Thanks for registering your Falcon 11!

Now that you have registered your kayak, let us help you create the best experience on the water

Accessories

Adapter Kit Slugs for Groove 1/4-20

Please Note:
-AGRO001 comes with hardware.
-AGRO005 is just the slider slug. Hardware NOT included.

$9.00

Back Pack, Behind Seat

The First Class Seat Pack contours perfectly to the seat frame offering multiple easily accessible storage options. The front has two mesh pockets, the vertical zipper along the side makes it easy to get inside the main pocket without turning around, and the large back pocket is an excellent location for a hydration bladder or other items you want to keep on hand. SKU: APAC001 

$129.00

Cam Straps 12 Feet 2 Pack

The YakAttack Cam Straps are an essential for any kayak angler. The high-quality polyester webbing has a higher break strength, superior resistance to abrasion, less stretch, better UV resistance, and increased water resistance compared to common polypropylene straps sold by most companies. The custom rubber buckle cover helps prevent dents and scratches while car topping.

  • Sold in a 2 pack
  • 12 ft. long
  • 1 inch wide webbing
  • Made with high-quality polyester webbing
  • Custom rubber buckle cover
  • Buckle and webbing are made in China
  • Buckle cover and sewing are done in the USA
  • SKU: YEP-1006-12
$22.95

Cam-Lok Paddle Holder Set Assembly

Cam-Lok Paddle Holders (1 set of two holders) are ingeniously designed to be versatile and easily re-positioned. They can be used in any Groove Track and allow you to keep your paddle lengthwise or across your boat. The internal rubber securely grips and cushions without scratching or generating noise. So easy to use, they make stowing and retrieving paddles practically effortless. Also great for holding rod ends!
$19.00

FX Anchor Trolley System- Floating Pulley

The Tight Line Anchor Trolley System uses two pulleys and a bungee provides constant tension that helps prevent the rope from snagging. Especially convenient in currents and windy waters, adjusting the rope allows you to change the direction you are facing without needing to re-position your anchor. The system also uses reflective rope for safety and to allow the paddler to see the anchor angle when night fishing.
SKU: AANT001
$49.00

Garmin ECHOMAP UHD2 53cv, With GT20-TM Transducer

WHY TALK TO A LOCAL WHEN YOU CAN FISH LIKE ONE?

They say locals know best. But anyone who says that hasn’t fished with the ECHOMAP UHD2 5” and 7” chartplotters with clear, crisp sonar and mapping.


The bright 5” or 7” keyed display is made for convenience.


Get double the views1 with Garmin CHIRP traditional and ClearVü scanning sonars.


What’s under the water looks even better with high-contrast vivid color palettes.


Wi-Fi® connectivity2 between compatible chartplotters makes it easy to share info.


Enjoy No. 1 in mapping3 with Garmin Navionics+ inland and coastal content.

Know the waters, catch more fish.

SONAR SUPPORT

With crisp, clear traditional sonar and brilliant ClearVü sonar, the fish will have nowhere to hide.

VIVID COLOR PALETTES

High-contrast vivid scanning sonar color palettes make it easier than ever to distinguish targets and structure.

BUNDLE YOUR TRANSDUCER

Your ECHOMAP UHD2 device supports a variety of Garmin transducers for two types of sonar: Garmin traditional and ClearVü scanning sonars.

PRELOADED CHARTS

Know the waters you're in as if you grew up fishing them by using built-in Garmin Navionics+ coastal or inland mapping which includes a 1-year subscription for downloadable daily updates and more.

WIRELESS NETWORKING

If you have another compatible ECHOMAP UHD2 chartplotter on your boat, the 5” and 7” models can wirelessly share information — such as sonar, waypoints and routes — with them.

ACTIVECAPTAIN® APP

Built-in Wi-Fi connectivity pairs with the free all-in-one mobile app for access to the OneChart feature, software updates, Garmin Quickdraw Community data and more2.

$399.00

Ketch ID

This product will fit Ketch X, Karbonate, and board & cradle (All sizes)
Slides on your Ketch board for easy maneuvering
Adjustable to fight against sunlight
Comes with ID Card holder
Note: Before applying dual loc to clear ID Holder, clean surface for better adhesion
$29.99

Ketch Keeper

Mount your Ketch Board anywhere
Fits all Ketch Boards
Standard Kit comes with 10-32 3/8” bolts 10-32 t-nuts for t-track X2 each per package.
Krate Kit comes with 10-32 x 1” Nylon lock nuts Washers X4 of each per package.
Stainless Steel Hardware
$26.99

Leverage Landing Net, 20 Inch x 21 Inch Hoop with Foam Extension

The revolutionary forearm grip featured on the Leverage Landing Net offers unparalleled stability and control, while the hinged design allows the handle to fold alongside the net for compact and easy stowage which make the Leverage Landing Net the best net when kayak fishing. The high level of control and accuracy offered by the forearm grip means you don't need a giant hoop to net your next big fish and makes the Leverage Landing Net an essential piece of kayak fishing gear. This model of the Leverage Landing Net features a foam covered extension on the handle allowing for the net to be stored in a tube style or flush mount rod holder. 
  • Revolutionary Forearm Grip
  • Folds for Easy Storage
  • Full Rubber Net
  • Extended Foam Covered Handle
  • Wider, more traditionally designed hoop
  • 20" X 21" Hoop
  • 54" overall length

