected, as well as some true-to-the-brand features that no one saw coming.
Size
The BLP-PRO-16X16 is 16” x 16” x 13” (L,W,H) and weighs in at 9.1 lbs. without TetherTubes and 11.5 lbs. with the included six TetherTubes. The BlackPak Pro also comes in two other sizes, 13” x 13” and a 13” x 16”.
Construction and Assembly
Injection-molded from UV stabilized polymers, the BlackPak Pro will last for many years, even in harsh marine environments. The ultra-stiff panels utilize a rib structure that offers exceptional rigidity with minimal weight, while their interlocking joints ensure an intuitive, frustration-free assembly process. Interlocking GridLoc panels utilize a tongue and groove edge design to make assembly a breeze. Just press them together (they won’t fall apart during assembly) and install the (included) stainless steel screws using a simple screwdriver.
Hinged Lid
The water shedding lid with fully adjustable hinges allows you to go from freely pivoting to a sticky setting that maintains the lid position when you let go of it, while integrated overtravel stops keep the lid within reach and limit it to a manageable angle. Sound dampening rubber bumpers ensure quiet closing of the lid, and the unique CatchLatch retention system secures the lid in a simple but surprisingly functional manner.
Rod Holders
The included six TetherTube rod holders with integrated but easily removable hook and tether systems ensure your rods stay put if things go wrong. Caged attachment points on both sides of the tube offer multiple hook points, and the oversized hook design is sized to attach directly to the shaft of your fishing rod if desired. The TetherTube rod holder mounts to the GridLoc panels using at least three of the four standoff pads, enabling several vertical positioning options. Mount them high for rods with long butts, or mount them low to elevate the BlackPak Pro into the HighNDry position. Additional TetherTubes are available for purchase as single and two packs.
Tankwell Security
Rubber feet offer noise dampening and isolation, while Omni corner brackets enable multiple hold-down methods. They are designed as attachment points for YakAttack OmniHooks (four of which are included), generic hooks, carabiners, or simple bungee.
Storage
Optimized for a wide variety of tackle boxes, including Plano 3700, Plano Edge, Bass Mafia Bait Coffin, Flambeau, and many more.
Rigability
The key to customizing and accessorizing the BlackPak Pro lies in the highly revolutionary GridLoc 2D mounting system, which offers a plethora of attachment points on the inside and outside of the panels. This gives our design team a platform for which they can design a myriad of dividers, holders, and other attachments. Development of these accessories is already underway!
Features:
- 6 Rod Holders with built-in rod leashes
- Optimized for 3700 sized tackle boxes
- Holds seven 3700 boxes with extra room on top for more
- Hinged lid with secure latches
- New lightweight construction
- GridLoc Mounting Platform located on every panel
- Rubberized feet and built in noise dampening features
- Internal dimensions (L, W, H) – 14.9” x 14.9” x 11.75”
- External dimensions (L, W, H) – 15.94” x 15.94” x 13.3”
- When measuring your kayak's tankwell add 2.75" for every side you intend to attach TetherTubes
- 9.1 lbs. without TetherTubes and 11.5 lbs. with the included six TetherTubes
- Build for use in harsh marine conditions
- Includes stainless steel hardware
- Made in the USA
- Built for Life Guarantee
- SKU: BLP-PRO-16X16
YakAttack Cam Strap Single Pack
The YakAttack Cam Straps are an essential for any kayak angler. The high-quality polyester webbing has a higher break strength, superior resistance to abrasion, less stretch, better UV resistance, and increased water resistance compared to common polypropylene straps sold by most companies. The custom rubber buckle cover helps prevent dents and scratches while car topping.
- Sold in a Single Pack
- 3ft or 6 ft. long
- 1 inch wide webbing
- Made with high-quality polyester webbing
- Custom rubber buckle cover
- Buckle and webbing are made in China
- Buckle cover and sewing are done in the USA
- SKU: YEP-1006-06-2PK
YakAttack Cam Straps 12 Feet 2 Pack
The YakAttack Cam Straps are an essential for any kayak angler. The high-quality polyester webbing has a higher break strength, superior resistance to abrasion, less stretch, better UV resistance, and increased water resistance compared to common polypropylene straps sold by most companies. The custom rubber buckle cover helps prevent dents and scratches while car topping.
