Thanks for registering your Titan X Propel 12.5!

Now that you have registered your kayak, let us help you create the best experience on the water


Captain's Bridge Accessory Mount Crossbar

Create the ultimate kayak fishing console with the Captain's Bridge. With dual mounting tracks on the top of the console as well as a track running down each side, their are many ways to mount you fish finders and other kayak fishing accessories.

1. Mounting width on the kayak: The Captain's Bridge will fit on a wide variety of fishing kayak models. For models with gear tracks on the port and starboard sides, it can slide right into the tracks. For models that do not have tracks but a flat surface, anglers can add YakAttack Mighty Mounts to attach the Captain's Bridge. You can measure the width of where you would like to place the Captain's Bridge. Here are the maximum mounting widths required:
    • The maximum mounting width of the 26" Captain's bridge is 25" 
    • The Maximum mounting width of the 32" Captain's bridge is 31"
      • Additional Note regarding the Titan X and PWR Mounting:  The 26" and the 32" will both fit on the Titan X in the bow mounting area and across the gunnel. If you are using a Pedal Drive you will want to mount in the bow area. For the PWR, both sizes will fit on the bow mounting area of the PWR and only the 32" will fit across the gunnel.
  • Tip: When going more towards the bow of the boat, the 26" might be better whereas mounting on the gunnels may be a better fit for the 32" due to the mounting width requirements stated above.

2. The screen size for your graphs: For example: If you are wanting to put dual monitors over 9" you may want to use the 32" to provide more space on the bar.


Dakota Lithium 12v 23Ah USB Battery

Dakota Lithium 12 Volt 23 packs a big punch in a small package. With both USB 3.0 waterproof plugs, standard F2 Terminals, and a built in volt meter, this LiFePO4 battery gives you the freedom, power, and reliability to #GoFurther and #PlayHarder in the most extreme of conditions. Built from Dakota Lithium’s legendary LiFePO4 cells, this battery has 2X the power, 1/3 the weight and 5X the lifespan of traditional batteries — providing exceptional lifetime value, all backed up by Dakota Lithium’s best in class 11 year warranty. Dakota Lithium Iron Phosphate technology provides optimal performance down to minus 20 degrees Fahrenheit (for winter warriors) and the 23 Amp hours of capacity provides a full day of power for high amp draw electronics like Garmin fish finders, graphs, or anything where you need a longer run time. Voltmeter allows you to monitor the battery capacity and the USB ports allow easy charging of cell phones, GoPro, and personal electronics. Same performance as our legendary 10 Ah battery, but with 130% more capacity. LiFePO4 charger recommended.



Native Watercraft Kayak Covers

Native Watercraft kayak covers are custom made to fit our kayaks just right. Each cover includes a full set of cover tie down straps (one for each loop set) that can be used to secure the cover when traveling through the sewn in loops on the cover. All covers are made in USA and created with marine-grade anti-wick thread that includes double-stitched construction and 4-ply join seams.

Native Watercraft Ketch X Board

Native Watercraft Branded
Tether holes CNC machined on fence end of the board.
High color contrast that’s easy to read and extremely durable.
Tournament numbers on top of Kradle edge
Ketch Kradle incorporated into board (all one piece)
Widened fence


NRS Chinook Fishing PFD

The evolution of NRS Chinook Fishing PFD, our best-selling life jacket, depends on our designers listening to the reviews of anglers around the world. And we do. With reconfigured pocket designs, the Chinook makes catching the adventure safer and more effective on the water.

  • The Chinook is a Type III, medium profile life jacket delivering 16.5 pounds of flotation.
  • Zippered front entry for quick donning and six adjustment points for a customized fit.
  • PlushFit™ foam and a high-back design combine to create an extremely comfortable vest for any type of raft or kayak seat.
  • A mesh lower-back offers added ventilation on warm days.
  • Two large clamshell pockets, sized for tackle boxes, feature updated internal organization based on angler reviews.
  • A single, exterior pocket on the angler's right side offers easily accessible storage.
  • A fifth, tool holder pocket offers quick access to pliers, line cutters or other fishing gadgets and secures with a hook-and-loop fastener.
  • Also features a rod holder, strobe attachment point, reflective accents and knife lash tab.

Power-Pole Micro Anchor w/ 8 Ft UL Spike

Power-Pole Micro Spike Driver can hold Jon boats and small skiffs up to 1,500 lbs (including passengers) and is perfect for kayaks and paddle boards. Micro anchor unit is easily-removable making storage or transfer to other vessels simple. Includes quick-release bracket. Other mounting options available including custom mounting brackets or transom mount adapters. Includes 15 ft power cord for 12v battery or if no on-board battery is available, add the Micro Battery Pak & Charger (sold separately) and go wherever adventure takes you. Micro driver unit accommodates any 3/4" spike, including the Power-Pole Ultra-lite 8' Spike.