Leverage Landing Net is a registered trademark of YakAttack, LLC

  • Netting is molded in Taiwan
  • All other components are made and assembled in the USA
  • Covered by our Built for Life Guarantee
$89.95

LeverLoc Anchor Trolley HD

The first anchor trolley designed specifically for the job, the YakAttack LeverLoc™ Anchor Trolley features a LeverLoc™ line clamp, which locks your trolley line in place with a simple “flip of a switch” motion. Keeping the trolley lines in line is the PadHook, a simple but clever design that combines the functionality of both a pad-eye and a hook, keeping even the tightest trolley lines in place on the side of the kayak, not over your gunwale. When not in use, the easy-knot trolley ring snaps into the base of the LeverLoc™, quietly secured until deployed. Includes 35’ of USA made 550 paracord with a highly reflective tracer. This model features the HD option, which gets you two extra PadHooks plus backing plates for the pulleys and LeverLoc™, enabling a heavy duty install when compared to the self-threading screws included in the standard kit. Features YakAttack Stealth Pulleys for super smooth operation. The use of a YakAttack Rigging Bullet, RB1032, is highly recommend for installs where the install location is out of arms reach.

  • Easy installation
  • New YakAttack Stealth Pulleys
  • 35' of highly reflective USA-made 550 paracord
  • Includes all necessary hardware for installation
  • Heavy duty
  • Includes backing plates and extra Padhooks not included in AMS-1003.
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: AMS-1004

 

$44.95

Lowrance Hook2 Fish Finder Mount with Track Mounted LockNLoad Mounting

Designed to replace the factory base on Lowrance Hook2 4 and 5, Reveal 5, and Simrad Cruise 5. This Lowrance Fishfinder Mount is a simple, clean, and a highly effective solution. This mount improves on the original included mount enabling fast and easy one-handed display adjustment. Includes the LockNLoad Mounting System for maximum versatility and rigidity. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6).

  • GearTrac not included
  • Fishfinder not included
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • Patent Pending
  • SKU: FFP-1006
$49.95

Native Karbonate Board

The Ketch Karbonate Measuring Board comes in a high-visibility yellow color that is easy to read and extremely durable. The polycarbonate material of the Karbonate Measuring Board is built to last and comes with a built-in cradle to keep your catch steady and protected so you can quickly make accurate measurements on the water
  • Native Watercraft Branded
  • Available in 26" and 32" sizes
  • KBF Approved
  • High color yellow that’s easy to read and extremely durable.
  • Built in Cradle
  • Compatible with floating kit (coming soon!)
$32.99

Native Kayak Kushion

-Light weight patented technology for more enjoyment

- High quality grade sewing

-Tactical straps with anti slip cam buckles

-Breathable material

-Zipper accessibility

-Non-collapsible & functional
$64.99

Native Ketch X Board

Native Watercraft Branded
Tether holes CNC machined on fence end of the board.
High color contrast that’s easy to read and extremely durable.
Tournament numbers on top of Kradle edge
Ketch Kradle incorporated into board (all one piece)
Widened fence
$69.99

NRS Chinook Fishing PFD

With all the organization and attachment points needed for your fishing accessories, the NRS Chinook Fishing PFD is the world's best-selling life jacket for kayak anglers. Not only is it designed to make you more effective on the water, the comfort of the Chinook simply can't be beat.
  • The Chinook is a Type III, medium profile life jacket delivering 16.0 pounds of flotation.
  • PlushFit™ foam and a high-back design combine to create an extremely comfortable vest for any type of raft or kayak seat.
  • A mesh lower-back offers added ventilation on warm days.
  • Two large, zippered pockets, sized for tackle boxes, with internal organization, plus two smaller accessory pockets with hook-and-loop closure.
  • A fifth, tool holder pocket offers quick access to pliers, line cutters or other fishing gadgets and accessories.
  • Also features a rod holder, strobe attachment point, reflective accents and knife lash tab.
  • The zippered front entry and six adjustment points offer a customized fit.
  • The Chinook carries the US Coast Guard Certification through Underwriters Laboratories (UL).

SIZING

 

Size Chest
XS/M 30"-42"
L/XL 42"-52"
XL/XXL 50"-56"

 

SPECIFICATIONS

Weight: 2 lbs
Category:
  • Fishing Life Jackets
  • Mesh-Back Life Jackets
  • Front-Zip Life Jackets
US Coast Guard Type: III
Profile: Medium
Design Flotation: 16.0 lbs.
Outer Fabric: 400-denier ripstop nylon
Entry System: Front zip
Pockets:
  • 5 - Front
Lash Tabs:
  • 1 - Front
Adjustment System:
  • 4 - Side
  • 2 - Shoulder
  • 1 - Waist
Features:
  • Rod holder loop
  • Strobe holder loop
  • Reflective accents
  • Pockets with internal organization
  • Shoulder strap keepers
$119.95