- Sold in a 2 pack
- 12 ft. long
- 1 inch wide webbing
- Made with high-quality polyester webbing
- Custom rubber buckle cover
- Buckle and webbing are made in China
- Buckle cover and sewing are done in the USA
- SKU: YEP-1006-12
YakAttack Cam Straps 12 Feet 2 Pack
The YakAttack Cam Straps are an essential for any kayak angler. The high-quality polyester webbing has a higher break strength, superior resistance to abrasion, less stretch, better UV resistance, and increased water resistance compared to common polypropylene straps sold by most companies. The custom rubber buckle cover helps prevent dents and scratches while car topping.
- Sold in a 2 pack
- 12 ft. long
- 1 inch wide webbing
- Made with high-quality polyester webbing
- Custom rubber buckle cover
- Buckle and webbing are made in China
- Buckle cover and sewing are done in the USA
- SKU: YEP-1006-12
YakAttack CatchNRelease Drip Rings
YakAttack CatchNRelease Drip Ring - Pair (YEP-1001)
This deep dish CatchNRelease Drip Ring features a unique design which catches water coming off the paddle blade in the high position, and releases it back into the water during your downstroke. We think this is the driest drip ring on the market. Soft and supple, the CatchNRelease Drip Ring is designed to fit all common sized paddle shafts including Werner, Bending Branches, and other popular brands of kayak paddles.
- Sold in a two pack
- Fits standard diameter kayak paddles
- Made in the USA
- SKU: YEP-1001
YakAttack CellBlok
Interior Space - 6.375'' x 4.25'' x 2.60''
Exterior Dimensions - 10.25'' x 6.75'' x 3.50''
CellBlok box only with hardware to attach to GearTrac.
YakAttack Complete LockNLoad Track Base
YakAttack’s LockNLoad™ mounting system, is exactly what you would expect from the leader in track mounting technology. Offering unrivaled track mount security and adjustability, the patent pending LockNLoad™ track base is the most advanced track mount ever created. You want no slip? No problem. The LockNLoad track base attaches quickly and easily with a single MightyBolt™, but will not accidentally rotate or loosen from the track, even when your trolling rod takes a big hit. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6).
- Made in the USA
- Covered by our Built for Life Guarantee
- SKU: LNL-1001
YakAttack Convertible Knobs, 1/4-20 Threads, 6 Pack
- Made in the USA
- Covered by our Built for Life Guarantee
- SKU: CK1420-6
YakAttack DoubleHeader Track Mount
In typical YakAttack fashion, they started as an idea for a single offset RotoGrip Paddle Holder resulted in a product with a bit more versatility. The end result of the DoubleHeader Track Mount was a unique addition to the YakAttack product line that allows the ability to attach various accessories using a single attachment point. If you already own two RotoGrip Paddle Holders, then simply remove the rubber washer included with your paddle holders, insert the MightyBolt through the underside of the DoubleHeader, and tighten the body of the RotoGrip. The DoubleHeader in that configuration provides the perfect offset paddle holder solution moving your paddle off the side of your kayak, freeing up track space. Let’s say you want to add dual Omega Rod Holders for crappie fishing. The mounting holes at the end of the DoubleHeader are LockNLoad compatible and allow for easy attachment of LockNLoad accessories like the Omega or Omega Pro. Looking to maximize the number of rods on your kayak for tournament day? The DoubleHeader Track Mount serves as the perfect mounting system for dual AR Tube Rod Holders.
If you are tight on track space, the DoubleHeader includes an additional feature to add LockNLoad accessories like YakAttack rod holders, camera mounts, and more. Simply replace the stock knob and MightyBolt from the DoubleHeader with the LockNLoad base of a rod holder or other accessories, and you are able to have multiple attachments on a short section of track or a single point of attachment like a MightyMount II. The DoubleHeader track mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory-installed kayak track.
Included with the DoubleHeader are two different Track Disk. These two Track Disks are designed to provide a snug fit in either the standard YakAttack GearTrac (GT90, GTSL90, GT175, MightyMount XL) or the wider opening of the YakAttack Top Loading family of GearTrac (GTTL90 and GTTL175). If a track system came included with your kayak, try both of them and determine which one will provide the best fit.
The DoubleHeader Track Mount is made in the USA from marine grade polymers and is backed by our Built for Life Guarantee.
- Made in the USA
- Built for Life Guarantee
- Single point of attachment
- LockNLoad Compatible
- Includes two sizes of Track Disks
- DoubleHeader is 8.25” wide
- The DoubleHeader Track Mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory installed kayak track.