  • Lightweight, compact design
  • Virtually silent operation
  • streamlined user interface
  • Adjustable Quick-release Bracket
  • 2-button Key Fob Remote
  • Advanced Dash Switch
  • 15' Power Cord
  • 8' Ultra-lite Spike

TitanX Propel 12.5 Bow Motorization Kits

Power Up your TitanX with the Bow Motorization Kits:
Our bow motorization kit includes:
-Breaker, Waterproof Manual Reset 60Amp
-Screws and Nuts for Installations
-Rod Sock to cover wiring
-Wiring: 8 Gauge Black Red Zipper Wire
-Dakota Lithium Connect-Ease 12 Volt Trolling Motor Connection Kit
-Heat Shrink Sleeves 1/2"
-Connector, 8 Gauge Butt Connector
-Lugs, 8-gauge Copper Lug
-Rope for Lift/Lower Lines
-Lift/Lower Knobs
-Pull Handle for Lift/Lower Lines
-Deck Line Guides
-Spectra Cable
-Knob Rest
-Bow Motor Mount (if applicable)
-MotorGuide Xi3 Quick Release Bracket
-MotorGuide Trolling Motor Receptacle
-MotorGuide Trolling Motor Plug
-YakAttack GT Cleat XL
-YakAttack Through Hull Wiring Kit(s)
-TitanX Bow Motor Mount
Plus the Battery and Motor if you select those options.

YakAttack BlackPak Pro Kayak Fishing Crate - 16 x 16

Product Information


The original hard-sided kayak crate just got better. A lot better. Introducing the completely redesigned BlackPak Pro. 

The result of intense collaboration and more than a year of R&D and design, the BlackPak Pro is fully riggable and boasts a hinged lid, 25% weight reduction, and best-in-class functionality. Enhancements include many things you might have expected, as well as some true-to-the-brand features that no one saw coming.


The BLP-PRO-16X16 is 16” x 16” x 13” (L,W,H) and weighs in at 9.1 lbs. without TetherTubes and 11.5 lbs. with the included six TetherTubes. The BlackPak Pro also comes in two other sizes, 13” x 13” and a 13” x 16”.

Construction and Assembly

Injection-molded from UV stabilized polymers, the BlackPak Pro will last for many years, even in harsh marine environments. The ultra-stiff panels utilize a rib structure that offers exceptional rigidity with minimal weight, while their interlocking joints ensure an intuitive, frustration-free assembly process. Interlocking GridLoc panels utilize a tongue and groove edge design to make assembly a breeze. Just press them together (they won’t fall apart during assembly) and install the (included) stainless steel screws using a simple screwdriver.

Hinged Lid

The water shedding lid with fully adjustable hinges allows you to go from freely pivoting to a sticky setting that maintains the lid position when you let go of it, while integrated overtravel stops keep the lid within reach and limit it to a manageable angle. Sound dampening rubber bumpers ensure quiet closing of the lid, and the unique CatchLatch retention system secures the lid in a simple but surprisingly functional manner. 

Rod Holders

The included six TetherTube rod holders with integrated but easily removable hook and tether systems ensure your rods stay put if things go wrong. Caged attachment points on both sides of the tube offer multiple hook points, and the oversized hook design is sized to attach directly to the shaft of your fishing rod if desired. The TetherTube rod holder mounts to the GridLoc panels using at least three of the four standoff pads, enabling several vertical positioning options. Mount them high for rods with long butts, or mount them low to elevate the BlackPak Pro into the HighNDry position. Additional TetherTubes are available for purchase as single and two packs.  

Tankwell Security

Rubber feet offer noise dampening and isolation, while Omni corner brackets enable multiple hold-down methods. They are designed as attachment points for YakAttack OmniHooks (four of which are included), generic hooks, carabiners, or simple bungee. 


Optimized for a wide variety of tackle boxes, including Plano 3700, Plano Edge, Bass Mafia Bait Coffin, Flambeau, and many more. 


The key to customizing and accessorizing the BlackPak Pro lies in the highly revolutionary GridLoc 2D mounting system, which offers a plethora of attachment points on the inside and outside of the panels. This gives our design team a platform for which they can design a myriad of dividers, holders, and other attachments. Development of these accessories is already underway!


  • 6 Rod Holders with built-in rod leashes
  • Optimized for 3700 sized tackle boxes
  • Holds seven 3700 boxes with extra room on top for more
  • Hinged lid with secure latches
  • New lightweight construction
  • GridLoc Mounting Platform located on every panel
  • Rubberized feet and built in noise dampening features
  • Internal dimensions (L, W, H) – 14.9” x 14.9”  x 11.75”
  • External dimensions (L, W, H)  – 15.94” x 15.94”  x 13.3”
  • When measuring your kayak's tankwell add 2.75" for every side you intend to attach TetherTubes
  • 9.1 lbs. without TetherTubes and 11.5 lbs. with the included six TetherTubes
  • Build for use in harsh marine conditions
  • Includes stainless steel hardware
  • Made in the USA
  • Built for Life Guarantee
  • SKU: BLP-PRO-16X16

Follow us on social media!