Paddle Holder Deck Mount

Ever need both hands free to take a photo, reel in a fish, get into your gear or just stop for some water? Well this simple Deck Mounted Paddle Holder allows you to secure your paddle out of the way without worrying about it floating away. It easily attaches to any kind of kayak.
SKU: APAD130
$10.00

Seat Back Tackle Box Storage

Attaches to Native Watercraft frame seats for added tackle storage. Fits onto back of all current Native Watercraft model seats except Manta Ray Angler 12s.
SKU: ASTO015
$69.00

Tournament Rail Tool and Tackle Caddy

Looking for quick access to tools and tackle? This pouch attaches using the Groove Track system and overhangs into the kayak for easy access. Fits the Slayer Propel 10, Slayer Propel 13, Manta Ray Propel Angler 12, Slayer 12, Slayer 14. 5 models. Tools and tackle box not included.
SKU: ASTO012
$59.00

Trolley Anchor System

The Anchor Trolley allows anglers to change the direction they are fishing just by sliding the trolley up or down the length of their boat instead of by moving their anchor. You can control the pulleys while seated to fish 360 degrees around every great fishing spot.
SKU: AATR112
$39.00

YakAttack AR Tube Rod Holder with Track Mounted LockNLoad Mounting System

The YakAttack Advanced Rod Tube™, new for 2019, is our take on the classic tube-style rod holder designed for spinning and casting rods and reels. It features a gimbal lock that flips into place to accommodate longer rods as well as multiple attachment points on the bottom side for rod leashes, increasing gear security. Made from marine grade polymers the AR Tube is built to last and comes with our Built for Life Guarantee. The AR Rod Tube is track-mount ready, and features the LockNLoad™ Mounting System. The LockNLoad system offers unrivaled track-mount security, but its also incredibly easy to adjust through its patented pending design. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6).

The AR Tube attaches to your kayak, boat, or other watercraft with YakAttack’s brand new LockNLoad mounting system, and is exactly what you would expect from the leader in track mounting technology. Offering unrivaled track mount security and adjustability, the patent pending LockNLoad track base is the most advanced track mount ever created. You want no slip? No problem. The LockNLoad track base attaches quickly and easily with a single MightyBolt, but will not accidentally rotate or loosen from the track, even when your trolling rod takes a big hit.

 

There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use:

- From locked mode, simply squeeze a lever to go into adjustment mode.

- In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you are back in locked mode.

- To go to removal mode, flip the lever out, and the system easily slides off of the track mount.

 

This piece of mechanical brilliance is sure to make the LockNLoad the preferred mounting system of kayak anglers for 2018. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6).

 

  • GearTrac not included
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • Patent Pending
  • SKU: RHM-1003
$41.95

YakAttack BlackPak Pro Kayak Fishing Crate - 13 x 13

Product Information

Description

The original hard-sided kayak crate just got better. A lot better. Introducing the completely redesigned BlackPak Pro.  

The result of intense collaboration and more than a year of R&D and design, the BlackPak Pro is fully riggable and boasts a hinged lid, 25% weight reduction, and best-in-class functionality. Enhancements include many things you might have expected, as well as some true-to-the-brand features that no one saw coming.

Size

The BLP-PRO-13X13 is 13” x 13” x 13” (L,W,H) and weights in at 6.9 lbs. without TetherTubes and 8.2 lbs. with the included three TetherTubes . The BlackPak Pro also comes in two other sizes, 13” x 16” and a 16” x 16”.

Construction and Assembly

Injection-molded from UV stabilized polymers, the BlackPak Pro will last for many years, even in harsh marine environments. The ultra-stiff panels utilize a rib structure that offers exceptional rigidity with minimal weight, while their interlocking joints ensure an intuitive, frustration-free assembly process. Interlocking GridLoc panels utilize a tongue and groove edge design to make assembly a breeze. Just press them together (they won’t fall apart during assembly) and install the (included) stainless steel screws using a simple screwdriver.

Hinged Lid

The water shedding lid with fully adjustable hinges allows you to go from freely pivoting to a sticky setting that maintains the lid position when you let go of it, while integrated overtravel stops keep the lid within reach and limit it to a manageable angle. Sound dampening rubber bumpers ensure quiet closing of the lid, and the unique CatchLatch retention system secures the lid in a simple but surprisingly functional manner. 

Rod Holders

The included three TetherTube rod holders with integrated but easily removable hook and tether systems ensure your rods stay put if things go wrong. Caged attachment points on both sides of the tube offer multiple hook points, and the oversized hook design is sized to attach directly to the shaft of your fishing rod if desired. The TetherTube rod holder mounts to the GridLoc panels using at least three of the four standoff pads, enabling several vertical positioning options. Mount them high for rods with long butts, or mount them low to elevate the BlackPak Pro into the HighNDry position.

Tankwell Security

Rubber feet offer noise dampening and isolation, while Omni corner brackets enable multiple hold-down methods. They are designed as attachment points for YakAttack OmniHooks (four of which are included), generic hooks, carabiners, or simple bungee. 

Storage

Optimized for a wide variety of tackle boxes, including Plano 3700, Plano Edge, Bass Mafia Bait Coffin, Flambeau, and many more. 