YakAttack DoubleHeader w/ Dual RotoGrips
In typical YakAttack fashion, they started as an idea for a single offset RotoGrip Paddle Holder resulted in a product with a bit more versatility. The DoubleHeader track mount can serve several different purposes, but in this case, it is the foundation for the perfect offset paddle holder solution that our customers have been dreaming of ever since the launch of the RotoGrip several years back. Compatible with standard diameter kayak paddles the RotoGrip Paddle Holder has become the most widely used paddle holder in the industry. The RotoGrip is a simple yet highly effective paddle holder solution, but many paddlers wanted to use one or two RotoGrips on a single side of the kayak. When using two RotoGrips on a single piece of track, you get a nice tight hold, but you also cover up the entire length of the track with your paddle, rendering open track space useless. The DoubleHeader in this configuration eliminates that problem entirely and offsets the paddle holders off the kayak allowing for the full functionality of the remaining track space for other accessories. If you are tight on track space, the DoubleHeader includes an additional feature to add LockNLoad accessories like YakAttack rod holders, camera mounts, and more. Simply replace the stock knob from the DoubleHeader with the LockNLoad base of a rod holder or other accessories, and you are able to have multiple attachments on a short section of track or a single point of attachment like a MightyMount II. The DoubleHeader track mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory installed kayak track.
Included with the DoubleHeader are two different Track Disk. These two Track Disks are designed to provide a snug fit in either the standard YakAttack GearTrac (GT90, GTSL90, GT175, MightyMount XL) or the wider opening of the YakAttack Top Loading family of GearTrac (GTTL90 and GTTL175). If a track system came included with your kayak, try both of them and determine which one will provide the best fit.
For added paddle security, included with the DoubleHeader and RotoGrip’s are two SnapNStrap Security Tethers. To secure your paddle unhook the bungee tab from the stored position on the base of the DoubleHeader, wrap it around the shaft of your paddle, and loop it over the tab on the outward side of the RotoGrip. This feature will come in handy for kayakers using pedal drive kayaks like a Hobie or motors like a Torqeedo or MotorGuide. In those situations, a paddle might not be needed all the time, so the security tethers provide extra peace of mind knowing your paddle is safe and sound. If you need quick access to your paddle at a moment's notice, the tethers have a stored position, so they do not get in the way when inserting or removing your paddle from the dual RotoGrips.
The DoubleHeader with Dual RotoGrip Paddle Holders is made in the USA from marine grade polymers and is backed by our Built for Life Guarantee.
- Made in the USA
- Built for Life Guarantee
- Single point of attachment
- LockNLoad Compatible
- Includes two RotoGrip Paddle Holders
- Includes two SnapNStrap Security Tethers
- Includes two sizes of Track Disks
- Perfect for anglers with pedal kayaks or motors
- Compatible with standard diameter kayak paddles
- DoubleHeader is 8.25” wide
- The DoubleHeader track mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory installed kayak track.
YakAttack Fish Finder Mount, Helix Series
No more ball mounts, no more slipping or rotating in the track. With the LockNLoad™ mounting system this is the cleanest and most secure mounting solution for the Hummingbird Helix series; 5,7,8, 9, and 10 Features the LockNLoad mounting system offering ultra secure attachment to YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). Hardware included. Patent pending.
- GearTrac not included
- Made in the USA
- Covered by our Built for Life Guarantee
- Patent Pending
- SKU: FPP-1004
YakAttack GearTrac Hardware Kit
- 4 Stainless Steel MightyBolts
- 4 Convertible Knobs
- 4 Track Nuts
- 4 Socket Head Cap Screws
- All Standard 1/4-20 Thread
- Patent Pending
- Made in the USA
- Covered by our Built for Life Guarantee
- SKU: HRC-1004
YakAttack GT Cleat XL
The larger and heavier-duty version to our original GT Cleat, the GT Cleat XL™ is our simple and highly effective answer to the issue of line management. It attaches to all YakAttack® GearTrac™, MightyMount XL tracks, and most other kayak track systems. The GT Cleat XL makes for a perfect companion to our highly popular LeverLoc™ Anchor Trolley and is a low profile, easy to attach and adjust anchor line cleat. The underside of the cleat features two tabs and a rubber washer helping keep the cleat from rotating and sliding in the track from anchor line tension. Best used with 1/2" rope.
- Compatible with YakAttack GearTrac, MightyMount, and most other factory-installed kayak track systems
- Best used with 1/2" rope
- Made in the USA
- Covered by our Built for Life Guarantee
- SKU: MTA-1004
YakAttack GTTL90 GearTrac 8"
3/32 hex wrench not included.
- Designed for harsh