Rigability

The key to customizing and accessorizing the BlackPak Pro lies in the highly revolutionary GridLoc 2D mounting system, which offers a plethora of attachment points on the inside and outside of the panels. This gives our design team a platform for which they can design a myriad of dividers, holders, and other attachments. Development of these accessories is already underway!

Features:

  • 3 Rod Holders with built-in rod leashes
  • Optimized for 3600 sized tackle boxes
  • Fits eight 3600 Plano boxes
  • Hinged lid with secure latches
  • New lightweight construction
  • GridLoc Mounting Platform located on every panel
  • Rubberized feet and built in noise dampening features
  • Internal dimensions (L, W, H) – 11.9” x 11.9”  x 11.75”
  • External dimensions (L, W, H)  – 12.94” x 12.94”  x 13.3”
  • 6.9 lbs. without TetherTubes and 8.2 lbs. with included three TetherTubes
  • When measuring your kayak's tankwell add 2.75" for every side you intend to attach TetherTubes
  • Build for use in harsh marine conditions
  • Includes stainless steel hardware
  • Made in the USA
  • Built for Life Guarantee
  • SKU: BLP-PRO-13X13
$124.95

YakAttack CatchNRelease Drip Rings

YakAttack CatchNRelease Drip Ring - Pair (YEP-1001)

This deep dish CatchNRelease Drip Ring features a unique design which catches water coming off the paddle blade in the high position, and releases it back into the water during your downstroke. We think this is the driest drip ring on the market. Soft and supple, the CatchNRelease Drip Ring is designed to fit all common sized paddle shafts including Werner, Bending Branches, and other popular brands of kayak paddles.

  • Sold in a two pack
  • Fits standard diameter kayak paddles
  • Made in the USA
  • SKU: YEP-1001
$9.95

YakAttack Complete LockNLoad Track Base

YakAttack’s LockNLoad™ mounting system, is exactly what you would expect from the leader in track mounting technology. Offering unrivaled track mount security and adjustability, the patent pending LockNLoad™ track base is the most advanced track mount ever created. You want no slip? No problem. The LockNLoad track base attaches quickly and easily with a single MightyBolt™, but will not accidentally rotate or loosen from the track, even when your trolling rod takes a big hit. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6).

  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: LNL-1001
$19.95

YakAttack DoubleHeader Track Mount

In typical YakAttack fashion, what started as an idea for a single offset RotoGrip Paddle Holder resulted in a product with a bit more versatility. The end result of the DoubleHeader Track Mount was a unique addition to the YakAttack product line that allows the ability to attach various accessories using a single attachment point. If you already own two RotoGrip Paddle Holders, then simply remove the rubber washer included with your paddle holders, insert the MightyBolt through the underside of the DoubleHeader, and tighten the body of the RotoGrip. The DoubleHeader in that configuration provides the perfect offset paddle holder solution moving your paddle off the side of your kayak, freeing up track space. Let’s say you want to add dual Omega Rod Holders for crappie fishing. The mounting holes at the end of the DoubleHeader are LockNLoad compatible and allow for easy attachment of LockNLoad accessories like the Omega or Omega Pro. Looking to maximize the number of rods on your kayak for tournament day? The DoubleHeader Track Mount serves as the perfect mounting system for dual AR Tube Rod Holders.  

If you are tight on track space, the DoubleHeader includes an additional feature to add LockNLoad accessories like YakAttack rod holders, camera mounts, and more. Simply replace the stock knob and MightyBolt from the DoubleHeader with the LockNLoad base of a rod holder or other accessories, and you are able to have multiple attachments on a short section of track or a single point of attachment like a MightyMount II. The DoubleHeader track mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory-installed kayak track.

Included with the DoubleHeader are two different Track Disk. These two Track Disks are designed to provide a snug fit in either the standard YakAttack GearTrac (GT90, GTSL90, GT175, MightyMount XL) or the wider opening of the YakAttack Top Loading family of GearTrac (GTTL90 and GTTL175). If a track system came included with your kayak, try both of them and determine which one will provide the best fit.

The DoubleHeader Track Mount is made in the USA from marine grade polymers and is backed by our Built for Life Guarantee.

  • Made in the USA
  • Built for Life Guarantee
  • Single point of attachment
  • LockNLoad Compatible
  • Includes two sizes of Track Disks
  • DoubleHeader is 8.25” wide
  • The DoubleHeader Track Mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory installed kayak track.
$19.95

YakAttack DoubleHeader w/ Dual RotoGrips

In typical YakAttack fashion, what started as an idea for a single offset RotoGrip Paddle Holder resulted in a product with a bit more versatility. The end result of the DoubleHeader Track Mount was a unique addition to the YakAttack product line that allows the ability to attach various accessories using a single attachment point. If you already own two RotoGrip Paddle Holders, then simply remove the rubber washer included with your paddle holders, insert the MightyBolt through the underside of the DoubleHeader, and tighten the body of the RotoGrip. The DoubleHeader in that configuration provides the perfect offset paddle holder solution moving your paddle off the side of your kayak, freeing up track space. Let’s say you want to add dual Omega Rod Holders for crappie fishing. The mounting holes at the end of the DoubleHeader are LockNLoad compatible and allow for easy attachment of LockNLoad accessories like the Omega or Omega Pro. Looking to maximize the number of rods on your kayak for tournament day? The DoubleHeader Track Mount serves as the perfect mounting system for dual AR Tube Rod Holders.  

If you are tight on track space, the DoubleHeader includes an additional feature to add LockNLoad accessories like YakAttack rod holders, camera mounts, and more. Simply replace the stock knob and MightyBolt from the DoubleHeader with the LockNLoad base of a rod holder or other accessories, and you are able to have multiple attachments on a short section of track or a single point of attachment like a MightyMount II. The DoubleHeader track mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory-installed kayak track.

Included with the DoubleHeader are two different Track Disk. These two Track Disks are designed to provide a snug fit in either the standard YakAttack GearTrac (GT90, GTSL90, GT175, MightyMount XL) or the wider opening of the YakAttack Top Loading family of GearTrac (GTTL90 and GTTL175). If a track system came included with your kayak, try both of them and determine which one will provide the best fit.

The DoubleHeader Track Mount is made in the USA from marine grade polymers and is backed by our Built for Life Guarantee.

  • Made in the USA
  • Built for Life Guarantee
  • Single point of attachment
  • LockNLoad Compatible
  • Includes two sizes of Track Disks
  • DoubleHeader is 8.25” wide
  • The DoubleHeader Track Mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory installed kayak track.
$39.95

YakAttack GearTrac Hardware Kit

Includes four of each: Convertible Knobs, 1-1/2'' MightyBolts, Track Nuts, 1-1/4'' Socket Head Cap Screws. All standard 1/4-20 thread. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6).
  • 4 Stainless Steel MightyBolts
  • 4 Convertible Knobs
  • 4 Track Nuts
  • 4 Socket Head Cap Screws
  • All Standard 1/4-20 Thread
  • Patent Pending
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: HRC-1004
$24.95

YakAttack GT Cleat XL

The larger and heavier-duty version to our original GT Cleat, the GT Cleat XL™ is our simple and highly effective answer to the issue of line management. It attaches to all YakAttack® GearTrac™, MightyMount XL tracks, and most other kayak track systems. The GT Cleat XL makes for a perfect companion to our highly popular LeverLoc™ Anchor Trolley and is a low profile, easy to attach and adjust anchor line cleat. The underside of the cleat features two tabs and a rubber washer helping keep the cleat from rotating and sliding in the track from anchor line tension.  Best used with 1/2" rope.

  • Compatible with YakAttack GearTrac, MightyMount, and most other factory-installed kayak track systems
  • Best used with 1/2" rope
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: MTA-1004
$19.95

YakAttack HD Mount LockNLoad

YakAttack’s LockNLoad™ mounting system is exactly what you would expect from the leader in track mounting technology. Now, enjoy the versatility and ingenuity of the LockNLoad System in heavy duty applications such as trolling for big game. Due to the two MightyBolt attachment points, the HD Track Mount gives you more gear security than ever before! No track? No problem! You can easily remove the two MightyBolts and use hardware to quickly deck mount your YakAttack rod holder or fish finder, as well as using holes from old-school deck mounts to mount the HD Track Mount crossways. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack and a six pack.

 

  • Two MightyBolt attachment points gives you better gear security
  • Not for use with under 8" of track
  • For Heavy Duty applications
  • Can be used for deck mounting
  • Utilizes pre-drilled holes from old-school deck mounts to be mounted crossways
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: LNL-1006
$19.95

YakAttack Horizontal Tie Downs

This track mounted tie-down allows a quick and easy attachment point for webbing, small ropes, and bungee in configurations in which the Vertical Tie Down is not ideal. Perfect for securing Blackpaks™, other crate systems, and large gear bags in a kayak tankwell. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack and a six pack.

  • Sold in 2 pack
  • Attaches to YakAttack® GearTrac™, MightyMounts, and most other factory installed kayak track
  • Use with 1"-1.5" webbing straps or bungee
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: AAP-1027

$19.95

YakAttack MightyMount XL 12"

Designed as a robust but economical mount for longer footprint areas, the MightyMount XL can be installed with screws and nuts, self-threading screws, or even tri-fold rivets! Compatible with all YakAttack track mounted accessories, this injection molded mount functions similar to a GearTrac, and allows t-bolt accessories to be installed from either end. A simple twist allows quick and easy position adjustment, but a few extra turns are required to remove the accessory, giving the MightyMount XL the same gear security features of the original YakAttack MightyMount, with all of the adjustability of our GearTrac. A textured upper surface adds grip while making the MightyMount XL one of the best looking accessory mounts on the market.

  • 1.75" wide x 12" long
  • .38” tall
  • Includes #10 stainless steel self-threading screws 
  • Made in the USA
  • Made from premium materials designed for use in harsh marine environments   
  • Usable track length - 10.5"
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: MMXL-12
$16.95

YakAttack MultiMount Cup Holder

YAKATTACK MULTIMOUNT CUP HOLDER

The YakAttack MultiMount Cup Holder quickly and easily attaches to YakAttack GearTrac, MightyMount, Native Watercraft gear track, Bonafide Kayaks Gear Track and most other kayak track systems.


Designed for maximum versatility, the MultiMount Cup Holder accepts anything from stainless steel tumblers to Nalgene Bottles to 12 oz cans and water bottles.
The MultiMount Cup Holder also makes a great place to put small tools and other items. Made from premium materials for a lifetime of use in even the harshest environments.
Keep your beverage at reach while kayak fishing with the MultiMount Cup Holder!

KEY FEATURES

  • Fits various different size beverage containers
  • Large enough to store a can with a koozie
  • GearTrac and MightyMount ready without any additional components
  • Bottle not included

$19.95

YakAttack Omega Pro Rod Holder

The YakAttack Omega Pro series rod holders are the last rod holder you’ll ever need. 

The Omega Pro adds an extension arm to help get your reel higher off the water or helps accommodate longer rod butts.

The Omega Pro Rod Holder is a truly universal solution that works flawlessly with spinning, casting, larger conventional reels, and yes – even fly rods of all sizes. A 360 degree rotating collar offers the ability to quickly secure the rod by capturing the reel, and allows spinning reels to be stowed in the natural downward position, not hung off the side. Multiple modes allow anglers to easily stage rods for quick access or lock them in for maximum security. 

The Omega Pro Rod Holder attaches to your kayak, boat, or other watercraft with YakAttack’s LockNLoad mounting system, and is exactly what you would expect from the leader in track mounting technology. 

Offering unrivaled track mount security and adjustability, the patent pending LockNLoad track base is the most advanced track mount ever created. You want no slip? No problem. The LockNLoad track base attaches quickly and easily with a single MightyBolt, but will not accidentally rotate or loosen from the track, even when your trolling rod takes a big hit. 

Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. 

There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use: 
- From locked mode, simply squeeze a lever to go into adjustment mode. 
- In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you back in locked mode. 
- To go to removal mode, flip the lever out, and the system easily slides off of the track mount. 

  • Gear Trac not included
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • Patent Pending
$39.95

YakAttack Omega Rod Holder with Track Mounted LockNLoad Mounting System

The YakAttack Omega series rod holders are the last rod holder you’ll ever need.

The Omega Rod Holder is a truly universal solution that works flawlessly with spinning, casting, larger conventional reels, and yes – even fly rods of all sizes. A 360 degree rotating collar offers the ability to quickly secure the rod by capturing the reel, and allows spinning reels to be stowed in the natural downward position, not hung off the side. Multiple modes allow anglers to easily stage rods for quick access or lock them in for maximum security.

The Omega Rod Holder attaches to your kayak, boat, or other watercraft with YakAttack’s LockNLoad mounting system, and is exactly what you would expect from the leader in track mounting technology.

Offering unrivaled track mount security and adjustability, the patent pending LockNLoad track base is the most advanced track mount ever created. You want no slip? No problem. The LockNLoad track base attaches quickly and easily with a single MightyBolt, but will not accidentally rotate or loosen from the track, even when your trolling rod takes a big hit.

Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear.

There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use:
- From locked mode, simply squeeze a lever to go into adjustment mode.
- In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you back in locked mode.
- To go to removal mode, flip the lever out, and the system easily slides off of the track mount.

  • Gear Trac not included
  • Made in the USA
  • Covered by our Built for Life 
$31.95

YakAttack ParkNPole 7'8"

The YakAttack ParkNPole 7'8" is the updated version of our ParkNPole 8' that better complies with UPS shipping restrictions.
 
Used as a stakeout/push pole for kayaking, this product has many great features including a floating base, a fiberglass body, and a foot and tip that are UV stable and made of wear-resistant nylon. Lightweight and incredibly durable, this product makes the perfect companion for fishing in shallow waters.
  • Foot for paddling
  • Tip for staking into the ground
  • 7' 8" long
  • .845'' Diameter Tubing
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: PNP78
$99.95

YakAttack ParkNPole Link 8'

The ParkNPole Link™ is a smarter, two-piece version of the popular 8' ParkNPole™. The two-piece construction makes transportation easy to and from the water or makes it possible to store inside the hull of your fishing kayak. For a longer option purchase the 46'' extension making the total length 12'. At 12 feet, the ParkNPole Link™ plus the extension, make for a great push pole and also helps when anchoring in deeper water. Made from specially formed fiberglass and UV stabilized, wear resistant nylon. At 1.8 lbs, it is incredibly lightweight and extremely durable.

  • 8' long
  • .845'' Diameter Tubing 
  • Purchase the 46" extension for an extended length of 12'
  • Wear-resistant nylon tip and foot with a fiberglass body
  • Weights only 1.8 lbs, yet is extremely durable.
  • The two-piece construction allows for easy transportation and storage.
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: PNPL-8
$129.95

YakAttack ParkNPole RotoGrip

Since launching the YakAttack ParkNPole a number of years ago customers have been requesting a track mounted solution to secure their stakeout pole. This product is compatible with every length of YakAttack ParkNPole including the 6', 7' 8", and 8' Link. Using our popular RotoGrip platform, larger wheels were designed to perfectly secure the 0.84” ParkNPole diameter tubing. Super low profile at 2.4" tall, the ParkNPole RotoGrip secures the shaft between two soft rollers, securing your stakeout pole quietly and with just the right amount of tension. Sold as a single pack.

To secure your ParkNPole off the side of your kayak, the ParkNPole RotoGrip pairs nicely with a set of SideArm Track Mounts or the DoubleHeader Track Mount. Compatible with YakAttack MightyMount’s, GearTrac, and most other factory installed kayak track systems and aftermarket track from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack and a six pack.

  • Utilizes the Mighty Bolt to attach to kayak track
  • 2.4" tall
  • GearTrac not included
  • Single pack
  • Patent Pending
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: GRP-1004
$16.95

YakAttack RotoGrip Paddle Holder

Voted Product of the Year for Yak Angler's Kayak Anglers Choice Awards for 2016. 

The YakAttack RotoGrip™ Paddle Holder sheds a new light on the age old problem of paddle management. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). Kayak and SUP anglers have lots of options for installing and configuring this handy little gadget. Super low profile at 2.25" tall, the RotoGrip™ Paddle Holder grips the paddle shaft between two soft rollers, securing your paddle quietly and with just the right amount of tension. Sold in single packs.

  • Utilizes the Mighty Bolt to attach to kayak track
  • 2.25" tall
  • GearTrac not included
  • Single pack
  • Patent Pending
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: GRP-1001

$16.95

YakAttack Rotogrip SnapNStrap 2 Pack

The SnapNStrap Security Tether was specifically designed for the YakAttack RotoGrip Paddle Holder; RotoGrip not included. It acts as a simple hook and loop system using bungee to add extra security and peace of mind knowing your paddle is safe and secure. To attach the SnapNStrap system, simply remove the rubber washer and MightyBolt from your RotoGrip and slide on the molded frame with the two tabs facing upwards. Apply a little pressure, and the system will snap in place. From there, reassemble the washer and MightyBolt. To secure your paddle, wrap the bungee and pull tab over the shaft of your paddle and loop it over the tab of the SnapNStrap frame.

  • RotoGrip not included
  • Tool-less attachment
  • Compatible with the RotoGrip Paddle Holder
  • Sold as a 2 pack
  • Made in the USA
  • Lifetime Warranty
$7.95

YakAttack Round Base Fish Finder Mount with Track Mounted LockNLoad Mounting System

No more ball mounts, no more slipping or rotating in the track. With the LockNLoad™ mounting system this is the cleanest and most secure mounting solution for Garmin and Raymarine units featuring a 3 hole pattern round base such as the Garmin Striker 4 and the Raymarine Dragonfly 7 Pro. Features the LockNLoad mounting system offering ultra secure attachment, compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack and a six pack.

Hardware included.

  • GearTrac not included
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • Patent Pending
  • SKU: FFP-1005
$49.95

YakAttack SideArm Track Mount

The YakAttack SideArm Track Mount was born out of using existing products to solve a rigging problem. Instead of using a standard 4” Extension Arm with a longer MightyBolt to offset a RotoGrip Paddle Holder, we created an off-the-shelf solution that accomplishes the task and then some. Any YakAttack track-mounted product that uses a single MightyBolt is compatible with the MightyMount at the end of the SideArm. You can also replace the knob of the SideArm with a LockNLoad accessory like a YakAttack Omega Rod Holder or PanFish Portrait Camera Mount. This feature provides the opportunity to mount two accessories from a single point. The RotoGrip Paddle Holder and ParkNPole RotoGrip are two commonly used accessories with the SideArm Track Mount.

Included with the SideArm Track Mount are two different Track Disk. These two Track Disks are designed to provide a snug fit in either the standard YakAttack GearTrac (GT90, GTSL90, GT175, MightyMount XL) or the wider opening of the YakAttack Top Loading family of GearTrac (GTTL90 and GTTL175). If a track system was included with your kayak, try both of them and determine which one will provide the best fit. Only one Track Disk is needed on the underside of the SideArm for the mount to work as designed. In addition, the Track Disks allow for the SideArm to be mounted in any direction in relation to the track or MightyMount it is attached to. For example, you can set up the SideArm directly off the side of your kayak for a paddle holder solution or having it facing inwards and virtually 360º anywhere in between.

Compatible with YakAttack MightyMount’s, GearTrac, and most other factory installed kayak track systems and aftermarket track from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack and a six pack.

The SideArm Track Mount is made in the USA from marine grade polymers and is backed by our Built for Life Guarantee.

  • Made in the USA
  • Built for Life Guarantee
  • Single point of attachment
  • LockNLoad Compatible
  • Includes two sizes of Track Disks
  • The SideArm Track Mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory installed kayak track.
  • SKU: TMA-1003
$19.95

YakAttack SideWinder Anchor Line Reel, Includes Track Hardware and 75 Feet of 550 Paracord

Get your anchor line under control with the YakAttack SideWinder! Designed to make anchor line management simple and effective, the YakAttack SideWinder has some great features packed into a simple and effective design. The line lock groove keeps just the right amount of line deployed, and the tail rope passage means it can be deployed outside your kayak anchor trolley ring for true quick release in dangerous situations. For flat water with no current, use the track mount holes in conjunction with the included Mighty Bolts and knobs to attach the SideWinder directly to your kayak's track system.
  • Includes hardware for install onto your kayak's track system
  • Includes 75 feet of 550 paracord
  • 14"x6.38"x0.75"
  • Geartrac not included
$34.95

YakAttack Surface Mount Retractor

Secure your gear without bulky leashes or floats using the YakAttack Surface Mount Retractor. This super versatile unit combines the innovation you've come to expect from YakAttack and genuine T-Reign retracting mechanism, 36" Kevlar cord, and a removable 4" tether. Designed for surface mounting, this kit comes complete with blunt end thread forming screws for threading directly into rotomolded and thermoformed kayaks.
  • Made from UV Resistant High Density Polyethylene
  • 36" Kevlar Cord
  • Removable 4" tether
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: RET-1001
$29.95

YakAttack Tie-Down Eyelets 2 pack

These tie-downs come with a Mighty Bolt base. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). Perfect as an anchoring point to secure a cooler or other accessory, as well as being a great adjustment point for directing steering cables on the deck of your kayak. Sold in a two-pack.
 
  • Patent Pending
  • 2 Pack
  • Made of stainless steel
  • Compatible with GearTrac, MightyMounts, and most other factory-installed track systems
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: AAP-1016
$16.95

YakAttack Torqeedo Throttle Mount

YakAttack Torqeedo Throttle Mount with Track Mounted LockNLoad Mounting System (TQM-1001)

Featuring the LockNLoad mounting system this throttle mount is a great solution for attaching your Torqeedo throttle to YakAttack GearTrac, MightyMount II, MightyMount XL or most other factory-installed kayak track. The LockNLoad base gives you peace of mind offering an ultra secure install, but is also very easy to adjust on the water and attach or remove. Includes all necessary hardware. Patent pending. Torqeedo throttle not included. Compatible with YakAttack MightyMounts, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack and a six pack.

The LockNLoad track mount system is the most innovative mounting system on the market, and is exactly what you'd expect from the industry leaders in track mounting technology. There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use:

  • From locked mode, simply squeeze a lever to go into adjustment mode.
  • In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the accessory is completely secure while making adjustments. Let go of the lever and you are back in locked mode.
  • To go to removal mode, flip the lever out, and the system easily slides off of the track mount.
  • GearTrac and Torqueedo throttle not included
  • Made in the USA
  • Patent Pending
  • SKU: TQM-1001

 



$49.95

YakAttack Track Mounted Retractor

Secure your kayak fishing gear without bulky leashes or floats using the YakAttack Track Mount Retractor. This super versatile unit combines the innovation you've come to expect from YakAttack and genuine T-Reign retracting mechanism, 36" Kevlar cord, and a removable 4" tether. Designed for track mounting, this kit comes complete with everything you need.
GearTrac not included.


  • UV Resistant High Density Polyethylene
  • 36" Kevlar Cord
  • Removable 4" tether
$34.95

YakAttack Track Nut Kit, 6pk

1/4-20 track nut. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible.
  • Pack of 6 track nuts
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: TN-1420-6
$11.95

YakAttack Universal Mounting Plate

This product is a DIY mount and you will be required to drill holes to mount something like a Humminbird PiranhaMAX 4 to the mounting plate. Since every install will most likely be different no extra screws, nuts, or washers are included, and it is up to the user to find their own hardware for this install.
  • Mounting plate is 6" x 3.5"
  • Made in the USA
  • GearTrac not included
$49.95

YakAttack Vertical Tie Downs Track Mount 2 pack

The YakAttack Track Mount Vertical Tie Downs come with a Mighty Bolt base.
$19.95

YakAttack Zooka II Rod Holder with Track Mounted LockNLoad Mounting System

Zooka II™ Rod Holder with Track Mounted LockNLoad™ Mounting System

The YakAttack Zooka II™ Rod Holder is based off our top selling Zooka Tube which we sold for a number of years. It was one of the first rod holders on the market to look different and function differently with no moving parts on the body of the rod holder and used the specific geometry of spinning and casting rods and reels to lock your gear in place without having to move or secure rotating collars or straps. The new and improved Zooka II features the highly popular LockNLoad™ Mounting System and includes a 4" extension similar to the Omega Pro Rod Holder. Compared to the original Zooka Tube, we have altered the size and geometry of the Zooka II Rod Holder to better accept larger conventional gear and will accommodate just about any rod other than a fly rod. For everyone that enjoyed using the old Zooka Tube or even currently uses it this one is for you and we know you will enjoy the updated, improved, and more secure YakAttack Zooka II Rod Holder.

The Zooka II attaches to your kayak, boat, or other watercraft with YakAttack’s brand new LockNLoad mounting system, and is exactly what you would expect from the leader in track mounting technology. Offering unrivaled track mount security and adjustability, the patent pending LockNLoad track base is the most advanced track mount ever created. You want no slip? No problem. The LockNLoad track base attaches quickly and easily with a single MightyBolt, but will not accidentally rotate or loosen from the track, even when your trolling rod takes a big hit.

There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use:

  • From locked mode, simply squeeze a lever to go into adjustment mode.
  • In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you are back in locked mode.
  • To go to removal mode, flip the lever out, and the system easily slides off of the track mount.

Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack and a six pack.

  • GearTrac not included
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • Patent Pending
$41.95

Follow us on social media!